SHENZHEN DC080 Digital Camera User Manual

Digital Camera

User Manual

Please read the manual carefully before use.

WARNING

To reduce the risk of fire, electric shock, or injury.

  1. Do not expose the unit to rain or moisture.
  2. Do not place objects filled with liquids, such as vases, on the apparatus.
  3. Do not expose the batteries o excessive heat, such as sunshine or fire.
  4. Do not ingest batteries; this is a chemical burn hazard. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
  5. If you think batteries have been swallowed or placed inside any part of the body, seek immediate medical attention.
CAUTION

To prevent battery-related hazards.

  1. Do not disassemble, crush, or expose the battery pack to shock or force such as hammering, dropping, or stepping on it.
  2. Do not short circuit or allow metal objects to contact the battery terminals.
  3. Do not expose to temperatures above 60°C (140°F), such as in direct sunlight or a car parked in the sun.
  4. Do not incinerate or dispose of in fire.
  5. Do not handle damaged or leaking lithium-ion batteries. Keep the battery pack out of reach of small children and keep it dry.
  6. Replace the battery with the specified type only. Otherwise, bursting, fire, or injury may result. 
1. Parts and controls

Rear view

SHENZHEN DC080 Digital Camera - a1

Front view

SHENZHEN DC080 Digital Camera - a2

  1. Charging/working indicator light
  2. Digital zoom in
  3. Digital zoom out
  4. Playback button
  5. Delete button
  6. Up / Flash shortcut button
  7. Right button
  8. OK button
  9. Down button
  10. Left button
  11. DISP button
  12. Menu button
  13. Display screen
  14. Flashlight
  15. Lens

Top view

SHENZHEN DC080 Digital Camera - a3

Bottom view

SHENZHEN DC080 Digital Camera - a4

  1. POWER button
  2. Photo/Video button
  3. Mode Dial
  4. Tripod hole

Left view                    Right view

SHENZHEN DC080 Digital Camera - a5        SHENZHEN DC080 Digital Camera - a6

  1. Memory card slot
  2. Type-C USB interface
  3. Battery compartment
Button/Indicators Functions
POWER Power on / off
In video mode, pause / start recording
PHOTO Take photo
Start / stop recording
Mode dial Switch shooting modes
T Zoom in digitally / Increase volume during video playback 
W Zoom out digitally / Decrease volume during video playback 
Indicator light Working / Charging indicator light
Playback button Open / Exit Media Playback
Delete Delete photo/video
Up Upward
Flash shortcut key
Right Rightward
Down Downward
Left Leftward
OK Confirm
DISP  First press: tum off screen icon display
Second press: close the display screen
Third press: open the display screen and tum on screen icon display
MENU Open / Close menu settings
USB USB cable charging
Connect the computer with USB cable
2. Using the Camera

2.1 Installing the battery and memory card

Follow the instructions for battery installation; do not attempt to open the battery, as improper installation may cause damage.

1. Open the battery compartment cover in the direction of the arrow.

SHENZHEN DC080 Digital Camera - a7

2. Insert the battery in the direction shown until you hear a “click.”

SHENZHEN DC080 Digital Camera - a8

3. Close the battery compartment cover in the direction of the arrow.

SHENZHEN DC080 Digital Camera - a9

4. Slide the latch in the direction of the arrow to eject the battery.

SHENZHEN DC080 Digital Camera - a10

Please format the storage card before use.
Do not insert the storage card while the device is powered on, as this may damage the card or result in data loss. For optimal performance, it is recommended to use a Class 10 or higher speed storage card.
Please insert the memory card according to the following steps:

  1. Insert the memory card in the shown until you hear a “click”.
  2. Press the memory card to eject it and then remove it.

(Memory card is installed in the machine)

SHENZHEN DC080 Digital Camera - a11

2.2 Charging the battery

You can use the supplied USB cable to charge your camera via an adapter (5V/1A-5V/2A).

SHENZHEN DC080 Digital Camera - a12

* The charging indicator will turn red when the battery is charging.
* The charging indicator will turn off automatically when the battery is fully charged.

2.3 Turn On/Off the Camera

Press and hold the power button for 3 seconds to turn the camera on/off.

SHENZHEN DC080 Digital Camera - a13

  1. POWER BUTTON
2.4 Auto Focus function

This product supports three focus modes, which can be set in the “Focus Mode” under system settings:

  1. Fixed Focus Mode: Supports shooting from 1 meter to infinity. Simply press the shutter button fully to take a photo.
  2. Semi-Automatic Mode: Supports shooting from 10 cm to infinity. Press the shutter halfway; when the focus frame turns green, the focus is set. Continue pressing to capture a clear photo.
  3. Full Automatic Mode: Supports shooting from 10 cm to infinity. The camera automatically focuses on the subject. Once the focus is clear on the screen, fully press the shutter to take a clear photo. (You can also manually focus by half-pressing the shutter button as needed.)
2.5 Connect to Computer
  1. Turn on the camera and connect the camera’s Type-C USB port to the USB port of the computer using the provided USB cable. The screen will display the available options.SHENZHEN DC080 Digital Camera - a14
  2. Press the Up/Down button to select the desired option, then press the OK button to confirm the option.

Charging Mode
Select the charging mode. The camera supports recording while charging. The camera will be fully charged faster if it remains powered off.

Mass Storage Mode
Select “Mass Storage Mode” and the computer will display the camera’s memory card drive. You can transfer files from the storage to the computer.

PC Camera
Select the “PC Camera” mode. The camera can be used as a webcam for live streaming, etc.
Note: When the camera is used as a webcam, only the digital zoom button can be operated on the camera; other functions cannot be used.

2.6 Shooting Interface

The meanings of the icons on the shooting interface are as follows:

  1. Photo Mode
  2. Photo Resolution
  3. Image Quality
  4. Flash
  5. Number of Photos Taken
  6. Remaining Number of Photos
  7. Storage Card Status
  8. Battery Level
  9. Video Mode
  10. Video Resolution
  11. Video Sound
  12. Remaining Video Time
  13. White Balance
  14. Filter
  15. Exposure
  16. Metering Mode
  17. ISO
  18. Current Time
  19. Current Date
  20. Zoom Indicator

SHENZHEN DC080 Digital Camera - a15

2.7 Shooting Mode

Rotate the mode dial to select the desired mode.

icon Mode Illustrate
SHENZHEN DC080 Digital Camera - a16 Photo Take a single photo normally.
SHENZHEN DC080 Digital Camera - a17 Auto Automatically take photos at specified intervals.
Optional 3s/10s/15s/20s/30s.
SHENZHEN DC080 Digital Camera - a18 Timer Take a single photo after a specified number of seconds. Optional 2s/5s/10s/15s/30s
SHENZHEN DC080 Digital Camera - a19 Burst Take a specified number of photos in quick succession. Optional 3P/s, SP/s
SHENZHEN DC080 Digital Camera - a20 Video Normal recording mode.
SHENZHEN DC080 Digital Camera - a21 Slowly Slow motion recording. Optional 1080P 2X / 720p 4x.
SHENZHEN DC080 Digital Camera - a22 Lapse Time-lapse recording. Interval optional 0.5s/1s/2s/5s/10s/30s/60s
SHENZHEN DC080 Digital Camera - a23 Loop Continuous recording in an infinite loop. Video Length optional 1min/2min/3min/5min/10min 
SHENZHEN DC080 Digital Camera - a24 Video+Photo Capture single photos at set intervals while recording video. Capture interval time optional 5s/10s/30s/60s
2.8 Function settings
  • Press the menu button in different shooting modes to enter the corresponding mode menu.
  • Use the up/down buttons to select the desired function, then press the OK button to enter the submenu.
  • Use the direction buttons to select the desired parameter.
  • Press the OK button to confirm and automatically return to the mode menu.
  • Press the menu button to exit the mode menu and return to the shooting interface.

For example, to set the video resolution:
In standard video recording mode, press the menu button to enter the standard video settings menu. Use the up/down buttons to select the “Rec Resolution” function. Press the OK button to enter the submenu.

SHENZHEN DC080 Digital Camera - a25 SHENZHEN DC080 Digital Camera - a26

2. Use the direction buttons to select “4K30FPS,” then press the OK button to confirm and automatically return to the mode menu.

SHENZHEN DC080 Digital Camera - a27 SHENZHEN DC080 Digital Camera - a28

3. Press the menu button to exit the mode menu and return to the video recording interface.

2.9 System setup
  • Pressing the menu button in different shooting modes allows you to enter the corresponding mode menu.
  • Use the left/right buttons to select system settings, and use the up/down buttons to choose the desired function.
  • Press the OK button to enter the submenu, then use the left/right buttons 10 select the desired parameter.
  • Press the OK button to confirm and automatically return to the settings menu. Press the menu button to exit system settings and return to the shooting interface.

For example, to format the memory card:
1. In video or photo mode, press the menu button to enter the corresponding mode menu. Use the left/right buttons to select the system settings.

SHENZHEN DC080 Digital Camera - a29 SHENZHEN DC080 Digital Camera - a30

2. Use the up/down buttons to select the “Format” function, then press the OK button to enter the submenu. Use the left/right buttons to select “Format”.

SHENZHEN DC080 Digital Camera - a31 SHENZHEN DC080 Digital Camera - a32

3. Press the OK button to confirm. Once the formatting is complete, it will automatically return to the settings menu. Press the menu button to exit the system settings and return to the shooting interface.

2.10 Playback and Delete
  1. In shooting mode, press the playback button to open the media library. Use the left/right buttons to select videos or photos.
  2. Press the OK button to enter the 8-thumbnail preview screen. Use the direction buttons to move the cursor to select a file, press the delete button to delete the file, press the OK button to view the file, and use the left/right buttons to turn the page. Press the MENU button to view file information.
  3. In the 8-thumbnail screen, press the MENU button to open the multi-select delete menu. Use the direction buttons to select files, press the OK button to confirm, and press the delete button to delete the selected files.
  4. When viewing photos, press the T button to enter zoom mode. Press the T/W buttons to zoom in/out, use the arrow keys to move the view, and press the playback button to exit.
  5. When viewing videos, press the OK button to start/pause playback, use the T/W buttons to adjust the volume, and press the playback button to exit.
3. Technical specifications

Image Resolution JPG: 75M, 64M, 56M, 48M, 30M, 24M, 20M, 12M, 8M, 5M, 3M
Video Resolution MP4: 5K(15FPS), 4K(30FPS), 2.7K(60/30FPS), FHD (60/30FPS), HD(120/60/30FPS) 
LCD Display 3.0″ IPS HD 180° flip-up screen
External Memory Micro SD card (up to 128 GB), above Class 10
Photo Flash < 1 meter; ON / AUTO / OFF
Video Flash <1 meter; ON / OFF
ISO Auto/100/200/400/800/1600/3200/6400
Exposure EV -3 ~ EV +3
Light Source Frequency Auto/50Hz/60Hz
4. Frequently Asked Question Guide

Trouble  Measures
Unable to charge If the charging indicator is not on, the charger is not plugged in. Please check whether the charger is connected normally. Or replace with a new charging cable and charger.
If the ambient temperature is below 10°C, charging may be slow or not possible. 
Unable to connect to PC Please check whether the USB data cable is connected correctly.
Please check whether the USB interface of computer is working properly.
Please try changing the data cable or computer device.
Blurred shooting effect The camera supports AF function. Please focus clearly before shooting.
If the picture is shaking, you can use it with triangle as needed.
Storage Card Not Recognized Format the storage card.
Check if the storage card is inserted correctly.
Try using a new storage card.
Camera Won’t Turn On Insufficient battery power. Please replace the battery or charge it.
The battery is installed incorrectly. Please ensure the battery is installed correctly.

We strive for 100% customer satisfaction as our consistent service principle. If you encounter any problems, please feel free to contact our after-sales team for a satisfactory solution.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

MV-DC080-V1.0

Documents / Resources

PDF thumbnailDC080 Digital Camera
User Manual · 2A6Q7-DC080, 2A6Q7DC080, dc080, DC080 Digital Camera, DC080, Digital Camera, Camera

References

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Browse all questions about this manual

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. MV-DC080-V1.0を購入しました。写真に撮影日を表示させるには、どのようにすればいいのでしょうか?ご教授よろしくお願いいたします。

    神谷康司 asks MV-DC080-V1.0を購入しました。写真に撮影日を表示させるには、どのようにすればいいのでしょうか?ご教授よろしくお願いいたします。
    Manuals+ clarified question
    Question

    How do I display the shooting date on photos for the SHENZHEN DC080 digital camera?

    Answer

    To display the date on your photos with the SHENZHEN DC080, you need to configure the Date Stamp (or Date Set) settings within the camera's menu. Based on the manual, follow these steps:

    • Enter Menu: While in photo mode, press the MENU button to open the settings.
    • Navigate to System Setup: Use the Left/Right buttons to switch from the shooting settings to the System Setup (indicated by a gear icon).
    • Select Date Set: Use the Up/Down buttons to find the Date Set option and press OK to enter.
    • Configure Date: Set the current date and time. Ensure that the date display option is enabled so it appears on the shooting interface and is burned into the image file.
    • Check Shooting Interface: Once set, you should see the current date (item 19 in the manual's interface guide) on the screen while taking photos.

    Note: If the date is visible on the screen but not appearing on the final saved photo, look for a specific Date Stamp toggle within the Photo Mode menu settings and ensure it is set to "On".

  2. 本日購入したものですが、充電しても充電ランプがつかないのですが不良品ですか?

    坂本 asks 本日購入したものですが、充電しても充電ランプがつかないのですが不良品ですか?
    Manuals+ clarified question
    Question

    Why is the charging indicator light not turning on when I charge the camera?

    Answer

    According to the Frequently Asked Question Guide in the manual, if the charging indicator is not on, please check the following:

    • Connection: Ensure the charger is plugged in and connected normally to the camera's Type-C USB interface.
    • Hardware: Try replacing the charging cable or the adapter (the camera supports 5V/1A - 5V/2A adapters).
    • Temperature: If the ambient temperature is below 10°C (50°F), charging may be slow or not possible.
    • Battery Installation: Ensure the battery is installed correctly in the compartment until you hear a "click."

    Note that the charging indicator should turn red when the battery is charging and will turn off automatically once the battery is fully charged.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.