CRYSTAL QUEST CQE-PS Float Switch

Wiring
Up Float Switch Wiring Guide
This guide provides instructions for wiring an up-float switch used in water filtration systems. The diagram illustrates the connections required for proper installation.
Wiring Diagram
- On/Off Switch: Connect the wires as shown to enable the switch functionality.
- To Power Cord: Ensure the power cord is connected securely to provide power to the system.
- To Float Switch: Connect the float switch wires to control the water level in the system.

System Overview
The image shows a water filtration system with blue filter cartridges. The float switch is mounted on the system to manage water levels automatically.
Down Float Switch Wiring Guide
This guide provides instructions for wiring a down float switch used in water pump systems. The diagram illustrates the connections required for proper installation.
Wiring Diagram
- To Motor: Connect the wires to the motor as shown to ensure the pump operates correctly.
- To Power Cord: Ensure the power cord is connected securely to provide power to the system.
- To Float Switch: Connect the float switch wires to control the water level in the system.

System Overview
The image shows a water pump system with a motor and pressure tank. The float switch is mounted on the system to manage water levels automatically. Note that the color of the components may vary.
Color subject to change
Specifications
| Component | Description |
|---|---|
| On/Off Switch | Controls the power to the float switch system. |
| Power Cord | Supplies electrical power to the system. |
| Float Switch | Automatically controls water levels by activating the pump or filtration system. |
| Motor | Drives the pump in the down float switch system. |
FAQs
What is the purpose of a float switch?
How do I connect the float switch?
Can the color of the components change?
Documents / Resources
![]() | CQE-PS Float Switch |
References
- User Manualmanual.tools

