Mero Beacon Tracker Device Owner’s Manual

Mero-LOGO

Mero Beacon Tracker Device

Mero-Beacon-Tracker-Device-PRODUCT

Specifications

  • Item: Beacon1
  • Case Color: White (Other colors can be customized)
  • Battery Model: 1 x CR series, 230mAh, 3.0V DC
  • Operation Voltage: 1.8-3.6V
  • Transmission Current: 5.3mA (peak current)
  • Transmission Range: 60 meters
  • Sampling Interval: 900ms
  • Sampling Accuracy: +/- 2g
  • Antenna: 50ohm, On board / PCB Antenna
  • Size: 36.5*23.7*5mm

Product Usage Instructions

Activation

To activate the Beacon1 device, follow these steps:

  1. Take out the plastic battery sheet from Beacon1.
  2. The device is now activated and ready for use.

Firmware Upgrade

To upgrade the firmware of Beacon1, you will need:

  1. J-LINK Programmer Kit.
  2. Programming ports definition.

Please contact Mero sales team for more information on firmware upgrades.

Packing Information

The packing details for Beacon1 are as follows:

  • Inner Box: 80pcs/box, Net Weight: 520g, Gross Weight: 750g, Size: 30.5 x 11 x 7.2 cm.
  • Outer Box: 800pcs/carton, Net Weight: 5.2Kg, Gross Weight: 8Kg, Size: 32 x 23.5 x 40 cm.

Mero-Beacon-Tracker-Device-FIG-3

Beacon1 can be used for asset tracking, activity monitoring, inventory tracking, etc., in different industries.

FEATURE

  • Advertise iBeacon & Eddystone & Sensor data
  • Bluetooth® 5.0 chipset nRF52 series
  • Included 1pc CR series coin battery replaceable
  • The max.60 meters advertising distance
  • Compact housing with a key-chain hole

APPLICATION

  • Asset tracking
  • Activity monitoring
  • Inventory tracking

ACCESSORY

  • Double-sided adhesive

ACTIVATE E8S

  • Takeout the plastic battery sheet from Beacon 1 to activate device

FIRMWARE UPGRADE

  1. J-LINK Programmer Kit
  2. Programming ports definition

Please contact Mero sales team to ask more related information if needed.

Mero-Beacon-Tracker-Device-FIG-1

PACKING INFORMATION

Mero-Beacon-Tracker-Device-FIG-2

  • iBeacon MFi License (iBC-14-00582)
  • Bluetooth® EPL Certification
  • FCC Regulation
  • CE Regulations
  • IC Regulations

DECLARATION

The contents of this datasheet are subject to change without prior notice for further improvement. Mero team reserves the right to explain all the terms of this datashee

CONTACT
Phone: +1 855 714 6376 x2
Email: hello@mero.co

Address:
2-325 Front Street West, Toronto, Ontario, M5V 2Y1, Canada.
https://www.mero.co/
<END>

FCC warning

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

All Rights Reserved by Mero | www.mero.co

FAQ

Q: What are the main applications of Beacon1?
A: Beacon1 can be used for asset tracking, activity monitoring, and inventory tracking in various industries.

Q: How can I activate the Beacon1 device?
A: To activate the Beacon1 device, simply remove the plastic battery sheet from the device.

Q: What is the transmission range of Beacon1?
A: The transmission range of Beacon1 is 60 meters.

Documents / Resources

PDF thumbnailBeacon Tracker Device
Owner's Manual · MEROB1, 2A6KHMEROB1, Beacon Tracker Device, Beacon, Tracker Device, Device

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.