Artemide M294010 Diffused Emission Structural Module Instructions

Artemide-logo

Artemide M294010 Diffused Emission Structural Module

Artemide-M294010-0Diffused-Emission-Structural-Module-product

Specifications

  • Product Name: Algoritmo System – Diffused Emission Structural module recessed – Trim 3552mm Black
  • Designers: Carlotta de Bevilacqua, Paola di Arianello
  • Model: Arianello
  • Dimensions: Length: 3550 mm
  • Accessories: End caps (set of 2) trim black M294010

Installation

  1. Ensure the installation area is suitable for a recessed structural module.
  2. Securely attach the end caps to both ends of the trim using the provided screws.
  3. Carefully position the module in the recessed area and connect it to the power source following the electrical guidelines.
  4. Test the module’s functionality before finalizing the installation.

Maintenance

To maintain the product’s appearance and functionality:

  • Clean the module’s surface with a soft, dry cloth to remove dust and debris.
  • Avoid using harsh chemicals or abrasive materials that may damage the module’s finish.
  • Regularly check the connections and power supply to ensure proper functioning.

Troubleshooting

If you encounter any issues with the module, such as flickering lights or power interruptions, consult the user manual for troubleshooting steps. If problems persist, contact customer support for assistance.

Algoritmo System – Diffused Emission – Structural module recessed – Trim 3552mm Black

DESCRIPTION

A modular system for ceiling or wall-recessed installation, to be installed as a continuous line or with angles, composed of structural modules in extruded aluminium, of pre-wired gear plates with through-wiring and a quick-connection system of optics systems and components for connecting, fixing, joining or finishing the system. The prewired LED plates were designed for diffused emission, wall washer light, prismoptic or controlled emission, for projector integration (PAD or Cube 37), and for 3-phase track alimentation. Complies with standard EN60598-1 and any other specific standard.

DIMENSIONS

  • Longueur : 3550 mm

Artemide-M294010-0Diffused-Emission-Structural-Module-fig- (1)

ACCESSOIRES

  • 90° angle. To mechanically connect two recessed modules on perpendicular planes. Black (trim) M293810Artemide-M294010-0Diffused-Emission-Structural-Module-fig- (2)
  • End caps (set of 2) trim black M294010Artemide-M294010-0Diffused-Emission-Structural-Module-fig- (3)
  • 90° joint. To mechanically connect two recessed modules on the same plane – Trim – Black (To be ordered with kit cover angle cod. AE44001 /AE44004) M293910Artemide-M294010-0Diffused-Emission-Structural-Module-fig- (4)

www.artemide.com

Frequently Asked Questions

Can the trim color be customized?

: The trim color provided is black, but custom trim colors may be available upon request. Please contact customer service for more information.

Is professional installation required?

It is recommended to seek professional assistance for the installation of the structural module to ensure proper setup and electrical connections.

Are replacement parts available?

Yes, replacement parts such as end caps or additional trim pieces can be purchased separately. Contact our customer service for assistance with ordering.

Documents / Resources

PDF thumbnailM294010 Diffused Emission Structural Module
Instructions · 4542910, M294010, M294010 Diffused Emission Structural Module, Diffused Emission Structural Module, Emission Structural Module, Structural Module, Module
PDF thumbnailM294010 Diffused Emission Structural Module
Owner's Manual · 4556018, M294010, M294010 Diffused Emission Structural Module, M294010, Diffused Emission Structural Module, Emission Structural Module, Structural Module, Module

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.