resistex FEBUS Spot Light
Product Information
Specifications
- Model: APE 2740Z
- Siret: 487 593 477 00010
- Company: FEBUS
- Dimensions: 140mm x 125mm / 220mm x 200mm
Product Usage Instructions
Safety Notes
- Never work when voltage is present on the luminaire.
- The installation must be performed by a professional installer following electrical installation standards and regulations.
- Risk of electrostatic discharges (ESD Norm), handle with precautions.
- Observe the notes and steps described in the mounting instructions.
Maintenance Instructions
- Do not use chemicals or abrasives products to clean the fixture.
- Keep these instructions for dismantling or future maintenance.
- Consult additional information about RESISTEX luminaires on www.resistex-sa.com.
- RESISTEX is not responsible for any misuse of the product.
Installation
Follow the installation instructions provided in the manual carefully. Ensure the dimensions match the space available for installation. Contact a professional installer if needed.
Installation Instructions
Safety notes
- Never work when voltage is present on the luminaire.
- The installation must be performed by a professional installer in compliance with the standards and regulations relating to electrical installations
- Risk of electrostatic discharges. (ESD Norm). Handle with precautions.
- Please observe the notes and steps described in the mounting instructions.
Maintenance instructions
- Do not use chemicals or abrasives products to clean the fixture.
- Keep these instructions for dismantling or future maintenance. You can consult additional information about RESISTEX luminaires on the website www.resistex-sa.com .
RESISTEX cannot be responsible for any misuse of the product.
DIAGRAM
INSTALLATION
RESISTEX EXPLOITATION, 11 Quai de la Banquière CS 80010, 06730 Saint-André-de-la-Roche – France
Tél. 04 93 276 276 – Fax 04 93 276 280 – contact@resistex-sa.com
APE 2740Z – Siret 487 593 477 00010 – SAS CAPITAL 649979 € – T.V.A. F.R. 73 487 593 477
FAQ
Can I clean the fixture with chemicals?
No, do not use chemicals or abrasives to clean the fixture. Refer to maintenance instructions for more details.
What should I do in case of electrostatic discharges?
Handle the product with precautions as per the ESD Norm guidelines mentioned in the safety notes.
Documents / Resources
 | FEBUS Spot Light |
 | FEBUS Spot Light |
References
- mailto:contact@resistex-sa.comresistex-sa.com
- sa.comsa.com
- Résistex - Solutions d'éclairage professionnelwww.resistex-sa.com
- Résistex - Solutions d'éclairage professionnelwww.resistex-sa.com
- User Manualmanual.tools
Published: September 1, 2025