Veise G1

Product Usage Instructions
- Scan the QR code to download the KK Home App from the App Store or Google Play.
- The indicator turns on, indicating the device functions as a gateway and can supply power to other devices.
- The indicator turns off, switching the device to gateway-only mode.
- Press and hold the power button for 5 seconds:
- The indicator flashes, indicating the device is in pairing mode.
- Create an account for the App by following the provided instructions.
- Plug the G1 gateway into a socket and scan the QR code on the device using the App.
- Press and hold the power button for 5 seconds until the indicator flashes.
- Set up a Wi-Fi connection with a 2.4GHz network within 49ft (15 meters) of your home router.
- Refer to the App guide for adding a smart lock. Ensure the G1 gateway has been added successfully before adding the smart lock.
User Manual
- GATEWAY AND SMART PLUG G1

Tutorial Video
- Scan the QR code and search G1 to get the video.

LED Indicator Status
| Operation | Status |
| Plug in the power | The indicator turns on.
The device functions as a gateway and can also supply power to other devices. |
| Press the power button | The indicator turns off. The device now operates in gateway-only mode. |
| Press and hold the power button for 5 seconds | The indicator flashes. The device enters pairing mode. |
How to connect to G1 Gateway
Step 1: Download KK Home App
- Scan the QR code to download the KK Home App from the App Store or Google Play.

IMPORTANT
- Only compatible with KK Home App.
- Please add the G1 gateway in the KK Home App, and then add the smart lock.
Step 2: Create an account for the App.
- If you are an existing user: You can integrate this device into your KK Home App for easy control.
- If you are a new user: Please click the “Sign Up” button to create your account.

- Fill in your email ID
- Enter the verification code received in your email inbox
- Set up an account password
- Create an account successfully

Step3:Add the G1
- Plug the G1 gateway into the socket.

- Open the App and scan the QR code on the device.

IMPORTANT:
Keep the G1 gateway within 49ft (15 meters) of your home router - Press and hold the power button for 5 seconds until the indicator is flashing.

- Set up Wi-Fi connection; it only works with a 2.4GHz Wi-Fi network.

Step4: Add the smart lock in the App.
- Please refer to the App guide for the smart lock.
- Note: Before adding a smart lock in the App, please make sure the G1 gateway has been added successfully.
Technical parameters
- Maximum current: 10A
- Rated voltage: 100-240V
- Rated power: 2200W
- Input voltage: 100-240V
IMPORTANT:
Keep the G1 gateway within 32ft (10 meters) of the door lock
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
ISED Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
Troubleshooting
What should I do if the gateway fails to pair?
The gateway has been added successfully, but it can’t be controlled remotely. What should I do?
How many smart locks can one gateway support?
Documents / Resources
![]() | G1 |
References
- User Manualmanual.tools

