Wireless Intercom Doorbell User Manual
Power On / Off:
Press and hold
button for 5 seconds to power on / off the receiver.
Transmitter doesn’t need to be powered on.
Calling and Answer:
Press the call button
on the transmitter. The receiver will ring and press
Button to answer. It is fully handfree and duplex communication. When the call is over, press
button to hang up. After the call, put the receiver back to the charging base.
Volume: Press the VOL- or VOL+ button to change the volume. Volume has 8 levels from 1 to 8.
Receiver Music:
After the receiver is powered on, press and hold button for 5 seconds to change the music. There are 4 music available.
Pairing:
After the receiver is powered on, press and hold VOL- and VOL+ buttons together for 5 seconds until it says “Searching”.
Press and hold the call button
on the transmitter until you hear “Successful”. Now the pairing is done.
When fully charged, the transmitter can be used for 4 months.
When fully charged, the receiver can be used for a week.
Transmitter LED Indicator: The LED indicator light is red when charging and the red light is off when fully charged. LED indicator is always blue during the call.
Receiver LED Indicator: The LED indicator light is red when charging and the red light is off when fully charged.
When the receiver is in the standby state, the LED indicator will light up blue every five seconds.
Manufacturer: Shanghai Biancheng Electronic Technology Co., Ltd.
Address: Building #C, 180 South Changjiang Road, Shanghai, China
TEL: +86 15921788065
Website: www.wirelesslinkx.com
Documents / Resources
![]() | Wireless Intercom Doorbell |
References
- Tour guide system, Wireless tour guide system, Pager system, Wireless calling system, Pager – WirelessLinkxwww.wirelesslinkx.com
- User Manualmanual.tools

Hello, does the wireless doorbell intercom system have a audio jack (to plug into louder speaker)? or can you program/pair with a external speaker? This capability would make it more applicable in a warehouse application. We have found common wireless doorbells are not very loud. Thank you.
Does the AGJ Wireless Intercom Doorbell have an audio jack or support pairing with external speakers for louder volume?
Based on the AGJ Wireless Intercom Doorbell User Manual, the system does not feature an audio jack (3.5mm or otherwise) for connecting to external speakers, nor does it mention support for pairing with Bluetooth or wireless external speakers.
The device is designed as a standalone handheld or cradle-based intercom. To manage volume within its existing hardware, you can use the VOL+ button on the receiver. The system supports 8 volume levels (from 1 to 8). If the maximum volume (level 8) is insufficient for a noisy warehouse environment, the manual does not provide a built-in method to further amplify the sound.
Read the full Q&A page
Hello. Does the wireless doorbell intercom system have an audio port (to connect to an external speaker) or can you Bluetooth/pair with an external speaker? It would make this a perfect tool for a warehouse application. most wireless doorbells are not that loud.
Does the AGJ Wireless Intercom Doorbell have an audio port or Bluetooth for external speaker connection?
Based on the provided user manual for the AGJ Wireless Intercom Doorbell, the system does not feature an audio port (3.5mm jack) or Bluetooth connectivity for external speakers. The device is designed as a standalone handheld receiver with a built-in speaker.
The manual specifies that the receiver has 8 volume levels (from 1 to 8) which can be adjusted using the VOL- and VOL+ buttons. While it is intended for duplex communication and hands-free use, there are no documented hardware or wireless options to route the audio to a larger external sound system for noisy environments like a warehouse.
Read the full Q&A page