Boat Rockerz 295 / 255 Earbuds Manual


Boat Rockerz 295

Boat Rockerz 295 / 255 Earbuds Manual

BOAT SPORTS
THANK YOU
Thank you for purchasing the boAt Rockerz 295 Sports wireless earphones and welcome to the boAt Family!

NOTE: Before using this product, please read and follow the instructions carefully in the user’s guide. It will help you set up and operate your wireless earphones properly.. Please keep this user guide for future reference.

Boat

CAUTION
• Do not use abrasive cleaner to clean your boAt Rockez 295 because this could cause scratches and damage.
• Do not bring your boAt Rockers 295 in contact with any shags objects because this could cause scratches and damage.
• Do not inset anything into your boAt Rockerz 295 unless otherwise specified in the user Instructions. This may damage die internal components.
• Do not attempt to repair, modify, or disassemble your boAt Rockerz 295 yourself, it does not contain any user-serviceable compounds.
• Do not attempt to replace your boAt Rockers 295 battery, it Is built-In and is not changeable.
• Observe all signs and displays that require an electrical device or RF radio product to be switched in designated area.
• Dispose off the boAt Rockery 295 and the bolt Rocken 295’s battery in accordance with local regulations. Do not dispose of the battery with regular household waste.

Fire and electric shock hazard
• Do not expose your boAt Rockers 295 to extremely high or low temperatures.
• Do not leave your boAt Rockers 295 in direct sunlight for extended periods of time.
• Do not leave your boAt !lodes 295 near open flames such as cooking burners, candles, orfireplaces.
• Do not put water or any other liquid on boAt Rockers 295, the earphone is water resistant but not water proof.
• Do not block any ventilation openings.

Battery/charger hazard
• Do not dispose of your boAt Rockers 295 in afire. The battery could explode causing injury or death.
• Only charge the battery in accordance with the user instructions supplied with the boAt Rockers 295.
• Do not attempt to disassemble the boAt Rockers 295 charger of force open the built-in battery because this may result in electric shock.
• Do not clean the boAt Rockers 295 when it h being charged. Always unplug the charger first before cleaning the boAt Rockers 295.

SAFETY INFORMATION
WARNING
Please read these warnings and safety cautions carefully to insure your personal safety and prevent property damage.

IMPORTANT SAFETY INFORMATION
Listen Responsibly
To avoid hearing damage, make sure that the volume on your music player is tumed down before connecting your earphones. After placing earphones in/on your ears, gradually tum up the volume until you reach a comfortable listening level. Noise levels are measured in dedbels (dB), exposure to any noise at or above 85 dB can cause gradual hearing loss. Monitor your use; hearing loss is a function of loudness versus time. The louder it is, the less time you can be exposed to it. The softer it is, the more time you can listen to it.

Use Responsibly
Do not use boAt Rocken 295 when its unsafe to do so- while operating a vehicle, crossing streets, or during any activity or in an environment where your full attention to your surroundings is required. Its dangerous to drive while wearing earphones. In many places it is illegal because it demeases your chance of hearing life-saving sounds outside of your vehicle such as another cars hom and emergency vehkle sirens. Please avoid wearing your earphones while driving.

Pairing 2 devices simultaneously
Multi point technology enables you to pair headset to two phones at the same time and take calls from either device. Pair the boat Rockerz 295 to first phone per usual pairing procedure,then switch off headset. Then switch on headset again and enter pairing mode, enable Bluetooth function in second phone, find headset’s Pairing Name “boat Rockers 295” and pair to second phone per usual procedure. Switch off headset one more time. Then simply switch on headset, without entering pairing mode (a short press until blue light comes on).The headset should automatically re-connect to the last connected phone (which is the second phone). Then find headset “boat Rakers 295′ in fist phone’s Bluetooth setting, select this to panto SW phone. Both phones should now be paired to the earphone.

Pairing 2 devices

Boat

SPECIFICATION
• Drivers: 2x8mm
• BT Version: V 4.1
• Chipset: C5118640
• Bluetooth Profile: HSP, HFP, AVCRP and A2DP
• Bluetooth Range: <10m, Class 2
• Battery: 2x40mAh
• Playback Time: Upto 8 hours
• Charging Time: 1.5 hours
• Standby Time: 180 hours
• Impedance: – 161)
• Sensitivity (dB): 105dB±3dB
• Frequency Response: 20Hz to 20,000Hz
• Water proof profile: – IPX4

Product Overview

Product Overview

1. Volume + / Track forward
2. LED indicator
3. Charging jack
4. Multi function button
5. Mic
6. Volume -/Track back

BASIC INSTRUCTIONS
Charging the earphones
Use the Micro USD cable and connect earphones to your computer or adapter device made for USD charging. A red LED indicator will tum on when the earphones are charging. The red LED light will start flashing blue once they are fully charged. Low battery is indicated when the LED starts blinking red.

Charging the earphones

Pairing
1. Make sure your phone, computer or music device is turned on and within 1 meter of the earphone.
2. Hold down the multifunction button (play,pause,power) on the earphone until Blue and Red LED starts flashing alternately (About 5 seconds) and then release the button.
3. Activate the Bluetooth feature on your phone or device and set it to search for Bluetooth device (discoverable). 4. Select “boAt Rockerz 295” from the list of found devices.
5. Once successfully paired, the LED light will flash Blue once every few seconds.
6. If necessary,inter pass code “0000” to pair and connect the earphones to your device.

Power Off
1. To Power off, press and hold the multi functional button and LED will flash red and tum off.
2. If Bluetooth earphone is not connected to any device within 5 minutes, it will turn off automatically.

Playback/Controls
1. Press Multi function button (play,pause,power) once to play or pause audio.
2. Long Press (Volume +) button on the side of the earphone to skip forward to next track. Short Press the (Volume +) button to increase volume.
3. Long Press (Volume -) button on the side of the earphone to go back to previous track. Short Press the (Volume -) button to decrease volume.

NOTE: The controls will not function when charging.

Calls
1. To answer an incoming call, press the multi function button, with (play,pause,power) symbol on it.
2. To end a call, press the Multi function button during call, with (Play,Pause,power) symbol on it
3. To reject a call, press the Multi function button, with (play,pause,power) symbol on it for 2 seconds.
4. To dial to the last call number, double press the multi function button with (play,pause,power) symbol on it
5. To switch a call between your phone and earphone, hold down the Volume+ button for about 2 seconds. This can be done again to switch back to the previous setting.
6. To answer a new call and keep the current call on hold, press the Multi function button (play,pause,power) for about 2 seconds.

FCC Warning:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and

(2) this device most accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FCC ID: 2AFL7-ROCKERZ295

Questions about your Boat Rockerz 295 / 255 Earbuds Manual? Post in the comments!
Boat Rockerz 295 / 255 Earbuds Manual [PDF]

QCY T1 Pro Q38/TWS Bluetooth Earphones Manual


QCY T1 Pro Q38

QCY T1 Pro Q38/TWS Bluetooth Earphones Manual

Overview
1. Change EarTip

Change EarTip

It is suggested that you try Middle EarTip first as it fits most people.

2. How to wear
How to wear

Adjust its end towards your mouth .

TWS Mode

Remove Insulated Sticker

1. Remove the sti ckers on both Ear Buds and plug the EarBuds back in Charging Case as a way to activate EarBuds.

Notes: if EarBuds are unable to be charged, please charge for the charging case via USB cable first(for more details, please refer the following steps).

Take out the right EarBud

2. Take out the right EarBud and hold its MFB for 5s to trigger pairing mode then wait for auto connection with cellphone. After the auto connection is done, take out the left EarBud and hold its MFB for 1s to power on. Now wait until two EarBuds auto connect with each other(LED blinks red and white for 1s).

(Try the following step if you fail to build connection between two EarBuds)

Connection between two EarBuds

Take out both two EarBuds and hold MFBs on both of them for 1s to power on. Then double tap MFBs on both EarBuds separately and wait until two of them auto connect with each other (LED blinks red and white for 1s).

Operation in Stereo Mode

Power-on
Hold MFB for 1s(LED will turn to white)

Power-off
Granting two EarBuds connect with each other, hold MFB on either EarBud for 3s to power off both of them(LED will turn to red for 2s)

Factory Setting
Hold MFB/s for 5s(LED/s will blink red and white) when EarBud/ s charged. Once reset EarBud/s to factory, all pairing list will be erased.

Play Media in both EarBuds

Play Media in both EarBuds

Play/Pause
When two EarBuds are connected with e ach other and cellphone, tap MFB on either EarBud to play/pause music. Skip Track Forward Double tap MFB on either EarBud to track forward.

Mono Mode
Mono Mode

1. Hold MFB on either EarBud for 5s to enter pairing mode.
(LED will blink red and white.)
2. On cellphone, search for “QCY-Q38” and tap to connect.
3. The connection has been completed.

Operation in Mono Mode
Power-on
Power-on Hold MFB for 1s(LED turns to white)
Power-on

Power-off
Hold MFB for 3s(LED will be red for 2s)

Power-off

Ignore Call
Hold MFB for 1s to ignore incoming call.

Ignore Call

Answer Call
Tap MFB to answer incoming call and tap it again to end the call.
Notes: Only EarBud connected with cellphone is able to deal with incoming call.

Answer Call

Switching Audio Output between Cellphone and EarBud
When calling, you may hold MFB for 1s.

Switching Audio Output

Mute On/Off
When calling, you may double tap MFB to switch mute on/off.
Mute On-Off

Play/Pause
Tap MFB to play/pause music.

Play-Pause

Skip Track Forward
Double tap MFB to track forward.
Skip Track Forward

Three Way Calling
Activate call waiting facility on your cellphone.(you may refer to cellphone’s manual for more details.)
1. Activate call: Whenever you are on a call and have another incoming call from another cellphone at the same time,you may tap MFB to activate the second call while put the first one on hold.
Ignore call: Whenever you are on a call and have another incoming call from another cellphone at the same time, you may hold MFB for 1s to ignore the second call while keep talking on the first one.

2. Switch b etween held call and active call: Double tap MFB to switch between the two calls.
End call: During three way calling, hold MFB for 1s to end the active call while re-activate the held one.

Voice Control
Hold MFB for 1s to activate voice assistant(like Siri)

Single EarBud Re-connecting with Cellphone
Power on single EarBud(LED will turn to white) then tap MFB to reconnect to the last connected device.(the EarBud was once connected with device before.)

Charging for Earphones
Low battery will be warned by voice prompt.
(LED will be solid red when charging and turn off once fully charged.)

Charging for Earphones

Plug EarBuds back into Charging Case.(Pogo pins should be contacted properly.)

Charging for the Charging Case
LED will be solid red when charging and turn to blue once fully charged.

Charging for the Charging Case

Charge the case via USB cable

Feature

Feature

Parameters
Model number: QCY-Q38
Stand-by time: Approx.80hr
Battery type: Li-polymer
Size: 25.3×17.3×29mm
Operation range: 10m(no obstacle)
Bluetooth profile:HFP/HSP/A2DP/AVRCP
Battery capacity(EarBud): 3.7V 43 mAh
Battery capacity(Charging Case):3.7V 220mAh
Input parameter(Charging Case):5V 250mA
Bluetooth version:V4.2
Weight: 5.3g
Talking time: Approx. 3hr

After Service and Support

1. Warranty Period
1)Returning: 1 year after you purchase this item.
2)Repairing: 2 years after you purchase this item.

2. Free Returning will Only be Accessed under All of Following Circumstances
1) 1 year after you purchase this item.
2)Three completed guarantee receipts have to be provided to distributor(item model No., sales date and item serial No. shall be displayed on invoice and warranty card).
3)Required item has to be with full package and accessories.
4)Malfunction has to be caused by quality deficiencies.
Notes: Exchanged item will have the same model No. and spec. as your required one’s.

3. Free Repairing will Only be Accessed under All of Following Circumstances
1) 2 years after you purchase this item.
2)Three completed guarantee receipts have to be provided to distributor(item model No., sales date and item serial No. shall be displayed on invoice and warranty card).
3) Malfunction has to be caused by quality deficiencies.

Free repairing & returning will not be accessed under following circumstances
A: Item is out of warranty period or effective sales receipt and warranty card fail to be provided.

B: Breakdowns of housing, bags, gifts and accessories or any non-functional fault.

C: Unauthorized disassembly, breakdowns caused by improper operation or using in environment which is forbidden in user’s manual.

D: Artificial damages(including but not limiting to leaking, damped, dropping off, squeezing, breaking, burning and distortion).

E: Faults caused by force Majeures(such as earthquake, fire and flood).

Hazardous substances and their contents in the item
Hazardous substances and their contents in the item

Lifespan:
As the booklet states, the eco-lifespan of the item is 5 years while using it in normal ways. During the period, no dangerous material will be leaked. The item must be recycled by the local law.

Tips
1.Before using the headset, please read the manual carefully and keep it for future references.

2.The headset need to be fully charged prior to first-time use.
3.If the headset is left unused for over two weeks, please recharge it periodically.

4.Please use the chargers made by qualified manufacturer.
5.If the headset cannot be found by your phone, please check whether it is in pairing mode; if left unconnected for a long while, the headset will exit pairing mode, please re-enter the mode; if a procedure error of your phone occurs, reboot it; if a procedure error of the headset occurs, reboot or reset it.

6. If the t wo uni ts can not connect with each other automatically when switched on. Please hold the MFB of both units until the white light is on then move them approaching each other and wait for the connection completed.

Caveats
1.Never disassemble or modify your headset for any reasons to avoid any damages and danger.

2.Do not store the headset in extreme temperatures (under 0℃ or over 45℃).

3.Avoid using the indicator close to the eyes of children or animals.

4.Do not use this headset during a thunderstorm to avoid irregular function and increased risk of electric shock.

5.Do not use harsh chemicals or strong detergents to clean the headset.

6.Keep the headset dry.
Notes: Please arrange using time properly since your hearing may be damaged by using the device for a long time.

For any after service, please contact local distributor
Perform standard: Q/HL 1-2016
Manufacturer: Dongguan Hele Electronics Co., Ltd.
Address: Dalingya Industrial Zone, Daojiao Town,Dongguan City, Guangdong Province(QCY Environmental Zone, Dayaling No.5, YuehuiRoad)

FCC Statement

Questions about your QCY T1 Pro Q38/TWS Bluetooth Earphones Manual? Post in the comments!
QCY T1 Pro Q38/TWS Bluetooth Earphones Manual [PDF]

Boat Rockerz 390 Over-The-Ear Headphones Manual

Boat Rockerz 390

Boat Rockerz 390 Over-The-Ear Headphones Manual

Headphone Specifications:
Driver Unit Size: 40mm
Frequency Response: 20Hz to 20KHz
Impudence: 640 Sensitivity: 954+10%dB
Mic Sensitivity: 58dBi3dB

Battery Information:
Built-in Battery: Lithium
Input: DC 5V/300mA
Battery Capacity : 300mAH
Music playing time: Up to 6 hours.
Charging time: 1-2 Hours

‘Approximate playback Mos. Battery life depends on individual use and may be slightly more or less than the time specified.

Bluetooth Information:
Bluetooth Specification: V3.0 Operating
Distance: 10 Meters(Class 11)
System Requirements: Bluetooth-capable device

Additional Connection Sources:
Power Source: Built-in rechargeable battery or via USB cable

Technical Support:
Please do not attempt to fix the product by yourself. If you are experiencing any problems with the product, please do not return it to the store you bought it from. You can contact our technical support representatives and they will assist you with any questions you might have.

For assistance operating your product, please consult the User’s Manual first, then feel free to contact Imagine Marketing India for technical support:
Warranty

Connect Us on:
Connect us on

Boat

Package Includes:
1 Bluetooth Headphone
1 Micro USB Cable

Features:
• Automatically reconnects with the last connected Bluetooth device.
• Rechargeable battery provides up to 6 hours of continuous playback.
• Built-in on-ear controls let you control your music,adjust the volume,and answer calls

Powering On/Off
Hold button to power on device and stop playback. Please ensure the headset is fully charged before use.

Bluetooth Pairing/Connection
Switch on the product. Bluetooth mode will be activated automatically. Enable BE function on your media device. Search the Bluetooth device named Rockers 390. Click or tap to connect (pair). After successful connection (pairing) you will hear a chime. Now you can play music, or use Bluetooth phone functions.

Music Playback Functions
• Connect your device to the BoAt Rockers 390 via Bluetooth (refer to the “Pair Connect. section)
• Open your favorite music spy and press play.
• Control the music & volume from the right side button on the BoAt Rockerz 390.
• Press the Power button once to play/pause music IS answer calls, press ft twice to redial the last number called on your phone, and press 8 hold it to reject an Incoming call.

Included Cable:
Micro USB
Micro USB

• To charge your device. Plug the small side of the micro USB cable into the USB charging port on your headset and plug the large end into the USB port on a computer, or AC adapter (Not Included).
• Solid red LED light will appear on the power button to indicate when the headphone is charging, even while headphone is turned off.
• When charging is complete, the LED light will turn blue.
• Charging time is approximately 1-2 hours. NOTE: If the boAt Rocker. 390 is not used within 5 minutes,the headphones will automatically turn off to save battery.

Press & Hold (3 Sec):Power On/Off
Press & Hold (3 Sec):Enter Pairing Mode
Click Once:Play/Pause,Answer/End Calls
Double Click: Re-dial Last Dialed Phone Number
Press & Hold (1-2 Sec):Reject Incoming Call

Changing Song Next Track : press A long goes to next track
Increasing Volume High : press A short can Increase volume.
Changing Sang Previous Track : press V long goes to previous track
Decreasing Volume : press V short can decrease volume

Feature

WARNING: To reduce the risk of ‘fire or electric shock, do not expose this apparatus to minor moisture.

CAUTION : Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s warranty.

WARNING: Do not place the unit on top of any rough or hard surfaces to avoid damaging the product. Use a protective barrier between the unit and surface to protect the product.

WARNING: Use of this unit near fluorescent lighting may cause interference. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause.

Important Safety Instructions:

1. Read the instructions carefully.
2. Do not lose the instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
8. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions.

8. Follow applicable laws and regulations for transport, shipping, and disposal of batteries. For details on recycling lithium, lithium phosphate, and lithium ion batteries, pleases contacts a government recycling agency, or your waste disposal service.

9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
10. Only use the attachment/accessories specified by the manufacturer.
11. Unplug this apparatus during lighting, storms or when unused for long periods of time.

12. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power —supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

13. Headphones am capable of produdng sound levels which can be harmful to your hearing. Do not listen at high volume for prolonged periods of time. Headphones may block out surrounding sounds. Never wear headphones while operating a vehicle. Use with caution. Users assume all risks associated with the use of this product

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protector against harmful interference in a residential installation. This equipment generates uses and can radiate frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,
(2) this device must accept any interference received, including interference that may cause undesired operation.

Questions about your Boat Rockerz 390 Over-The-Ear Headphones Manual? Post in the comments!
Boat Rockerz 390 Over-The-Ear Headphones Manual [PDF]

JBL Flip 4 / 4A Manual


JBL Flip

JBL Flip 4 / 4A User Manual

FLIP4: Quick Start Guide

1. What’s in the Box

in the Box

2. Buttons
Buttons

3. Connections
Connections

4. Bluetooth

1. Bluetooth connection
Bluetooth connection

2. Music Control
Music Control

3. Speakerphone
Speakerphone

5. Voice Assistant
Tap ” Voice Assistant” in the JBL Connect App. to Make the Button Button as the activation key of the Siri or Google now on your phone.
Voice Assistant

6. JBL Connect
Wirelessly Links 100+ JBL Connect+ Compatible speakers together .

Step-1
Step-1

Step-2
Step-2

Play Music in one of your JBL Speakers and then press the JBL connect+ on all desired speakers to start pairing.all the other speakers play same music from the music source.
Download the JBL Connection App from followings feature:stereo setup, firmware, upgrade, and device reaming.
Appstore

JBL Connect+

JBL Connect

 

7. LED Behavior LED Behavior

8. Warning
Warning

JBL Flip 4 is IPX7 waterproof.
IMPORTANT: To ensure that the JBL Flip 4 is waterproof, please remove all cable connections and tightly close the cap; exposing the JBL Flip 4 to liquids without doing so may result in permanent damage to the speaker. And do not expose JBL Flip 4 to water while charging, as doing so may result in permanent damage to the speaker or power source. IPX7 waterproof is defined as the speaker can be immersed in water up to lm for up to 30 minutes.

Feature:
• Bluetooth version: 4.2
• Support: A2DP V1.3, AVRCP V1.6, HFP V1.6, HSP V1.2
• Transducer: 2 x 40mm • Output power: 2 x 8WRMS
• Frequency response: 70Hz – 20KHz
• Signal-to-noise ratio: a80dB
• Battery type: Lithium-ion polymer (3.7V, 3000mAh)
• Battery charge time: 3.5 hour @ 5V1A
• Music playing time: up to 12 hours (varies by volume level and audio content)
• Bluetooth transmitter frequency range: 2.402 – 2.480GHz
• Bluetooth transmitter modulation: GFSK, n/4-DOPSK, 8DPSK
• Dimensions (H x W x D): 68x 175 x 70 (mm)
• Weight: 515g

Bluetooth

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trademarks are those of their respective owners.
Anatel

Questions about your JBL Flip 4 / 4A Manual? Post in the comments!
JBL Flip 4 / 4A Manual [PDF]

Haylou GT1 TWS BT Earphones Manual

Haylou

Haylou-GT1 TWS BT Earphones Manual

Haylou Logo

Overview
Charging Case

Charging Case

What’s in the Box
BT earphones, Charging case, EarTips × 2 pairs, Manual, Charging cable.

Earphones
Earphones

Medium Ea r T i p s h ave been assembled in advance. However, you may try large or small ones, if the medium ones do not fit you well.

keep Mic Outside

When calling, adjust Mic towards mouth to gain clear calling.

Power-on
Take out earphones from the case to power on them. Or touch both panels for 1.5s to power on earphones (LED glows solid white) when they are not in the case.

Power-on

Power-off
Put earphones into the case to power off them. Or touch both panels for 4.5s to power off earphones. (LED glows solid red for 2s).

Power-off

Ignore Call
Touch the panel for 1s to ignore incoming call.

Ignore Call

Stereo Mode
Auto pairing: take out both EarBuds from the case and they will auto pair with each other in 2 or 3s. Earphones will be connectable to cellphone when white slowly. On cellphone, LED on right EarBud blinks search for “Haylou-GT1_R” and tap to connect. If earphones fail to be connected to cellphone, please put EarBuds back to the case and repeat the above steps. Earphones will auto reconnect to the last device in connectivity records, if any.

Note: earphones have been setted to factory when shipping out.

Stereo Mode

Manual pairing: manually power on two EarBuds and they will auto pair with each other when LED blinks white promptly. Then LED on the right EarBud will blink white slowly and now you can tap it on cellphone to connect.

Mono Mode
Auto pairing: take out one EarBud from the case to power on it. Its LED will soon blink slowly then search for Haylou-GT1 R/L on cellphone and tap to connect. EarBud will auto reconnect to last device in connectivity records, if any.

Note: it may take more times for the left EarBud to reconnect

Manual pairing: manually power on one EarBud. Its LED will soon blink white slowly then search for it on cellphone and tap to connect

How to Charge
Prior to using, please peel off sticker on the pogo pins and top up the earphones.

How to Charge

Play/pause
When standby, touch the panel to pause/play music.
Note: media player should run in background.

Play-pause

Voice Assistant
When standby, triple touch the panel to activate voice assistant.
Note: device needs to support voice assistant and fast awakening be turned on.

Voice Assistant

Answer/End Call
Double touch the panel to answer incoming call and double touch the panel again to end it.

Answer-End Call

Skip Track Forward/backward
Touch the panel on right earbud twice to skip track forward.
Touch the panel on left earbud twice to skip track backward.

Three-way Calling & Switch
Touch the panel twice to answer incoming call from phone. if another call is coming in sync , touch the panel to put the first call on hold while activating the second one. Double touch the panel to switch between active call and held call.

Switch Audio Output
When calling, touch the panel for 1s to switch audio output between earphones and cellphone.

Factory Setting
If earphones do not function well, please refer the following steps to reset factory: take EarBuds out from the case. Power off the earphones then toch both panels for about 15s ( LED will blink red and white three times twice). After that, put them back to the case. Delete connectivity record on cellphone before processing another pairing. (All connectivity records relating to the EarBuds will all be removed).

Basic Parameters
Operation range: 10m(with no obstacle)
Battery capacity: 43mAh(single EarBud)
Changing time: approx. 1.5hr
Calling time: approx. 3.5hr
Standby time: approx. 150hr
Input parameter: 5V 100mA
Battery type: li-ion
Wireless connection: BT 5.0
Charging case
Input parameter:5V 500mA
Output parameter:5V 150mA
Charging time: approx. 2hr
Standby time: approx. 4 months
Battery capacity: 310mAh
Battery type: li-ion

Caveats
1. Never disassemble or modify your headset for any
reasons to avoid any damages and danger.
2. Do not store the headset in extreme temperatures
(under 0℃ or over 45℃).
3. Avoid using the indicator close to the eyes of
children or animals.
4. Do not use this headset during a thunderstorm to avoid
irregular function and increased risk of electricshock.
5. Do not use harsh chemicals or strong detergents to
clean the headset.
6. Keep the headset dry.

Warranty Card
Warranty Period
12 months after the next day receiving this item. Free exchange service will not be accessed under
following circumstances:
1. Damages caused unauthorized disassembly.
2. Defects or physical damages caused by leaking or dropping off.
3. Damages by act of God.Supposing your item is within any damages or defects except the above circum stances, please return to us or your distributor for free repairing.

Tips
1. Before using the headset, please read the manual carefully and keep it for future references.
2. The headset need to be fully charged prior to first-time use.
3. If the headset is left unused for over two weeks, please recharge it periodically.
4. Please use the chargers made by qualified manufacturer.
5. If the headset cannot be found by your phone, please check whether it is in pairing mode; if left unconnected for a long while, the headset will exit pairing mode, please re-enter the mode; if a procedure error of your phone occurs, reboot it; if a procedure error of the headsetoccurs, reboot or reset it.

Address: Suite 1303, 1305 and 1306, 13/F, Project Phrase
2 of Gaosheng Tech Tower, Gaosheng Tech Park,
No.5 Longxi Road, Zhouxi Community, Nancheng
District, Dongguan City, Guangdong, China.
Manufacturer: Dongguan Liesheng Electronic Co., Ltd.
Web: www.haylou.com
Perform standard: Q/LS 1-2018
Made In China

Hazardous substances and their contents in the item
Hazardous Substances

WEEE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

Questions about your Haylou GT1 TWS BT Earphones Manual ? Post in the comments!
Haylou GT1 TWS BT Earphones Manual [PDF]