AVer CAM520 USB Camera User Guide

CAM520 USB Camera

aver
CAM520 USB Camera
Quick Start Guide

Package Contents

CAM520 unit

Power adapter
Power cord*

USB cable

Remote Control

cam

L-Mount

Tripod screw

Drilling paper

AAA Battery x2

mount

paper

Quick Guide

Warranty card

* The power cord will vary depending on the country where it is sold.

Overview 

sold

  1. IR Sensor
  2. Power Indicator
  3. RS232 Connection*
  4. USB port
  5. Power Jack
  6. Kensington Lock
  7. Screw hole for mounting

P/N: 300AV8U0D???

Hardware Installation

1. Connect camera to power outlet.

2. Connect camera to computer.  

3. Connect computer to monitor.

4. Secure the USB cable.

cable

5. Wall mount installation  

Making a Video Call

A computer is required to use this device.  

Step 1: Open your video collaboration application such as SkypeTM, Skype for Business, Google  HangoutsTM, ZoomTM, Bluejeans, WebExTM, Adobe ConnectTM, WebRTC  

Step 2: Set the CAM520 as your primary camera devices in your application (Please consult your  application setup guide for details.).  

Step 3: Ready to make a video call.  

Quick Reference  

Camera Preset (P) – The Preset button on the remote serves 2 functions.  

✔ To Save a Preset – Move camera to desired position. Press and HOLD the preset button until you receive the save message on the screen. Select 0 -9 to store the current camera position. Repeat if needed.  

✔ To load a Preset – TAP the preset button, select 0 – 9 to load a saved camera position. Repeat steps if needed.  

Pan/Tilt (O) – To move the camera, point the remote at the camera. Use the directional buttons to guide the camera to the desired position.  

IMPORTANT: DO NOTPHSYICALLY MOVE THE CAMERA BY HAND WHEN POWER IS APPLIED.  THIS WILL DAMAGE YOUR CAMREA.  

Remote Controller  

control

More Help  

The CAM520 is a Plug-n-Play USB camera. The system requires no special drivers, but we highly recommend installing the AVer PTZApp for the best user experience.  

Please visit http://www.aver.com/download-center for more information.  

For FAQs, technical support, software and user manual download, please visit: http://www.aver.com Contact Information

Headquarters  

AVer Information Inc.  

www.aver.com  

8F, No.157, Da-An Rd., Tucheng Dist., New Taipei City  

Taiwan  

AVer Information Europe B.V.  Westblaak 140, 3012KM, Rotterdam, Netherland  

Tel: +31(0)10 7600 550  

Technical support:  

EU.RMA@aver.com

Federal Communication Commission Interference Statement  

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference when the equipment is operating din a commercial environment. This equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.  

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.  

This device complies with part 15 of the FCC Rules.  

Operation is subject to the following two conditions:  

(1) This device may not cause harmful interference, and  

(2) this device must accept any interference received, including interference that may cause undesired operation.  

Warning: This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.  

CAUTION

– Risk of explosion if battery is replaced by an incorrect type.  

– Dispose of used batteries in a safe and proper manner.

Remote Control Battery Safety Information  

– Store batteries in any cool & dry place.  

– Do not dispose used batteries in domestic waste. Dispose batteries at special collection points or return to stores if applies.  

– Remove the batteries if they are not in use for long period of time. Battery leakage and corrosion can damage the remote control, dispose batteries safely.  

– Do not mix and use old and new batteries.  

– Do not mix and use different types of batteries: alkaline, standard (carbon -zinc) or rechargeable (nickel-cadmium).  

– Do not dispose batteries in a fire.

– Do not attempt to short circuit the battery terminals. –  

©2019 AVer Information Inc. All rights reserved.  

Documents / Resources

PDF thumbnailCAM520 USB Camera
User Guide · CAM520, CAM520 USB Camera, CAM520, USB Camera, Camera

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.