TT MOUNT 2.0 – RACE & MODULAR
TT Mount 2.0 Race and Modular
STAY AERO. MOVE YOUR COMPUTER, NOT YOUR HEAD.
With the unique range of adjustability, the 76 Projects TT Mount allows the rider to maintain an aero position whilst viewing key data from their computer screen.
We recommend the mount be placed behind the hands whilst in riding position and angling the screen for perfect viewing. This will minimise head movement and helps to maintain concentration.
- Aero position maintained
- Perfect symmetry
- Optimised viewing
- 3 way adjustability
Standard
- Negatively impacts aerodynamics (increased head movement)
- Limited ability for positioning
TT MODULAR
- Replaceable insert
- Module system for lights & devices.
- Bar centres 65-105mm
TT RACE
- Low profile
- Computer only
- Bar centres 60-100mm
CONTENTS
TOOLS REQUIRED
SPACERS GUIDE
| Pace – Centre to Centre mm | Modular – Centre to Centre mm | Screws mm | Spacers mm |
| 60 | 65 | 20 | |
| 64 | 69 | 20 | 2 |
| 66 | 71 | 20 | 3 |
| 70 | 75 | 25 | 5 |
| 74 | 79 | 25 | 5+2 |
| 76 | 81 | 25 | 5+3 |
| 80 | 85 | 30 | 10 |
| 84 | 89 | 30 | 10+2 |
| 86 | 91 | 30 | 10+3 |
| 90 | 95 | 35 | 10+5 |
| 94 | 98 | 35 | 10+5+2 |
| 96 | 101 | 35 | 10+5+3 |
| 100 | 105 | 40 | 10+5+3+2 |
EXPLODED DIAGRAM
STEP ONE
Choose your desired position for optimum viewing.
Tilt = 15° Step
Taper = 0° to 10°
Width (see guide)
STEP TWO
Measure width of bar centres.
Use guide to calculate screws and spacers required.
Fit rubber pads and assemble see exploded diagram
STEP THREE
Make final adjustments.
Thread strap, pull to remove slack only.
DO NOT OVERTIGHTEN
See video link below
https://cdn.shopify.com/videos/c/o/v/1de97f88be964663bc05a8366c6c8d2d.mp4
76PROJECTS.COM
Documents / Resources
 | 76 PROJECTS TT Mount 2.0 Race and Modular [pdf] Instructions TT Mount 2.0 Race and Modular, TT Mount, 2.0 Race and Modular, Race and Modular, Modular |