Irfora 1CH Matter Switch Module

Product Information
- Product Name: Matter Switch Module
- Model: 1CH, 2CH, 3CH, 4CH
Technical Specifications
| Product type | Voltage | Max. load | Operation frequency | Operation temp. | Protocol | Operation range | Dimensions (WxDxH) | IP rating | Warranty |
|---|---|---|---|---|---|---|---|---|---|
| Matter Switch Module | AC100-240V 50/60Hz | 1CH: 10A/16A 2CH: 2x5A 3CH: 3×3.3A 4CH: 4×2.5A |
2.412GHz-2.484GHz | -10°C to +40°C | Matter | Not specified | Not specified | IP rating not specified | Warranty not specified |
Product Usage Instructions
- Safety Precautions
Before starting the installation process, ensure to turn off the power supply to prevent any electrical hazards. - Wiring Instructions
- Turn off the power supply before carrying out any electrical installation work.
- Connect wires according to the provided wiring diagram.
- Insert the module into the junction box securely.
- Configuration and Setup
After completing the wiring, turn on the power supply and follow the switch module configuration instructions provided in the manual for proper setup.
Frequently Asked Questions (FAQ)
- Q: What is the voltage range supported by the Matter Switch Module?
A: The Matter Switch Module supports a voltage range of AC100-240V at a frequency of 50/60Hz. - Q: What is the maximum load capacity for each channel of the switch module?
A: The maximum load capacity varies based on the number of channels: 1CH: 10A/16A, 2CH: 2x5A, 3CH: 3×3.3A, and 4CH: 4×2.5A.
Overview

TECHNICAL SPECIFICATIONS
- Product type Matter Switch Module
- Voltage AC100-240V 50/60Hz
- Max. load
- 1CH: 10A/16A 2CH: 2x5A
- 3CH : 3×3.3A 4CH : 4×2.5A
- Operation frequency 2.412GHz-2.484GHz
- Operation temp. -10℃ + 40℃
- Protocol Matter
- Operation range <100m
- Dims (WxDxH) 39.2×39.2×18 mm
- IP rating IP20
- Warranty 2years
- Certificates CE ROHS
with mounting clip

INSTALLATION
Warnings:
- Installation must be carried out by a qualified electrician according to local regulations.
- Keep the device out of reach of children.
- Keep the device away from water, damp, or hot environments.
- Install the device away from strong signal sources such as microwave ovens that may cause signal interruption resulting in abnormal operation of the device.
- Obstruction by concrete walls or metallic materials may reduce the effective operation range of the device and should be avoided.
- Do NOT attempt to disassemble, repair, or modify the device.
Wiring Instructions and Diagrams
- Turn off the power supply before carrying out any electrical installation work.
- Connect wires according to the wiring diagram.
- Insert the module into the junction box.
- Turn on the power supply and follow the switch module configuration instructions.

1CH Matter Switch Module

2CH Matter Switch Module

3CH Matter Switch Module

4CH Matter Switch Module

Home APP Instruction
Pay attention:
- The mobile phone lOS system version must be 16.0 or later.
- A home hub (such as HomePod, HomePod mini, App ble TV, or iPad)must be set up to add the Matter accessory to the home App;
- The Wi-Fi configured when pairing must be in the LAN with the hub.
Download App
- Open the APP Store, search the “Homekit” and download the APP.
- After the download, open the APP and log in using the local iCloud account.
Add device
- By default, the device is in standby mode(the pairing indicator flashes); without the network status, please press the reset key for 5 seconds, and then add the device.
- The Device only supports a 2.4GHz Wi-Fi signal, need to use the home hub to add.
Scan the device QR code to add

Add via Serial number
- The APP automatically searches for nearby devices, clicks the device icon, and inputs the serial number to add

- If no device is found, click “My Accessory Isn’t Shown Here”

Share device

Documents / Resources
![]() | 1CH Matter Switch Module |
References
- User Manualmanual.tools
Published: December 20, 2024
Updated: December 21, 2024

