SC405
Handheld Barcode Scanner
2D with Base
User Manual
Scanner Overview
Barcode scanner
Note: Product appearance depends on goods
Cable plug&Unplug
(Pluggable scanner applies)
- Plug as picture above
- Press the buckle click, then pull out the cable
Connection Guide
- USB cable
- RS232 cable
Lights Indicator
| LED Indicator | Explanation |
| Blue light blinking | Decoding Successfully |
| Blue light On | Standby status |
Buzzer
| Beep Indication | Explanation |
| One Beep | Decoding Successfully |
| Two Beep | Successfully parameter setting |
Scanning Angle
Methods
The aiming beam should be centered over the bar code, but it can be positioned in any direction for a good read.
Troubleshooting Q & A:
USB bar code scanner without data upload and after scanning. Unplug and plug the scanner into another USB port or reset the interface mode to “USB HID Keyboard”. No LED light out after connection via Rs232. Refer to Data cable connection guide and check the power supply No data upload and alarm buzzer after scanning via Rs232. Terminal should have software to transfer data when using RS232,not cursor position.
Decode Setting
Configuration method: Scan the function bar code directly.
① Defaults Parameter
② Firmware Version
Scan the following bar code to display the firmware version number.
③ Interface Mode
According to your requirements to select the correct interface mode as blow.
④ Auto Trigger
When the scanner detects an object in its field of view, it will be trigger and attempt to decode without press the button
⑤ Suffix Values
Suffix can be appended to scan data for use in data editing.
⑥ Keyboard Language
The selecting of key board layout supports many country.
⑦ Code 39 Setting
⑧ lllumination
⑨ Symbologies
Read this function bar code to enable decode all bar code types.
Documents / Resources
 | 3nStar SC405 Handheld Barcode Scanner 2D With Base [pdf] User Manual SC405 Handheld Barcode Scanner 2D With Base, SC405, Handheld Barcode Scanner 2D With Base, Barcode Scanner 2D With Base, Scanner 2D With Base, With Base |