Polymaster Chemical Compatibility Chart User Guide

Chemical Compatibility Chart

Specifications

This product is a Chemical Tank designed for various
applications involving different chemicals. It is made from
High-Density Polyethylene (HDPE) material, with options for
standard HDPE 7060 and higher-resistance HDPE 7065 for more
aggressive chemical use.

Product Usage Instructions

1. Chemical Compatibility Chart

Refer to the Chemical Compatibility Chart provided in the manual
to determine the compatibility of the tank material with different
chemicals based on their concentration or saturation levels.

2. Installation

Follow the installation instructions provided in the manual to
set up the Chemical Tank correctly. Ensure proper ventilation and
safety measures are in place during installation.

3. Operation

Fill the tank with the intended chemical within the recommended
concentration/saturation levels. Monitor the tank regularly for any
signs of leakage or damage. Use appropriate equipment for
transferring chemicals in and out of the tank.

4. Maintenance

Regularly inspect the tank for any wear and tear. Clean the tank
as per the guidelines provided to prevent chemical buildup or
contamination. Follow any specific maintenance instructions
mentioned in the manual.

FAQ

Q: What is the difference between HDPE 7060 and Chemical Grade
HDPE 7065?

A: Chemical Grade HDPE 7065 is a higher-resistance material
specifically suited for applications involving more aggressive
chemicals compared to standard HDPE 7060.

Q: Can I store any type of chemical in the tank?

A: No, it is essential to refer to the Chemical Compatibility
Chart and ensure that the chemical you intend to store is
compatible with the tank material to avoid any damage or
hazards.

Q: How often should I clean the tank?

A: The cleaning frequency depends on the type of chemical stored
and usage pattern. It is recommended to clean the tank regularly as
per the maintenance guidelines to maintain its efficiency and
longevity.

Loading PDF…
Download PDF

Installation, Operation & Maintenance Manual
CChheemmicicaal lTTaannkk CUCoonmdmpeartpgibrilaoityutCnibhdariRtliatinywCatehr art
and Septic Tanks

Chemical Compatibility Chart
This Chemical Compatibility Chart provides a comparison of the chemical resistance of our specialty grades of High-Density Polyethylene (HDPE) and Polypropylene polymers in different chemical environments. These specialty polymers were formulated to a wide range of chemicals, including aqueous and oxygenated solvents selected from Standard Reagents List. In addition, some Petroleum based fuel like Diesel and Kerosene, mineral oils, and PFAS were also selected. The concept was to cover the broadest range of chemical environments considered most likely to be encountered in applications using our range of polymers.
About Our Test Methods
Material samples were tested in accordance with Environmental Stress-Cracking Resistance (ESCR) – ASTM D1693 and Actual Long-Term Storage Testings. ESCR is the formation of cracks in a material caused by low tensile stress and environmental conditions. The samples are tested by slowly bending the specimens and placing them in a holding clamp. The clamp and specimens are then placed in a test tube and immersed in 100% Igepal. The specimens on multiple test tubes are then sealed and placed in a constant-temperature bath of Triethylene Glycol. These specimens are inspected periodically for signs of cracks and failures. Following these test procedures, the specimens are removed from the chemicals and their physical properties are tested for dimensional changes.
Guidance to the Chemical Resistance and Chemical Database
Some chemicals on our Chemical Compatibility Chart are derived from information sources and available database of our selected raw material suppliers. The information from these third-party sources are believed to be reliable. The information relating to chemical resistance is intended to serve as a general guide. The information listed herein does not consider all variables that can be encountered in actual use. Thus, the intent of the information is to provide guidance for consideration and investigation and shall not be construed as a warranty or representation for which Polymaster Pty Ltd assumes legal liability. It is highly advisable for the customer to determine whether our product is suitable for all variables and or intended use.
2 polymaster.com.au

Chemical Compatibility Chart
Note: “Chemical Grade” HDPE 7065 refers to a higher-resistance HDPE, specifically suited for applications involving more aggressive chemicals.

Chemical Name

% Concentration /
% Saturation

Formula

TANK MATERIAL

HDPE 7060

Chemical Grade HDPE 7065

Adblue

0-100

DEF

ü

ü

Acetic Acid

0-100

CH COOH (C H O )

3

242

ü

ü

Alum (Potassium Alum Sulphate)

0-100

KAl(SO )2· H O 4 12 2

ü

ü

Aluminium Chloride Hydroxide (ACH)

0-100

AlCl H O 22

ü

ü

Aluminium Polychloride (Polyaluminium Chloride)

0-100

(PAC) [Al (OH)nCl -n]m

2

6

ü

ü

Ammonium Chloride

0-100

NH Cl 4

û

ü

Ammonium Nitrate Solution

0-100

NH NO 43

û

ü

Ammonia

0-100

NH OH 4

û

ü

Boric Acid (Boracic Acid)

0-100

BH O 33

ü

ü

Calcium Bromide

0-50

CaBr 2

ü

ü

Calcium Chloride

0-40

CaCl 2

ü

ü

Calcium Hydroxide

0-5

Ca(OH) 2

ü

ü

Calcium Nitrate

0-50

Ca(NO ) 32

ü

ü

Canola Oil (Rapeseed Oil)

0-100

NA

ü

ü

Carbamide (Urea)

0-100

CH N O 42

ü

ü

Caustic Soda (Sodium

0-100

NaOH

ü

ü

Hydroxide/ Lye)

Freecall 1300 062 064

3

Chemical Compatibility Chart
Note: “Chemical Grade” HDPE 7065 refers to a higher-resistance HDPE, specifically suited for applications involving more aggressive chemicals.

Chemical Name

% Concentration /
% Saturation

Formula

TANK MATERIAL

HDPE 7060

Chemical Grade HDPE 7065

Citric Acid

0-100

CHO 687

ü

ü

Chromic Acid

0-50

H CrO

2

4

ü

ü

Copper Sulphate

0-18

CuSO 4

ü

ü

Cumene (Isoprophyl Benzene)

0-100

CH 9 12

û

û

Diesel

0-100

varies

ü

ü

Diethylene Glycol

0-100

CH O 4 10 3

ü

ü

Epsom Salt (Magnesium Sulphate)

0-100

MgSO 4

û

ü

Ethanol

0-100

CHO 26

û

û

Ethylene Glycol

0-100

CHO 262

ü

ü

Ethylene Oxide

0-100

CHO 24

ü

ü

Ferric Chloride

0-50

FECl 3

ü

ü

Ferric Sulphate

0-50

Fe (SO ) 2 43

ü

ü

Ferrous Chloride

0-50

FeCl 2

ü

ü

Fluosilicic Acid

0-100

F H Si 62

ü

ü

Formaldehyde

0-100

CH O 2

ü

ü

Formic Acid (Methanoic Acid)

0-100

CH O 22

ü

ü

Glucose

0-100

CH O 6 12 6

ü

ü

4 polymaster.com.au

Chemical Compatibility Chart
Note: “Chemical Grade” HDPE 7065 refers to a higher-resistance HDPE, specifically suited for applications involving more aggressive chemicals.

Chemical Name

% Concentration /
% Saturation

Formula

TANK MATERIAL

HDPE 7060

Chemical Grade HDPE 7065

Glycerine

0-100

CHO 383

ü

ü

Hydrochloric Acid (Muriatic Acid)

0-100

HCl(aq)

ü

ü

Hydrogen Peroxide

0-100

HO 22

ü

ü

Isobutyl Alcohol

0-100

CH O 4 10

ü

ü

Isopropyl Alcohol

0-100

CHO 38

ü

ü

Isoprophyl Benzene (Cumene)

0-100

CH 9 12

û

û

Kerosene

0-100

varies

û

û

Liquid Detergent

0-100

varies

ü

ü

Lye (Sodium Hydroxide/ Caustic Soda)

0-100

NaOH

ü

ü

Magnesium Hydroxide

0-50

Mg(OH) 2

ü

ü

Magnesium Sulphate (Epsom Salt)

0-100

MgSO 4

û

ü

Methanoic Acid (Formic Acid)

0-100

CH O 22

ü

ü

Muriatic Acid (Hydrochloric Acid)

0-100

HCl(aq)

ü

ü

Nitric Acid

0-100

HNO 3

û

ü

Oleic Acid

0-100

CHO 18 34 2

ü

ü

Olive Oil

0-100

varies

ü

ü

Oxalic Acid

0-100

CHO 224

ü

ü

Freecall 1300 062 064

5

Chemical Compatibility Chart
Note: “Chemical Grade” HDPE 7065 refers to a higher-resistance HDPE, specifically suited for applications involving more aggressive chemicals.

Chemical Name

% Concentration /
% Saturation

Formula

TANK MATERIAL

HDPE 7060

Chemical

Grade HDPE 7065

Phosphoric Acid

0-100

H PO 34

ü

ü

Potassium Alum Sulphate (Alum)

0-100

KAl(SO ) · H O 4 2 12 2

ü

ü

Potassium Nitrate

0-24

KNO 3

ü

ü

Potassium Permanganate

0-20

KMnO 4

û

ü

Potassium Sulphate

0-20

K SO 24

ü

ü

Polyaluminium Chloride (PAC)

0-100

AlnCl( n-m)(OH)m 3

ü

ü

Propylene Glycol

0-100

CHO 382

ü

ü

Rapeseed Oil (Canola Oil)

0-100

NA

ü

ü

Salt (Sodium Chloride)

0-25

NaCl

ü

ü

Smithsonite (Zinc Carbonate)

0-100

ZnCO 3

ü

ü

Soda Ash (Sodium

0-25

Carbonate)

Na CO 23

ü

ü

Sodium Bisulphate (Sodium

0-50

Hydrogen Sulphate)

NaHSO 4

ü

ü

Sodium Bromide

0-40

NaBr

ü

ü

Sodium Carbonate (Soda

0-25

Ash)

Na CO 23

ü

ü

Sodium Chloride (Salt)

0-25

NaCl

ü

ü

Sodium Chlorite

0-40

NaClO 2

û

ü

Sodium Hydrogen Sulphate

0-50

(Sodium Bisulphate)

NaHSO 4

ü

ü

6 polymaster.com.au

Chemical Compatibility Chart
Note: “Chemical Grade” HDPE 7065 refers to a higher-resistance HDPE, specifically suited for applications involving more aggressive chemicals.

Chemical Name

% Concentration /
% Saturation

Formula

TANK MATERIAL

HDPE 7060

Chemical

Grade HDPE 7065

Sodium Hypochlorite Sodium Metasilicate
(Sodium Silicate) Sodium Metabisulfite
Sodium Nitrate Sodium Nitrite Sodium Persulphate Sodium Silicate (Sodium Metasilicate) Sulphuric Acid Sulphuric Acid Sulphuric Acid Urea (Carbamide) Water (Pure) Zinc Bromide Zinc Carbonate (Smithsonite) Zinc Chloride
Zinc Oxide Zinc Sulphate

0-20 0-60 0-100 0-45 0-40 0-22 0-60 0-30 30-75 75-98 0-100 0-100 0-50 0-100 0-65 0-50 0-20

NaOCl Na SiO
23
Na S O 22 5
NaNO 3
NaNO 2
Na S O 22 8
Na SiO 23 H SO 24 H SO 24 H SO 24
CH N O 42 HO 2 ZnBr 2
ZnCO 3
ZnCl 2
ZnO ZnSO
4

û

ü

ü

ü

ü

ü

ü

ü

ü

ü

ü

ü

ü

ü

ü

ü

û

ü

û

ü

ü

ü

ü

ü

ü

ü

ü

ü

ü

ü

ü

ü

ü

ü

Freecall 1300 062 064

7

Together we hold the future.
PUB-2024-10

1800 062 064 polymaster.com.au
Follow us: Polymaster Group

Documents / Resources

PDF thumbnailChemical Compatibility Chart
User Guide · 000L Process Tank, Chemical Compatibility Chart, Compatibility Chart, Chart

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.