LightMap AIR Station User Manual

Introduction
Thank you for purchasing the LightMap AIR Station!
This manual will guide you through the setup, and operation of your new AIR Station. If you have any questions or need further assistance, feel free to reach out by email using info@lightmaps.io.
What’s in the Box
- LightMap AIR Station
- Power Cord
- Quick Start Guide
Setup Instructions
Power Up
- Connect the LightMap AIR Station to the included 24V power adapter using the circular connector.
- Plug the power adapter into a standard wall outlet.
Get Connected
- Upon powering up, the AIR Station will alternate between green and blue lights.
- When the lights turn blue, use a mobile device or PC to connect to the ‘LightMap’ WiFi network.
- Once connected, a window will appear prompting you to enter your local WiFi name (SSID) and password.
- The AIR Station will switch from blue to green and attempt to connect to your network.
- To make changes to your setup, unplug and replug the power adapter. The lights will turn blue again, allowing you to reconnect using a mobile device or PC.
For more details or technical support, please visit our website: www.lightmaps.io/FAQ.
Using Your AIR Station
Once your AIR Station is connected to your local WiFi network, it will begin displaying realtime weather conditions relevant to your airport selection. The following data points are available for you to monitor:
- Live METAR Conditions
- Wind Direction
- Wind Speed & Gust Speed
- Live Weather Conditions
- Cloud Cover
- Visibility
- Barometric Pressure
- Temperature & Dew Point
Flight Category LED
The Flight Category LED is displayed directly under the airport code on the AIR Station and provides a quick, visual indication of the most recent METAR (Meteorological Aerodrome Report) for the selected airport. METAR reports describe current weather conditions at the airport, including visibility, wind, cloud cover, and other key elements affecting flight safety.
Understanding the Flight Category LED
- Green: VFR (Visual Flight Rules) – Weather conditions are clear and favorable for visual navigation.
- Blue: Marginal VFR – Weather conditions are still acceptable for VFR flight but may require extra caution.
- Red: IFR (Instrument Flight Rules) – Weather conditions are poor, and instrument navigation is required for safe flight.
- Purple: Low IFR – Severe weather conditions that may severely limit visibility and cloud clearance, requiring IFR flight with special attention.
- White: Data is stale (greater than 60 minutes since the last report).
- Flashing Orange: Primary ICAO has not reported in 2 hours, and a secondary ICAO is configured in the menu.
- Pulsing Orange: Color will pulse ORANGE if a there is a short term TFR in the area
Wind Direction
By default, the AIR Station shows wind direction in the format similar to a wind sock, indicating where the wind is going to (e.g., a wind from the north would be displayed as 180°). However, if you prefer to see wind direction in the conventional format (where the direction is based on where the wind is coming from), you can easily switch the display mode. To do so, follow these steps:
- Unplug the AIR Station and plug it back in. The device will restart.
- Navigate to the settings page where you configured your WiFi.
- There is a section on this page that allows you to select the wind convention.
- Scroll to the bottom of the captive portal and select Submit.
- The wind direction will now be shown in the desired format.
Additional Details
- Color: Always ORANGE.
- Center Dot: Lit up when wind is less than 1 knot or when wind is VRB (variable).
- Directional Increments:
- 45° increments are shown as individual directions.
- 22.5° increments are shown as two directions simultaneously.
- Wind can be either “coming from” or “going to” using the “windsock mode” which if checked displays the wind “going to”
Example: Windsock mode enabled and wind is “going to” 157.5°. Both the N light and NW light will be illuminated ORANGE.
Wind Speed & Gust Speed
The Wind Speed & Gust Speed features display real-time wind speeds, including peak gusts.
Understanding the Display
- Bar Graph: Lights represent wind speeds and gusts below the indicated number.
- Wind Speed: Displayed in WHITE.
- Gust Speed: Displayed in ORANGE.
- Gust is only displayed if reported in the METAR.
- Gust is shown as dots above the wind speed.
Example
- Wind is 15 knots, and gust is 25 knots.
- Lights at 0, 5, 10, and 15 are WHITE.
- Lights at 20 and 25 are ORANGE.
Live Weather Conditions
The Live Weather Conditions feature provides up-to-date information on the current weather at your selected airport. This includes key data such as cloud cover, precipitation, temperature, and other relevant weather details to help you make informed decisions during flight planning.
Icons and Conditions
- SUN Icon: Lit YELLOW if cloud cover is either FEW or SCT.
- SNOW Icon: Lit WHITE if snowy conditions are in WX_STRING.
- RAIN Icon: Lit BLUE if rainy conditions are in WX_STRING.
- FOG Icon: Lit WHITE if foggy conditions are in WX_STRING.
- ALERT Icon: Lit ORANGE if abnormal conditions are in WX_STRING, including:
- Dust Storm
- Funnel Clouds
- Dust/Sand Whirls
- Squall
- Sandstorm
- ALERT Icon: Lit BLUE if the airport is within the bounds of a SIGMET.
- ALERT Icon (RED): Lit RED if the airport is within the bounds of an NWS Warning.
Visibility
- Visibility is shown as a bar graph indicating the visibility in miles.
Example
- Visibility is 4 miles:
- The lights at positions <1/2, 1/2, 1, 2, 3, and 4 miles will be illuminated.
Barometric Pressure
- Barometric pressure is displayed in tenth increments from 29.5-30.4 inHg.
Color Indicators:
- Red: Barometric pressure is low (29.5-29.7 inHg).
- Blue: Barometric pressure is normal (29.8-30.1 inHg).
- Green: Barometric pressure is high (30.2-30.4 inHg).
In the case that pressure is higher or lower than the specified range, the light will pulse to indicate extraordinary pressure.
Temperature & Dew Point
- Temperature and Dew Point are displayed by splitting the 10’s portion and 1’s portion into different rows.
Color Indicators:
- Positive Temperature:
- Temperature is displayed using white lights.
- Dew Point is displayed using blue lights.
- Negative Temperature:
- Temperature is displayed using red lights.
- Dew Point is displayed using purple lights.
Example:
- Temperature is 54°F and Dew Point is 35°F:
- The 50 light will be illuminated in WHITE.
- The 4 light will be illuminated in WHITE.
- The 30 light will be illuminated in BLUE.
- The 5 light will be illuminated in BLUE.
Additional Features & Maintenance
- Firmware Updates: Your AIR Station will be automatically updated via WiFi to ensure you always have the latest features and improvements. To receive firmware updates, keep your device connected to the internet.
- Cleaning Instructions: Use a soft, lint-free cloth to clean the device. If needed, lightly dampen the cloth with water or a gentle cleaner. Avoid using harsh chemicals or abrasive materials to prevent damage.
- Storage Instructions: When not in use for extended periods, unplug the AIR Station and store it in a dry, cool location. Ensure the device is not exposed to extreme temperatures or moisture.
If you have any questions or concerns contact LightMaps by emailing info@lightmaps.io
Documents / Resources
![]() | AIR Station |
References
- lightmaps.io/FAQwww.lightmaps.io
- User Manualmanual.tools
