DAOLAR Type2 EV Charging Cable User Manual

DAOLAR Type2 EV Charging Cable

Technical support

EmaiI: support@daoIar.com
www.daolar.com

Main part and parameter

*Plug and connector do not mate together
Parameter

Quick Use Steps and Important Note

Start charging 

1. Firmly insert the Type 2 male plug into the outlet socket on the AC EVSE (Charging Station).
2. Insert the Type 2 female plug into the inlet socket on the electric vehicle.
3. Lock your electric vehicle and the AC EVSE will charge the vehicle.

Stop charging 

1. Disconnect the Type 2 female plug from the vehicle inlet.
2. Unplug the Type 2 male plug from the EVSE outlet to disconnect power.
3. Put the EV charging cable away.

Important Note 

1. This is a Mode 3 EV charging cable special for EVs With Type 2 inlets. Don’t use it for EVs with different inlet types.
2. This cable has a precise internal structure. Any questions, please contact our Customer Service the first time. Please don’t disassemble it without any professional technical support.
3. Don’t use it in water.
4. The product is only for EV charging. Please don’t use it in any other occasions, including hauling, binding, and so on.
5. Do not use the device if the cable is damaged.
6.  Mind the risk of electrical shock or burn.
7. The device does not contain any user-serviceable parts.
8. Please do not disconnect the plugs while the AC EVSE is charging the vehicle.

Common Problems