Apps Ewpe Smart App Owner’s Manual

Apps Ewpe Smart App Owner’s Manual
Apps Ewpe Smart App

Installation Instruction of Wifi Module

Before installation, please confirm whether the purchased WiFi module complies with this unit.

WARNING:

  1. Installation must be performed by qualified professionals. Otherwise, it may cause personal injury or damage. Do not put through the power before finishing installation.
  2. Please cut off the power for the air conditioner before this operation.

Split Air Conditioner

Installation steps of WiFi module

  1. Open the panel of indoor unit as show in the fig and unscrew the screw on the electric box cover.
    InstallationInstallation
    NOTICE: Actual product may be different from above graphics, please refer to actual product.
  2. Open the electric box cover and you can see the WiFi connection wire. (The color of WiFi connection wire is the same as the color of connection port in WiFi module).
    Installation
  3. Remove the wire clip, pull out the WiFi connection wire from the electric box and then connect with the port in WiFi module.
    Installation
    NOTICE: the WiFi connection wire shall go through the wire groove otherwise the electric box cannot be closed.
  4. Place the WiFi module beside the electric box. After confirming the position, please fix the WiFi module with screws NOTICE the position for placing WiFi module may be different for different models: actual position please refer to the actual situation.
    Installation
    Installation
    Installation
  5. Neaten the WiFi connection wire, close the electric box cover and then tighten
    the screws.
  6. After closing the panel of indoor unit, the installation of WiFi module is done.

Control Flow Chart

Installation

Operating Systems

Requirement for Users smarm prongs:

iOS System IOS system Support iOS7.0 and above version
Android System Android system Support Android 4.4 and above version

QR Code
Ewpe Smart App Download Linkage

Scan the QR code or search “Ewpe Smart” in the application market to download and install it. When “Ewpe Smart App is installed, register the account and add the device to achieve long-distance control and LAN control of Ewpe Smart home appliances For more information, please refer to “Help” in App.

Documents / Resources

PDF thumbnailEwpe Smart App
Owner's Manual · Ewpe Smart App, Smart App, App

References

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Browse all questions about this manual

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. Je n’ai jamais pu connecter mon climatiseur Viesman à mon smartphone. la recg$herhe échoue systématiquement

    JL Caillet asks Je n'ai jamais pu connecter mon climatiseur Viesman à mon smartphone. la recg$herhe échoue systématiquement
    Manuals+ clarified question
    Question

    Why is my Viesman air conditioner failing to connect to the Ewpe Smart App during the search process?

    Answer

    If the Ewpe Smart App is failing to find your Viesman air conditioner, please check the following troubleshooting steps based on the manual and common app requirements:

    • Check Wi-Fi Frequency: Ensure your smartphone is connected to a 2.4GHz Wi-Fi network. Most smart home appliances, including those using the Ewpe Smart App, do not support 5GHz networks.
    • Reset the Wi-Fi Module: You may need to reset the Wi-Fi on the air conditioner to put it back into pairing mode. This is typically done by pressing a specific button combination on the remote (often the "WiFi" or "Mode" + "WiFi" buttons) until you hear a beep or see the Wi-Fi icon flashing.
    • Verify Hardware Installation: As shown in the manual, ensure the Wi-Fi module is correctly installed and the connection wire is securely plugged into the port inside the unit's electric box.
    • App Permissions: Ensure the Ewpe Smart App has permission to access your Location and Bluetooth (if applicable) in your smartphone settings, as these are often required for the initial search and pairing process.
    • Operating System: Confirm your phone meets the minimum requirements: iOS 7.0 or above, or Android 4.4 or above.

    If the search still fails, try using the "Manual Add" option in the app instead of the automatic search, and follow the on-screen prompts to connect directly to the unit's temporary hotspot.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.