HTVRONT Hat Heat Press

Included in the Box
|
|
|
Machine Overview
Digital Screen- Buttons
- Heat Plate
- Big Hat Platen
- Small Hat Platen
- Handle
- Hat Stretcher
- Pressure Knob
- Power Cord
- Suction Cups
- Time: 1 ~ 999 s
- Temp: 60 – 240°C (140 – 464 ° F)
Details of Buttons
Power
After powering on, press the “Power” button to turn the machine on (left) or off (right).
Set
Press once: The temp value flashes, and adjust the temp with the”+” or”-” button;
Press twice: The time value flashes, and adjust the time with the”+” or”-” button.
Increase
Short press (once): Temp increases by 1 °F /1 °C; time increases by ls;
Long press (;;.2 s): The temp/time value increases until released.
Decrease
Short press (once): Temp decreases by 1 °F /1 °C; time decreases by ls;
Long press (;;.2 s): The temp/time value decreases until released.
Start
After heating, press the “Start” button once to begin the countdown and resume heating; During the countdown, press the “Start” button once to pause the countdown and heating.
Functions
- Memory Mode
- The set temperature and time will be remembered for the next operation;
- Temperature Unit Switch
Long press the”+” and “-” buttons simultaneously for 2 s to switch units.
*Note: “0-F” means Fahrenheit; press”+” or”-” again to switch to “1-C” for Celsius; - Overload Protection
The machine will shut down if the electric current exceeds the limit. Please replug it before using it again. - Auto Turn-off
This machine will turn off automatically if there’s no operation in 30 minutes; - Overtemperature Protection
If the heat plate’s temp exceeds 464 F /240°C, it will beep continuously. Please unplug the machine and let the heat plate cool down;

Instructions for Use
- Please lower the hat stretcher after placing the hat to ensure the target area is flat before ironing;
- Long press the”+” and”-” buttons simultaneously for 2 s to confirm the desired temp unit;
- Place the machine on a flat, smooth surface and secure the suction cups;
- Tighten the suction cup screws for strong suction and stability;
- Adjust the pressure knob to the appropriate pressure before use.
*Operate only when the machine is fully cooled.
- Suction Cup Installation Align the suction cups with the bottom hols and tighten with the screws.
Note: Tighter means stronger suction. - Adjust the Pressure
Adjust the pressure knob to the appropriate pressure before use. - Platen Replacement
Unscrew the screws connecting the platen to the bracket on the side by hand.

Instructions for Use
- Press down the hat stretcher with the power off and place the hat on the hat platen (pressing area up). Then, lift the hat stretcher to secure the hat;
- Place the material on the hat and fix it with heat-resistant tape. Cover the design with the Teflon sheet;

- Power on the machine and press the “Power” button to the left to turn on the machine;
- Press the “Set” button. When “TEMP” and “SET” flash on the screen, adjust the temp with “+” or “-.” Press the “Set” button again. When “SET” and “TIME” flash on the screen, adjust the time;

- Press the “Set” button or wait for the screen to flash three times to preheat;
- There’s a beep after preheating. Press the “Start” button or lower the handle to start the countdown and iron.

Specifications
| Materials | Textile | Temp | Time | Note |
| Pure Heat Transfer Vinyl | 100%Cotton,Polycotton,Polyester,etc. | 145’C/293’F | 15s | Cold Peel |
| Glitter Heat Transfer Vinyl | 100%Cotton,Polycotton,Polyester,etc. | 150’C/302’F | 15s | Cold Peel |
| Holographic Heat Transfer Vinyl | 100%Cotton,Polycotton,Polyester,etc. | 150’C/302’F | 15s | Cold Peel |
| Chameleon Heat Transfer Vinyl | 100%Cotton,Polycotton,Polyester,etc. | 145’C/293’F | 15s | Cold Peel |
| Metallic Heat Transfer Vinyl | 100%Cotton,Polycotton,Polyester,etc. | 140’C/284’F | 10s | Cold Peel |
| Printable HeatTransferVinyl | 100%Cotton,Polycotton,Polyester,etc. | 145’C/293’F | 15s | Cold Peel |
| Reflective HeatTransferVinyl | 100%Cotton,Polycotton,Polyester,etc. | 150’C/302’F | 15s | Cold Peel |
| Flock HeatTransferVinyl | 100%Cotton,Polycotton,Polyester,etc. | 150’C/302’F | 15s | Cold Peel |
| Puff Heat Transfer Vinyl | 100%Cotton,Polycotton,Polyester,etc. | lSS’C/311’F | 15s | Hot Peel |
| Heat Transfer Paper for Dark Fabric | 100%Cotton,Polycotton,Polyester,etc. | 160’C/320’F | 20s | Cold Peel |
| Heat Transfer Paper for Light Fabric | 100%Cotton,Polycotton,Polyester,etc. | 160’C/320’F | 20s | Cold Peel |
| Sublimation Paper | Polycotton,Polyester | 200’C/392’F | 40s | Hot Peel |
| DTF Transfer Film | 100%Cotton,Polycotton,Polyester,etc. | 150’C/302’F | 15s | Cold Peel |
| Product Name HTVRONT Manual Hat Heat Press | Model | HPMH0l | ||||
| Input Voltage ll0V~ 60Hz | Power Consumption | 500W | Temp | 60 – 230°C (140 -446°F) | ||
| Heat Plate Dimensions | 6.90 x 3.74in/17.50 x 9.50cm | Time | 1-999 s | |||
| Small Hat Platen Dimensions | 6.9 x 2.55in/l7.5 x 6.5cm | Big Hat Platen Dimensions | 7.0 x 3.3in/18.0 x 8.5cm | |||
| Product Size | 14.8 X 6.9 X ll.6in/ 37.6 x 17.5 x 29.6cm | Package Size | 16.9 X 7.3 X 13.0in/43.0 x 18.5 x 33.0cm | |||
| Product Weight | 7.4 kg/16.3 lb | Package Weight | 8.0 kg/17.6 lb | |||
Precautions
- Do not use this product outdoors. It’s only for household use;
- This product has to work on a stable, flat, and heat-resistant surface;
- Keep the product away from flammables while in use;
- When using this product, please keep an eye on it to avoid accidents. Turn off the product and unplug the power cord while leaving;
- Do not touch the heat plate after powering on to prevent burns;
- Do not let the power cord touch the heat plate during the operation;
- After use, please wait until the machine is completely cool before storing it away;
- Please unplug the power cord after use or before cleaning the product;
- Do not immerse the product in any liquid;
- When there are beeps, please cut the power immediately and restart. Feel free to contact us if you have more questions;
- If the product is malfunctioning or damaged, please stop using the product immediately and contact HTVRONT’s customer service;
- Children under 14 MUST have adult supervision while using the machine.
HTVRONT Manual Hat Heat Press Warranty
The warranty period of this machine is one year from the date of purchase. Other HTVRONT accessories are guaranteed for free within three months from the date of purchase. Warranty service is available when there’s a malfunction in normal use during the warranty period. If consumers need warranty service, they need to provide proof of purchase.
To the extent permitted by applicable laws, HTVRONT is not responsible for the warranty in the following situations: malfunctions caused by improper use, maintenance, and storage by consumers; malfunctions caused by self-repair or dismantling by those who do not undertake the three-guarantee repair without the permission of our company; products that can continue to be used after repair when the warranty expired; damage caused by force majeure. Meanwhile, HTVRONT disclaims all implied and legal warranties, including warranties of merchantability and fitness for a particular purpose.The warranties that are allowed to be denied are for the duration of this warranty. Proof of purchase may be required to verify warranty eligibility.
FAQs
How to achieve better ironing results?
How to ensure the pressure is appropriate?
What if the machine base lifts when pressing down the handle?
Why does the hat show creases after ironing?
Does the countdown start if I lower the handle without ironing the Start button?
Why does the countdown start during preheating?
Documents / Resources
![]() | Hat Heat Press |
References
- User Manualmanual.tools
