Onn 8″ Tablet User Manual [Walmart ONA19TB002]

PRODUCT GUIDE

Ver.0.1 REV.01/28/2019

Introduction
Thankyou for purchasing the onn Android M 9 Pie tablet with Google Play. Featuring a fast and responsive quad core processor, this tablet is perfect for accomplishing
everyday tasks, streaming music and movies, taking photos, checking emails, and engaging with social media.

The tablet offers 16GB of internal storage, Bluetooth connectivity, Micro SD slot for up to 128GB of additional storage,on-the-go productivity services, and a utility app.

The following information will help you get the most out of your tablet.
What You Should Know to Ensure Best Performance:

• Charge the battery completely before first use.
• While updates download in the background, tablet performance can affected until
completed,
• Close unused applications. Open apps that run in the background will affect overall performance.
• Battery Consumption: Play times on a fully charged battery will vary depending on your display settings, apps that remain open, and internet use (ie: streaming video content).
• Suggest customer use tablet screen protector and tablet case to protect the tablets

Important Safety Instructions
1 -Read these instructions-All the safety and operating instructions should be read before this product is operated.

2.Keep these instructions-The safety and operating instructions should be retained for future reference.

3.Heed all warnings-All warning on the appliance and in the operating instructions should be adhered to.

4. Follow all instructions-All operating and use instructions should be followed.

5.Do not use this apparatus near water-The appliance should not be used near water or moisture-for example,in a wet basement or near a swimming pool,and the like.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiotherapist other apparatus
(including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other.A grounding plug has tow blades and a third grounding pr g. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet.
Consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at the plugs,convenience receptacles,and at the point where they exit from the apparatus.

11. only use attachments/accessories specified by the manufacturer.

12.Use only with the cart stand,tripod, bracket or table specified by the manufacturer for sold with the
apparatus.When a cart or rack is used.Use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug the apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified personnel.Servicing is required when the apparatus has been damaged in anyway,such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus has been exposed to moisture,does not operate normally,or has been dropped.

15.CAUTION:These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock,do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

16.Do not install this equipment in a confined or building-in space such as a book case or similar unit.And remain a well ventilation conditions at open site. The ventliation should not be impeded by covering the ventilation openings with items such as newspaper,table-cloths,
curtains etc.

17.WARNING:Only use attachments/accessories specified or provided by the manufacturer(such as the exclusive supply adapter,battery etc)
18.WARNING:The mains plug is used as disconnect device,the disconnect device shall remain readily operable.

19.WARNING:To reduce the risk of fire or electric,do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids. Such as vases,shall not be placed on apparatus.

Caution

20.-This lighting flash with arrowhead symbol with in an equilateral triangles intended to alert the user to the presence of non-insulated”dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

-Warning: To reduce the risk of electric shock,do not remove cover(or back)as there are no user-serviceable parts inside.Refer servicing to qualified personnel.
-The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature a accompanying the appliance.

21. Warning: Please refer the information on exterior bottom enclosure for lectrical and safety information before installing or operating the apparatus.
Use the devices where the ambient temperature is between 00 and 350 (320 to 950 F). Low- or high-temperature conditions might cause the device to change its behavior to regulate its temperature.Using Android device in very cold conditions outside of its operating range might temporarily shorten battery life and could cause the device to turn off. Battery life will return to normal when you bring the device back to higher ambient temperatures. Using an the devices in very hot conditions can permanently shorten battery life.

In The Box:

In The Box

Buttons

1. Camera (Rear)
2. Camera (Front)
3. TF Card Slot
4. Earphones
5. Volume Control
6. Power On/Off
7. Reset
8. Speaker
9. Micro USB

Starting Your Tablet
1. Press and hold the Power button for 3 seconds. (If your tablet does not turn on, or instructs you to “Connect your charger”, connect the AC adapter and charge the unit.)

2. At the Start-up screen, slide your finger up to unlock.

Starting Your Tablet

3. Once you’ ve arrived at the Home screen, you can begin using your tablet.

Home Screen At-a-Glance

Home Screen At-a-Glance


1. Status Bar
2. Search Box
3. Walmart App Suite
4. Go Back
5. Home
6. Recents

Using the Cameras

Camera IconTap on the Camera Icon

Using Camera

1. Switch Cameras (Front/Rear)
2. Normal Mode
3. Recent Photo
4. Take Photo

Tablet Updates
To ensure the tablet runs smoothly it is recommended to perform periodic system software updates, especially during initial set up of the tablet. You may receive notifications (on the Lock screen) from time to time that software updates are available. Tap the notification to be directed to the update. Other options to access updates:

1. From the Home screen tap on Settings setting> System >
About Tablet >Wireless Update.

NOTE: To perform an update, you must be connected o WiFi.

Google Play Update
Google Play Update

The first time you sign on to Google Play Store, updates will automatically start downloading on to the tablet. The download icon will appear in the status bar at the top left of screen . Installing a new application while multiple apps are downloading will reduce tablet speed and performance. After all downloads and updates have been installed, the tablet will resume normal ope rating performance.

To view the progress of downloads working in the background, slide your finger down from the top edge of the screen.

Touching and Typing

Connecting to the Internet

Connecting to the Internet

In order to connect to the internet, you will need the following:
• A wireless router or an access point with a broadband internet connection.
• The name of your network (SSID), as well as the password or other credentials,
if your network is secure.

The wireless router must support WiFi 802.1 la/b/g/n connections.

Go to SETTINGS > Network & internet > WiFi Tap on WiFi to activate wireless connectivity. The Tablet will scan for available WiFi networks within range. Secured networks will require a password, Once you have successfully entered your information the tablet will remember your settings.

Connecting Bluetooth
Your Tablet is compatible with Bluetooth capable devices. Once your tablet searches
and finds the Bluetooth device, follow on-screen instructions to initiate the pairing of the device with the Tablet. Add or “pair” a Bluetooth compatible device with your Tablet as follows:

1 ) Turn on the compatible Bluetooth device and make it discover able.
2) Open the Settings > Connected devices.
3) Tap on Pair new device view available devices.
Connection Bluetooth

Charging Your Tablet
It is recommended to fully charge the tablet before first use . To charge the
tablet, plug the 1) USB cable into the AC adapter, and 2) attach the other end to the Micro-USB input on the tablet. 3) Plug the AC adapter in to a wall outlet.
Charging your Teblet

When the tablet is ON and cha rging, the battery icon will pulsate. A complete battery charge may take up to 2.5 hours. It is normal for the tablet to get warm while charging, playing high in tensity games, or streaming video.
Battery life will vary depending on usage.

Note: Leave tablet in well ventilated area while charging.

Important Safety Instructions
We would like you to have a safe and enjoyable experience.
Please read the following instructions and notices before using your tablet.

•Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.

• Avoid using the tablet in extremely hot, cold, dusty, damp or wet environments.

• The tablet is not moisture/water•resistant. Avoid using the tablet around sources of water, Avoid dropping or forcibly placing the tablet onto a hard surface. This may damage the screen or internal electronic components and void the warranty.

• Do not use alcohol, thinner or benzene to clean the surface of the tablet. Use only cleaning products designed for computer tablet devices.

• Do not use the tablet while walking or driving.

• Excessive use of earphones at high volume may lead to hearing impairment. Limit earphone usage, and adjust the volume to a moderate level when doing so.

• The images in this guide may vary slightly from the actual product.

• Charge the tablet battery under any of the following circumstances:

1. The battery level icon indicates low power, by showing a drained, red battery icon.

2. The tablet powers-off automatically, and continues to do so even after restarting.

3. On-screen keys do not work.

• Do not suddenly disconnect the tablet when formatting, uploading or downloading data. This can lead to
program errors (e.g., system or screen “freezing Static discharge is normal and can occur in an electronic device Although not life threatening, it may corrupt
files or damage memory and its content. Do not connect accessory attachments that are not from NuVisiom

• Dismantling the tablet will void the manufacturer* s warranty. If you are experiencing problems, review the Troubleshooting section of this manual.

• The tablet functions, hardware, software, and warranty information may be improved or modified by the manufacturer or their respective owners, and is subject to change without notice.

Certification Information

FCC

This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, incl uding interference that may cause undesired operation.

Certification

Questions about your Onn 8″ Tablet ? Post in the comments!
Download Onn 8″ Tablet Manual [PDF]

HGS iSteady Pro 3-Axis Stabilizing Gimbal User Manual

HGS iSteady Pro 3

3-Axis Handheld Stabilizing Gimbal For Action Camera

Product Overview

Product Overview

1. Thumb Screw
2. Tilt Motor
3. Pan Motor
4. 1/4 Inch Extension Screw Hole
5. Bluetooth Light
6. Hot Key
7. Roll Motor
8. Mode Light
9. Joystick
10. Mode Button
11. Turn ON/OFF
12. Handle (Battery inside)

⚫ Accessories List
-Micro USB Cable*1
-Tripod*1
-Carry Case*1
-User Manual (Includes warranty card) *1

1. Installation Instruction
Install the ‘Hohem Gimset’ App
Search for ‘Hohem Gimset’ in the App Store or Google Play,and install the app on your mobile phone.

Installation App
*‘Hohem Gimset’ supports iOS 9.0 and Android 8.0 or above

2.Stabilizer Charging& Action camera Charging
Fully charge the stabilizer before using it for the first time.Using the standard USB cable connecting to the stabilizer charging port (or other power sources)
a. USB Port: Power bank output(Charging the smartphone,action camera etc.)
b. Micro USB Port: Charging the gimbal, Upgrade firmware& Calibration

Charging& Action

a. 4 Led lights indicators
4 Led lights on means power is 100%
3 Led lights on means power is 75%
2 Led lights on means power is 50%
b. Indicator Light Fast Flashing: Charging status
c. Indicator Light Solid: Fully charged status

3.Install Action Camera
Please remove the action camera protective case and install the camera before turn on the gimbal.

Install Action Camera

4、Operation Instruction

Operation Instruction

Chart

5.APP Instruction
(1) Enable the Bluetooth on the smartphone
(2)Open the App, choose the model then confirm into Bluetooth connection. Bluetooth will be connected in the App automatically, no need to set in the smartphone setting)

More functions in the App
(Please confirm the Bluetooth is connected and the Bluetooth light is solid on)
1. Timelapse
2. Motion timelapse
3. Remote control:
A. Joystick: control the shooting direction of gimbal
B. One key to switch the work modes
C. One key to return and reverse
4. Personalized parameter setting:
A. Follow speed
B. Joystick speed
C. Following dead zone range
D. Motor torsion
5. Calibration and upgrade firmware

6. Parameter
Parameter

7.Calibration
⚫ If the gimbal has the following situations, please calibrate it:
① The pitch angle is not leveled with the horizontal surface.
② The roll angle is not parallel to the horizontal surface.
③ Under the lock mode, the panning angle drifting.
⚫ Calibration Operation Instruction :

Method 1:Off-line Calibration
(1) Power on the gimbal (around 3 seconds), long press the mode button over 6 seconds till the mode light is solid.
(2) Lay the gimbal on a static flat surface; make sure it has no shaking. Calibration is finish when the mode light is continuously flashing for 3 times.
(3) Power off the gimbal and restart it, if the calibration is unsuccessful, you can repeat step (1)(2) to reinitialize.

Method 2:6-Side Calibration Via App
Please ensure the stabilizer is connected with App via Bluetooth, then enter “Calibration” and follow the tips to calibrate in the App.
8、Firmware Upgrade
Please ensure the stabilizer is connected with App via Bluetooth, then enter the “Firmware Upgrade” and follow the tips to upgrade the latest firmware 9DISCLAIMER
Please install and use the product according to the manual!

Please reconfirm the gimbal and the action camera are well installed before power on! Keep the stabilizer away from fire and heat source!
Prohibit any user for any illegal purpose. Users will be responsible for all behavior of purchasing and using the products.

For any unknown sources or usage, we will not provide any service.
If there is any question, please contact the technician of Hohem Tech, we won’t be
responsible for any wrong operations by users. Hohem Tech reserves the right for final explanation.

chart-2

Federal Communication Commission (FCC) Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction Federal Communication Commission (FCC) Radiation Exposure Statement Power is so low that no RF exposure calculation is needed.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the nstructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Questions about your HGS iSteady Pro 3-Axis Stabilizing Gimbal ? Post in the comments!
Download HGS iSteady Pro 3-Axis Stabilizing Gimbal Manual [PDF]

Element LED TV E2SW5018 User Manual

LED TV E2SW5018

Element LED TV E2SW5018 User Manual

INSTRUCTION MANUAL
Please read all the instructions carefully before using this TV, and keep the manual for future reference.

IMPORTANT SAFETY INSTRUCTIONS
•Read these instructions – All the safety and operating instructions should be read before this product is operated.
•Keep these instructions – The safety and operating instructions should be retained for future reference.
•Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
•Follow all instructions – All operating and use instructions should be followed.
•Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like.
•Clean only with dry cloth.
•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
•Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
•Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
•Only use attachments/accessories specified by the manufacturer.
•Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Safety

•Unplug this apparatus during lightning storms or when unused for long periods of time.

•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
•Please keep the unit in a well-ventilated environment.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus should not be exposed to dripping or splashing. Objects filled with liquids, such as vases should not be placed on apparatus.

WARNING: The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

WARNING: The main plug is used as disconnect device, the disconnect device shall remain readily operable.

WARNING: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.

Caution

Arrohead SymbolThis lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

exclamation pointThe exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.

equipment MarkThis equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

HDMI
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc in the United States and other countries

ADDITIONAL SAFETY INFORMATION
To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below.
Electrical Safety
•The TV set should only be connected to a main power supply with voltage that matches the label at the rear of the product.
•To prevent overload, do not share the same power supply socket with too many other electronic components.
•Do not place any connecting wires where they may be stepped on or tripped over.
•Do not place heavy items on them, which may damage the leads.
•Hold the main plug, not the wires, when removing from a socket.
•During a thunderstorm, or when not using the television for extended period of time, turn off the power switch on the back of the television.
•Do not allow water or moisture to enter the TV or power adapter. Do NOT use in wet, moist areas, such as bathrooms, steamy kitchens or near swimming pools.
•Pull the plug out immediately, and seek professional help if the main plug or cable is damaged, liquid is spilt onto the set, if accidentally exposed to water or moisture, if anything accidentally penetrates the ventilation slots or if the set does not work normally.
•Do not remove the safety covers. There are no user serviceable parts inside. Trying to service the unit yourself is dangerous and may invalidate the product’s warranty. Qualified personnel must only service this apparatus.
•To avoid battery leakage, remove exhausted batteries from the remote control, or when not using for long period.
•Do not break open or throw exhausted batteries on a fire.
•Do not mix old and new batteries.
•Do not mix Alkaline,Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmium) or (Nickel Metal Hydride) batteries.
Physical Safety
•Do not block ventilation slots in the back cover. You may place the TV in a cabinet, but ensure at least 5cm (2”) clearance all around.
•Do not tap or shake the TV screen, or you may damage the internal circuits. Take good care of the remote control.

To clean the TV use a soft dry cloth. Do not use solvents or petroleum based fluids.
•Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.
•Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, the wide blade, or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
•Protect the power cord from being walked on or pinched particularly at plugs.
•Unplug the apparatus during lightning storms or when unused for long periods.
•Refer all servicing to a qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled, or objects have fallen into the apparatus, has been exposed to rain or moisture, does not operate normally, or has been dropped.
•Please always connect your television to a power outlet with protective groud connection.

What is Included?

What is Included

Front View
Front View

switchSwitch the TV between On / Standby mode.
• CH +/- Press to select a channel.
• VOL +/- Press to adjust the volume.
• LED The LED light indicates when the TV is activated.
• IR Infrared Receiver.

Rear View

Rear View

Wall Mounting
WARNING
Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

– Using cabinets or stands recommended by the manufacturer of the television set.

– Ensuring the television set is not overhanging the edge of the supporting furniture.

– Not placing the television set on tall furniture(for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.

– Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture.

– Educating children about the dangers of climbing on furniture to reach the television set or its controls.If your existing television set is being retained and relocated, the same considerations as above should be applied.

Note: Your new TV is heavy, please consult with professional wall mount installer to perform this installation.

PREPARATIONS

Remote Control
Remote Control
Remote Discriptions

CONNECTING EXTERNAL DEVICES

CONNECTING EXTERNAL DEVICES

Turning On/Off Your TV
• Connect the power cord to the power socket after you have completed all the physical connections. At this stage, the TV will enter Standby Mode and the red LED indicator will illuminate.
• In Standby Mode, press the switch button on the main unit or on the remote control to turn the TV on. The red LED indicator will turn blue.

Note: The POWER button on the main unit or on the remote control can only switch the TV into standby. To completely turn off the TV, please disconnect the power cord from the power socket.

Initial Setup
•The first time you turn the TV on, it will go into the Setup Wizard. Press the Arrow buttons to highlight and select your desired mode and press OK to confirm.

Initial Setup

Initial Setup 4-5

Initial Setup 5

CUSTOMIZING TV SETTINGS
Source
• Press SOURCE on the remote control or on the main unit to display the source menu, then use the Arrow buttons to cycle among the different input sources:

TV/AV/COMPONENT/HDMI/VGA/USB, then use the Arrow buttons to highlight the desired source and press OK to confirm.

Source

Channel Selection
•Press the CH /CH buttons on the main unit or on the remote control repeatedly to select the channel.
•Press the 0-9 buttons on the remote control to select the channel directly.

Press “4”, and then press OK button to select channel 4.
Press “4” and “5”, and then press OK button to select channel 45.
Press “1”, “2” and “3”, and then press OK button to select channel 123.

Volume Adjustment
•Press the VOL+/- buttons on the main unit or on the remote control to adjust the volume.

•If you wish to switch the sound off, press the MUTE button again or the VOL+ button to resume the sound.

CUSTOMIZING TV SETTINGS
Streaming
Streaming

•Press MENU button on the main unit or on the remote to display the main interface. Then use the Arrow buttons to select STREAMING and press OK to enter. Use the Arrow buttons to select the desired APP and press OK button to view. Or press the hotkey on the remote control to enter the desired APP directly. For full listing of available Apps, please visit elementelectronics.com.

NETFLIX
Enjoys TV shows & movies streamed instantly over the Internet.

YouTube
YouTube your way on the best screen in your house.

VUDU
Discover, watch and collect the latest movies and TV shows in high quality 1080p. Free to sign up. No subscriptions, late fees or commitments.

Pandora
Free personalized radio that offers effortless and endless music enjoyment and discovery. Just start with the name of one of your favorite artists, songs, genres or composers and Pandora will do the rest. It’s easy to create personalized stations that play only music you’ll love.

AccuWeather
Displays the current weather conditions and the temperature anywhere in the world in centigrade or Fahrenheit.

CUSTOMIZING TV SETTINGS
Media
Media
•Press MENU button to display the main interface, then use the Arrow buttons to highlight MY MEDIA and press OK to confirm. Select among Photos, Music and Video to view what you like.

Note: Portable drives should be inserted before entering MY MEDIA menu.

Viewing Photos
Viewing Photos
•After entering the picture file, use the Arrow buttons to select the desired picture, then press the to display. When the picture is playing, the picture Function Bar will be displayed. Use the Arrow buttons to select the desired function available on the bar.

CUSTOMIZING TV SETTINGS

TV Settings
TV Settings

•Press the MENU button on the main unit or on the remote control to display the main interface. Then use the Arrow buttons to highlight TV Settings and press OK to enter. Then use the Arrow buttons to cycle among the following options and select the desired one to enter.

General
General
General

Picture Settings
Picture Settings

Audio TV seting

Channel Time setting
Look App setting

Look App setting
Press the MENU button on the main unit or on the remote control and then press the buttons to select LOCK menu. Use the 0-9 buttons to input 4-digit password to enter the LOCK menu. If used, this option feature can “block” undesirable programming from appearing on the TV. Parental Control offers the user a wide variety of options and settings that restrict or “block” the programming that can appear on the TV. Parental Control allows the user the capability of defining which program rating they consider acceptable to the younger more sensitive viewer. It can be preset and turned either on or off by the user who specifies the secret 4-number code, the password. The number of hours blocked are specified. General audiences and children blocks should be both programmed into the TV’s memory. Viewer ratings are specified for both TV and the motion picture Industry; both rating systems should be used, for complete coverage. The ratings are based on the ages of children.

Overview
To ensure complete coverage for all TV programs, (movies and regular TV shows) choose a rating for MPAA, from the selections below,as well as ratings from the TV Parental Guidelines Rating Systems below, using the Age Block option for General Audiences, and for children. In addition to those, you may wish to add additional restrictions from the content block menu, and submenus examples below.
Things to Consider before Setting up Parental Control
Determine which rating you consider acceptable to the viewer. (For example,if you choose TV-PG, more restrictive ratings will be automatically blocked; the viewer will not be able to see: TV-PG,TV-14,or TV-MA rated programming.) Do you want to block the auxiliary video source entirely? (Blocks the signal sent by the equipment, such as VCR, connected to the TV Audio/VIdeo Input Jacks) Or leave unblocked, then choose allowable ratings. Block program “Content” based on individual parameters such as: Strong Dialog, Bad Language, Sex Scenes,Violence Scenes, or Fantasy. Violent Scenes; in Content Blk option. Select a secret password, in the Set Password option, using the numbers keys on the remote control.Do not forget the password, it is the only way you can access the Parental Control menu and change rating selections, or turn Parental Control off.Do you want the Parental Control to be active at all times? If not, you can turn it on or off with the Lock On/Off option.

•You can set different Parental Control viewing restrictions for general audiences and for children, both can be active at the same time.
•Simply specifying one content block such as Sex Scenes, will not automatically restrict the programming that appears from the video sources.
•Even If you choose to leave the AUX Inputs unblocked, the ratings you specify will automatically restrict the programming that appears from the video sources.
•You can not disable Parental Control by disconnecting the TV from power. Block hours will be automatically reset to the original block time setting specified if power is disconnected.

Motion Picture
If your TV does not operate normally or cannot be turned on, please check the following troubleshooting questions. Remember also to check any other connected electronic device, such as DVD or blu-ray player to pinpoint the problem. If the TV still fails to operate normally, please contact technical support (Refer to Warraty page).

SYMPTOM
POSSIBLE CAUSE
REMEDY
Dead. No LED lit
No power to the TV.
•Check all connections to the TV’s AC socket.
Dead. No LED lit red
Set in standby mode.
•Press either the Power button or the Standby button on the remote control.
Blue screen
No signal.
•Press the SOURCE button to select the correct source.
Incorrect
source selected.
Noisy, snowy, ghosting picture (TV)
Poor antenna signal.
•If using an indoor antenna, try adjusting the antenna position. Check antenna connections.
No sound
Sound “Mute”.
•Turn sound “Mute” off.
Volume set too low.
•Check volume settings.
External leads
not connected “if used”.

Check that all external leads are connected properly.
PASSWORD
Lost password
Select the SET Password setting in the LOCK menu, then
enter the following master password “8899”. The master
password clears your previous password and allows you to
enter a new password.
25
Before contacting the service technician, perform the following simple checks. If any problem still persists, unplug the LED TV and call for assistance.
PROBLEM
POSSIBLE SOLUTIONS
No sound and picture
•Check that the main plug has been connected to a wall outlet.
•Check that you have pressed the POWER on the front of the TV set.
•Check the picture contrast and the brightness setting.
Red LED indicator lights
•Set in standby mode. Press either the Power button or the Standby button on the remote control.
Normal picture but no sound
•Check the volume.
•Sound muted? Press the MUTE button.
•Try another channel, the problem may be with the broadcast.
•Are the audio cables installed properly?
The remote control does not work
•Check to see if there are any objects between the TV and remote control causing obstruction.
•Are batteries installed with correct polarity (+/-)?
•Correct remote operating mode set: TV, VCR, etc?
•Install new batteries.
Power suddenly turns off
•Is the sleep timer set?
•Check the power connection, power may be interrupted.
•No broadcast on the station tuned.
Picture appears slowly after switching on
•This is normal, the image is muted during the product start up process. Please contact a service provider if the picture has not appeared after 5 minutes.
Poor color or picture
•Adjust the color in Menu option.
•Keep a sufficient distance between the product and the VCR.
•Try another channel, the problem may be with the broadcast.
•Are the VIDEO cables installed properly?
•Activate any function to restore the brightness of the picture.
Horizontal/vertical bars or picture shaking
•Check for local interference, such as an electrical appliance or power tool.
Blue screen
•Press the SOURCE button to select correct source.
Poor reception on
some channels
•Station or cable experiencing problems. Tune to another station.
•Station signal is weak, reorient antenna for better reception.
•Check for sources of possible interference.
Lines or streaks in pictures
•Check the antenna (change the direction of the antenna).
No output from one of the speakers
•Adjust balance in the Menu option.
TROUBLESHOOTING
26
TROUBLESHOOTING
Note: When there is a problem in VGA mode ( only when VGA mode is applied).
PROBLEM
POSSIBLE SOLUTIONS
The signal is out of range
•Adjust resolution, horizontal or vertical frequency.
•Check whether the signal cable is connected or loose.
•Check the input source.
Vertical bar or strip on the background, horizontal noise and incorrect position
•Set the auto configure or adjust clock, phase, or H/V position.
Screen color is unstable or is a single color
•Check the signal cable.
•Reinstall the PC video card.
Maintenance
Early malfunction can be prevented. Careful and regular cleaning can extend the amount of time you will have with your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Do not use your TV in areas that are too hot or too cold, because the cabinet may warp or the screen may malfunction. Your TV works best in temperatures that are comfortable to you.
Storage temperatures are 32° to 122°F(0° to 50°C).
Working temperatures are 32° to 95°F(0° to 35°C).
Do not place your TV in direct sunlight or near a heat source.
-minimum 5cm distances around the apparatus for sufficient ventilation;
-the ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.;
-no naked flame sources, such as lighted candles, should be placed on the apparatus;
-attention should be drawn to the environmental aspects of battery disposal. Clean the screen A great tip to dust off your screen: wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use to wipe the screen.  Make sure the excess water is off the screen, then let air-dry before you turn on the TV.

Cleaning the cabinet To remove dirt or dust, wipe the cabinet with a soft, dry, line-free cloth. Please be sure not to use a wet cloth.

FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Changes or not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not.

Questions about your Element LED TV E2SW5018 ? Post in the comments!
Download Element LED TV E2SW5018 Manual [PDF]

Enacfire E18 User Manual

Enacfire E18

Enacfire E18 User Manual

In the Box:
1 X Bluetooth Earphone
1X User Manual

Earphone Controls:

Earphone Controls

A:Next Song/Volume UP
B: Power ON/OFF Press once to Play or Pause music and to answer incoming calls Press twice to Redial last call Long press to refuse a incoming call
C: Previous Song/Volume Down

Charge the Earphone
Your Earphone uses a rechargeable battery. You must charge the battery fully before using the Earphone for the first time.
1. Plug the charging cable into the Micro USB charging port.
2. The red indicator remains on while charging.
3. Full charge takes 2.5 hours.
4. The blue indicator turns on when charging has completed.

Pairing Steps:
1. Press and hold (B) to turn on, the indicator light will alternate red and blue indicating the Earphone are in pairing mode.
2. Open the Bluetooth setting on your mobile device and connect to the TE0547. If prompted for a password, enter 0000.

Specifications:
1. Bluetooth version: 4.2
2. Speaker specification: 16ohm 5mW x 2
3. Frequency response: 20-20KHZ
4. Supports Bluetooth Earphone and Hands-free
5. Operating Distance: about 10 meters
6. Battery capacity:70mAh x 2
7. Charging MicroUSB port
8. Charging time:2.5hours
9. Play time:6hours when 80% sound volume

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Questions about your Enacfire E18 User Manual ? Post in the comments!
Download Enacfire E18 User Manual Manual [PDF]

JBL Flip 4 User Manual [Bluetooth Speaker]

JBL Flip 4

JBL Flip 4 User Manual [Bluetooth Speaker]

1. What’s in the Box

What's in the Box

2. Buttons

Buttons

3. Connection
Connection

4. Bluetooth

4.1 Bluetooth Connection.

Bluetooth Connection

4.2 Music Control
Music Control

4.3 Speakerphone
Speakerphone

5. Voice Assistant
Tap “Voice Assistant’ in the JBL Connect app, to make the “Forward Button” button as the activation key of Sid or Google Now on your phone.

Voice Assistant

Press the “Forward Button” button on the speaker to activate Sid or Google Now on your phone. Please make sure the Sid or Google Now is enabled on your phone.

Activ Siri

6. JBL Connect
Wirelessly Link 100+ JBL Connect+ Speakers Together.

JBL Connect

Play music on one of you JBL speakers and then press the JBL Connect+ button on all desired speakers to start pairing. Al the other JBL speakers will play same music from the music source.

Download JBL App

Download the JBL Connect app for the following features: stereo setup, firmware upgrade, and device renaming.

JBL Connect+
JBL Connect+

7. LED Behavior

LED Behavior

Warning
warning

JBL Flip 4 is IPX7 waterproof.
IMPORTANT: To ensure that the JBL Flip 4 is waterproof, please remove all cable connections and tightly close the cap; exposing the JBL Flip 4 to liquids without doing so may result in permanent damage to the speaker. And do not expose JBL Rip 4 to water while charging, as doing so may result In permanent damage to the speaker or power source.

IPX7 waterproof is defined as the speaker can be immersed in water up to lm for up to 30 minutes.

Specification

• Bluetooth version: 4.2
• Support: A2DP V1.3, AVRCP 41.6, HFP V1.6, HSP V1.2
• Transducer 2 x 40mm
• Output power: 2 x 8W
• Frequency response: 70Hz – 20KHz
• Signal-to-noise ratio: z80dB
• Battery type: Lithium ion polymer (3.70, 3000mAh)
• Battery change time: 3.5 hour @ 5V1A
• Music playing time: up to 12 hours (varies by volume level and audio content)
• Bluetooth transmitter power: 0- 9dBm
• Bluetooth transmitter frequency range: 2.402 – 2.480GHz
• Bluetooth transmitter modulation: GFSK, rr./4-DOPSK, 8DPSK
• Dimensions (H x W x D): 68 x 175 x 70 (mm)
• Weight: 515g

Bluetooth
The BLUETOOTH word mark and logos ere registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated Is under license. Other trademarks and trade names are those of their respective owners.

Questions about your JBL-Flip-4? Post in the comments!
Download JBL-Flip-4 Manual [PDF]

VeryFitPro User Manual [ID115U HR Smart Bracelet]

ID115U HR Smart Bracelet

VeryFitPro User Manual [ID115U HR Smart Bracelet]

Working Condition for Mobile

Working Condition for Mobile

Quick Start Guide
1. Download VeryFitPro app
The smart band need to pair with the smalt phone through app. Before downloading, please refer to working condition for mobile. Way to download 1: Searching the QR code, scan and download app.

Please use the QR code Scan tool to scan the following QR code and open the link and download app. In case there is any problem to open the link, please try to copy the link and open it by browser.

Way to download 2: Search in the phone market and download.
Please search and download the “VeryFitPro” from App Store or Google play store.

QR Code

2. Device Activate & Charge
Make sure power is working normally before initial use. In case device is under low battery, connect the device to the charger. Device will automatically boot up (please connect the USB in normal DC pott (5V-500mA) for charging as below. The host should be separated from the strap when charging).

Device Active and Charge

3. Pair the device
Open pair device in the app, please make sure the Bluetooth is ON when pair the device. When searching and pairing device, please long press on the screen of the device and activate the device (light on). App will search the device automatically, choose the device name and connect the device to the app.

How to Use
Key Definitions:
Tap: Function Switch
Long Press: active, Mode Switch

How to Use

Once the device connected to the app successfully, it will record and analyze your activities and sleep automatically, Touch the click toggle, the display order is as follows
Normal Mode

Remote Camera

Notification Mode instruction :
1.Under incoming call, message notify mode, the screen will still display the
last time text and sliding, when there is a new notification coming in.
2. If there is a call or message come, the device will force into call/message alert mode no matter under whatever other mode, after quit, it returns to previous mode.

Functions Instruction
Activities Record: Record daily activities, you could check daily activities including steps, distance and calorie consumption in the app; Sleep Monitoring: Device could automatically recognize your state and monitoring the whole sleep progress with analyzing the deep sleep and light sleep hours; Notification Alerts: Alarm alert, call alert, sedentary alert, etc. by silent vibration; Anti-Lost: When the smart phone is beyond the Bluetooth range (5m), the device vibrates to remind. Remote Camera Control: Operation on the semen could control remote photograph shooting. Heart Rate Monitoring: Device monitors your heart rate status and help 11.r make suitable exercise plan. Device Data Storage: The activity data will be cleared every O:OOam as a cycle, but the device itself could restore 7 days’ data, after 7 days, the data will be cleared. We suggest user to sync data with app at least one time within 7 days during use.

FAQ
Can’t find device when pairing device?
Please make sum the smart phone Bluetooth is ON and smart phone OS Android 4.4 & above and iOS 7.1 & above. Please make sure the device is near the smart phone when pairing (normal 0.5m) and among the normal Bluetooth communication distance range (within 10w). Please make sure the device is not under low battery. If there is still problem after full charge, please contact us.

Can’t connect the device with app?
Some smart phone Bluetooth service will be abnormal when reboot. Please reboot the Bluetooth or reboot smart phone for pairing device.

How to Restore Factory Defaults
Make sure the device is connected with app, go in the app, enter
“Mine-SystemSetting” and choose “Reboot Device”.

How to update the device
Make sure the device is connected with app, go in the app “Device –
Device update”, please wait some minutes before update done.

Basic Specifications
Model: IDI 15U HR
CPU: Nordic
Sensor: Kionix
HR Sensor: Silicon Labs
Host Weight: I Sg
Battery Type: Li-ion Polymer Battery
Battery Capacity: 45mAh
Data Sync: Bluetooth 4.0
Working Temperature: -IOC – 45 C
Dustproof and Waterproof level: IP67
Standby: more than 7 days
Frequency bands: 2402-2480MHz
Maximum output power: 3.65dBm

This product is applied with professional Bluetooth RF signal and self developed algorithm, the accuracy of step pedometer could be up to 95%. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular
installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to tlY to conect the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS

Correct Disposal of this product. This marking indicates that this product should not be dispose other household wastes throughout the EU. To prevent possible harm to the environment or human he from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Questions about your ID115U HR Smart Bracelet ? Post in the comments!
Download ID115U HR Smart Bracelet Manual [PDF]

JBL Endurance Sprint User Manual

JBL Endurance Sprint

JBL Endurance Sprint User Manual

Quick Start Guide:
1. What in the Box…

What in the Box

2. Select your Size….

3. Attached AIR TIP Enhancers
Attached AIR TIP Enhancers

4. TWIST LOCK TECHNOLOGY.
TWIST LOCK TECHNOLOGY

5. Water Proof.

TWIST LOCK TECHNOLOGY

Water Proof....

6. MAGHOOK

MAGHOOK

7. Touch Button Command

Touch Button Command

Control

8. POWER / PAIR / CHARGE

If connecting for the first time, The headphone will enter pairing mode automatically after it is power on.

Power pair charge

Power off

Paring New Device

Charging Port

9. LED BEHAVIOR

LED BEHAVIOR

• Transducer: 10mm
• Frequency response: 20Hz-20kHz
• Signal-to-noise ratio: 85dB
• Maximum SPL: [email protected] Hz
• Sensitivity ©1 kHz dBFS/pa: -20dB
• Impedance: 16ohm
• Bluetooth Max Output Power: 4dBm
• Bluetooth transmitter modulation: GFSK, n/4DOPSK,8DPSK
• Bluetooth transmitter frequency range: 2.402GHz-2.48GHz
• Bluetooth profile: HFP V1.6, A2DP V1.3, AVRCP V1.5
• Bluetooth version: V4.2
• Battery type: Lithium-ion polymer (3.7V, 120mAh)
• Charging Time: 2H
• Play time with Bluetooth on: 8H
• Talk time with RI latnnth nn. OH

Anatel

Bluetooth
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of the respective owners.

Questions about your JBL-Endurance-Sprint ? Post in the comments!
Download JBL-Endurance-Sprint Manual [PDF]

ID130HR / ID130 User Manual

ID130HR

Fitness Tracker User Manual

ID130HR / ID130

Thank you for purchasing our products. This manual addresses the safety guidelines, warranty and operating instructions. Please review this manual thoroughly before operating your device.

SAFETY AND WARRANTY
Important Safety Instructions

The device contains electrical equipment that may cause injury if not used properly. For example, prolonged contact may contribute to skin allergies for some users. To reduce irritation, please read the safety guidelines on the following pages to ensure proper use and care.
● Do not expose your device to liquid, moisture, humidity or rain while charging; do not charge your device when it is wet, as it may result in electric shock and injury.
● Keep your device clean and dry. Do not use abrasive cleaners to clean your device.
● Consult your doctor before use if you have any preexisting conditions that might be affected by using this device.
● Don’t wear it too tight. If your device feels hot or warm, or if it causes any skin irritation or discomfort, please discontinue using your device and consult your doctor.
● Do not expose your fitness tracker to extremely high or low temperatures.
● Do not leave your fitness tracker near open flames such as cooking stoves, candles, or fireplaces.
● This product is NOT a toy – never allow children or pet to play with this product. Always store the product out of reach from children. The devices themselves or the many small parts they contain may cause choking if ingested.
● Never try to abuse, crush, open, repair or disassemble this device. Doing so will void the warranty and can result in a safety hazard.
● If any parts of your product require replacement for any reason, including normal wear and tear or breakage, please contact us.
● Do not use your device in a sauna or steam room.
● Do not bring your device into contact with any sharp objects, as this could cause scratches and damages.
● For light colored arm bands, minimize direct contact with dark-colored clothing, as color transfer could occur.
● Dispose of this device, the device’s battery and its package in accordance with local regulations.
● Don’t not check any notifications, GPS, or any information on your device’s display while driving or in other situations where distractions could cause injury or hazardous. Always be aware of your surroundings while exercising.

Battery Warnings
A lithium-ion battery is used in this device. If these guidelines
are not followed, batteries may experience a shortened life
span or may cause fire, chemical burn, electrolyte leak, and/or
injury.
● Do NOT disassemble, modify, re manufacture, puncture or damage the device or batteries.
● Do NOT remove or attempt to remove the non-user-replaceable battery.
● Do NOT expose the device or batteries to fire, explosion, or other hazard.

Health Warnings
● If you have a pacemaker or other internal electronic device, consult your physician before using a heart rate monitor.
● The optical wrist heart rate monitor emits green light and flashes occasionally. Consult your physician if you have epilepsy or are sensitive to flashing lights.
● Always consult your physician before beginning or modifying any exercise program.
● The device, accessories, heart rate monitor, and related data are intended to be used only for recreational purposes and not for medical purposes, and are not intended to diagnose, monitor, treat, cure, or prevent any disease or condition.
● The heart rate readings are for reference only, and no responsibility is accepted for the consequences of any erroneous readings.

While the optical wrist heart rate monitor technology typically provides the best estimate of a user’s heart rate, there are inherent limitations with the technology that may cause some of the heart rate readings to be inaccurate under certain circumstances, including the user’s physical characteristics, fit of the device, and type and intensity of activity.
● The activity tracker relies on sensors that track your movement and other metrics. The data and information provided by these devices is intended to be a close estimation of your activity and metrics tracked, but may not be completely accurate, including step, sleep, distance, heart rate, and calorie data.
● If you have eczema, allergies or asthma, you may be more likely to experience a skin irritation or allergy from a wearable device.
● Whether you have the conditions above or not, if you start to experience any discomfort or skin irritation on your wrist, remove your device. If symptoms persist longer than 2-3 days of not using your device, contact your doctor.
● If you sweat for more than two hours while wearing your fitness tracker, be sure to clean and dry your band and your wrist to avoid skin irritation.
● Prolonged rubbing and pressure may irritate the skin, so give your wrist a break by removing the band for an hour after extended wear.

Maintenance
● Regularly clean your wrist and the fitness tracker, especially after sweating in the exercise or being exposed to substances such as soap or detergent which may attach on the internal side of the tracker.
● Do NOT wash the fitness tracker with household cleanser. Please use soapless detergent, rinse thoroughly and wipe with a piece of soft towel or napkin.
● While the fitness tracker is water resistant, it’s not good for your skin to wear a wet band.
● If your bands get wet—like after sweating or showering—clean and dry them thoroughly before putting them back on your wrist.
● Be sure your skin is dry before you put your bands back on.

Warranty
We strives to build our products with the highest attention to detail and craftsmanship. However, sometimes there are occurrences of defect.

We are happy to offer 1-year hassle-free warranty to all our devices as we continue to make amazing products. Please contact us if you have any questions about our devices.

Please charge your new device for 10 minutes before initial use.
Charging Device

Note:
If the charging red indicator is not on when you plug the device in a USB port for charging, check the direction of the device’s charging plug and move to the correct direction. Make sure the pins on the charging plug contact the pins in the USB port.

System Requirement (Smart Phone Only)
• iOS 7.1 & above
• Android 4.4 & above
• Bluetooth 4.0 & above

Quick Start Guide
1. Download “VeryFitPro” APP for Android and iOS Smart Phones

Option 1: Search for “VeryFitPro” in APP store or Google Play. Once APP is located, please download and install it to your smart phone.

Notes:
1) This fitness device is for iOS 7.1 & above or Android 4.4 & above. Please refer to the operate system above for device compatibility.
2) “VeryFitPro” APP is only compatible with smart phones.Option 2: Scan QR code to search for the APP. Use a QR scanner to search for the “VeryFitPro” APP in the APP store or Google Play.

Tip: If you are having trouble locating the APP, copy the link

Download App

2. Charging
For optimal binding and function of your device, please make sure your device has been charged for at least 10 minutes before initial use.

Note: The device is fully charged after 1 hour.

Charging: remove the host from the wrist band by gently pulling the band out of the host; connect the device host to a normal DC USB port (5V-500mA).
Charging With USB

Note:
1) The fitness trackers screen needs to be awake (tap the touch key to light the screen) to bind with your smart phone. If bind failed, wake up your tracker and restart device search.
2) If you unbind the device under Bluetooth connected state, the APP will set the settings back to default and all the data on device will be cleared. If you unbind the device under Bluetooth disconnected state, the APP will set the settings back to default, but the data on device will not be cleared.
3) The device can only link to one Bluetooth device at a time. During connecting please confirm there is no other Bluetooth devices nearby.

How to Use
Once the device is connected to the APP successfully, it will record and analyze your activities and sleeps automatically, as well as monitor heart rate status. Please tap the touch key on the device’s screen:

Using Display

Using Sports

Notification Feature Instruction
When a call or message comes in, the device will enter call/message alert mode. After the alert, it will go back to the previous mode.

Functions Instructions
Activities Record:
Record daily activities. You can check daily activity data including steps, distance and calorie burned on the APP.

Sleep Monitor:
Device can automatically recognize your state and monitoring the whole sleep progress with deep sleep, light sleep and awake sleep hours record.

Notification Alerts:
Alarm alert, call alert, sedentary alert, etc. with silent vibration.

Remote Camera Control:
Use the tracker to control smartphone shooting photos.

Heart Rate Monitoring (for ID130HR):
Monitor your heart rate status and help you make proper exercise plan.

Device Data Storage:
Activity data will be cleared at every 0:00am as a cycle, but the device itself can restore 7 days’ data; after 7 days, the data will be cleared. We suggest users to sync data with APP at least once within 7 days during use. (Synchronize Data Method: In connected state, go to Mainpage in the APP, and swipe down the screen to synchronize data to the APP.)

FAQ’s

Charge the device
Make sure the direction of the device’s USB plug is correct when plugging into the USB port for charging. For correct charging, the device’s red indicator turns on and will be off when the device has been fully charged.

Warm tips: Please remove the device host from the power supply once fully charged. Prolonged charging may shorten the battery’s life.

Pairing
1) Make sure the Bluetooth of your smartphone is ON.
2) Make sure the distance between your smartphone and the device is within 0.5 meter.
3) Make sure the “VeryFitPro” APP is trusted by your smartphone
by going to your smartphone system Settings, finding
“VeryFitPro” APP and enabling the Location and all Notifications.
(Specific setting methods may vary according to different
smartphones.
4) Make sure the fitness tracker is under unbind status before
pairing.
5) Open “VeryFitPro” APP on your smartphone and tap “Device” →
“Bind device”, then your smartphone starts searching devices. Select “ID130” or “ID130HR” in the list of found devices, and tap “ID130” or “ID130HR” to connect the device to your smartphone.
6) If you failed search the device, reboot your smartphone and Bluetooth to search it again.

Notes:
For iOS smartphones, if you failed to find “ID130” or “ID130HR” in
the APP, take the following steps:
a) Go to your smartphone “Settings” → “Bluetooth”. Under “MY
DEVICES”, find “ID130” or “ID130HR”, tap ” ” → “Forget This
Device” and turn off Bluetooth.
b) Reboot smartphone and open the “VeryFitPro” APP. When asked
whether to turn on the Bluetooth switch, click OK to search and
bind your device. Receive SMS/Calls notifications Calls/SMS notification function works when the device connects to your smartphone via APP. Please kindly refer to the following tips:
1) Go to your smartphone system Settings, find “VeryFitPro” APP and enable the Location and all Notifications. (Specific setting methods may vary according to different smartphones.
2) Turn Bluetooth on and go to the “VeryFitPro” APP to bind the device.
3) Switch “Call/SNS Alert” function on, and click ” √ ” to save your settings.

Count steps
Regarding the step counting, this fitness tracker has a built-in 3D sensor. It registers your steps when you swing your arm. Sometimes the data on device may displayed a little delayed. And it will reset itself if you walk continuously less than 10 steps. To test the accuracy of the pedometer, please walk casually and continuously up to 100 steps or more.

Measure heart rate (ID130HR version)
Make sure the wrist band sits neatly on your wrist before use.
Tap the touch key to go to the heart rate mode and wait for
10~20s to detect the heart rate.
Connect to the smartphone
The device will disconnect from your smartphone in the following
cases:
1) Smartphone Bluetooth was off or exceed normal Bluetooth
connection distance range (The normal Bluetooth connection
distance is within 10 meters, it can easily be reduced by walls
or furniture, etc.
2) The “VeryFitPro” APP was ended in phone background
process.
To reconnect the device to your smartphone, please kindly
refer to the following tips:
a) Go to your smartphone system Settings, find “VeryFitPro”
APP and enable the Location and all Notifications. (Specific
setting methods may vary according to different
smartphones.)
b) Clear all running/background processes in your
smartphone, go to “VeryFitPro” APP, and swipe down
Mainpage, then the device will reconnect to your
smartphone and refresh data.
You can also restart you smartphone and Bluetooth, then rebind
the device on APP.
Sync your tracker data to APP
To sync your tracker data to “VeryFitPro” APP, go to “VeryFitPro”
APP and swipe down Mainpage under connected state.
Sleep monitor
For the sleep monitoring function, please refer to tips as below:
1) The tracker automatically monitors your sleeping once it
supported with enough power (please make sure the wrist
band sits closely on your wrist before use). It decides your
sleeping status based on your wrist action or body movement.
The tracker only records the last period of your sleep that is
over 2 hours from 0:00 to 24:00).
2) The sleeping data is also related to your personal info, so
please make sure your personal info on your APP is updated.
(Steps: Go to “VeryFitPro” APP → “User” → “My info”)
3) Synchronize sleep data to the APP. (Steps: under connected
status, go to Mainpage in the APP, and swipe down the
screen to synchronize data to the APP).

Water proof
The tracker is splash waterproof (IP67), you can wash your
hands without taking it off, but do not shower or swim with it.
Wrist sense
When you turn over your wrist slowly by 90 degrees, the device
screen will be on.
Turn on this function by going to the APP → “Device” → “Wrist
sense”.
Find phone
To turn on this function, make sure the tracker is connected to
your smartphone, enter the APP, go to “Device” → “More” →
“Find Phone”, and turn it on. To use this function, tap the device
touch key to go to the mode “Find phone”, tap the touch key for
3 seconds, then your phone will ring / vibrate (if your
smartphone is set mute, it only vibrates once and stops).
Battery
The working time of the tracker is 5~7 days (the working time of
the tracker with heart rate monitor might be shorter). The actual
working time of the tracker is up to how often you use the
tracker
Device display mode
You may set the device display horizontally or vertically (Steps:
go to the APP → “Device” → “More” → “Display Mode”).
Dim screen
The screen is made from OLED material, so you need to shade
it with your hand in the sunshine or daylight to see more clearly.
Warranty
We offer 12-month warranty on this item. For any question,
please contact seller in time.
Not a medical use
This product is not a medical device, and is not intended to
diagnose, treat, cure, or prevent any disease. The accuracy of
our devices is not intended to match medical devices or
scientific measurement devices, but is intended to give you the
best information available in a wearable activity tracker.

Basic Specifications:
CPU: Nordic
Sensor: Kionix
HR Sensor (ID130HR): Silicon labs Si1142
Host Weight: 19g
Battery Type: Polymer Rechargeable Li Battery
Battery Capacity: 45mAh
Data Sync: Bluetooth 4.0
Working Temperature: -20℃~40℃
Dustproof and Waterproof level: IP67
Working time: approx. 7 days

Questions about your ID130HR / ID130 User Manual ? Post in the comments!
Download ID130HR / ID130 User Manual [PDF]

ID115 Smart Bracelet User Manual & App

ID115 Smart Bracelet

ID115 Smart Bracelet User Manual & App

Highlights:
Veryfit 2.0 APP is stable and easy to understand
Sensitive touchable screen
Bluetooth 4.0 technology – power saver
Fashionable style (slim / light / comfortable, it is made for wearing)

Main functions:
Pedometer, sleeping tracking (can track your sleeping quality automatically), calories counter, time / date display, drinking reminding, sedentary reminding, calling & SMS notifications etc.

This device doesn’t work with Windows system mobiles!!!

The APP won’t work if your cellphone screen size is less than 4.5’’ inches

What should we do if we use iPad or Android tablets? Please install the
APP in your iPad or Android tablet pc, use Bluetooth function to pair with the
APP to sync data, sync time / date and other activities data. As long as your
iPad / tablet pc supports Bluetooth function, there is no issue to use Veryfit 2.0
APP.

Compatibility:
Android 4.5 and above version iOS 8.0 and above version, it is workable for latest iPhone 7 plus

How to charge the ID115 smart band properly?
USB charging style, we need to remove the device from the band and plug into computer to charge.

How to charge

How to sync data on “Veryfit 2.0” APP?
The smart bracelet will send data to “Veryfit 2.0} APP automatically!!!
If it does not work, please open the APP, click the screen and out down to sync activities data.

Please turn on Bluetooth function all the time!!!
turn on Bluetooth

You will see “connecting” icon on APP.

Connecting with app

Choose a Device

Binding Device

Please note Bluetooth range is only 10 meters, if the distance between smart bracelet and your cellphone is over 10 meters, the smart bracelet status would be “Disconnected” and this means we can not sync data smoothly!!!
Can we share date to Apple watch APP? YES we can!!!

Click the “Veryfit 2.0” APP find Users at the bottom, you will see “Connect to Apple Health” click it and choose what you would like to share with Apple Health APP

share with Apple Health APP

Are these smart bracelets / smart watches fully waterproof?
IP-X4 rating, they are just for daily life water resistant, which means we can not wear it when we are swimming or taking shower.

Please don’t believe in advertising if it shows these smart devices are professional waterproof!!! They are not!!!

Are these smart bracelets work with Bluetooth?
Bluetooth 4.0 technology, low power consumption, faster & stable transmission speed.

Bluetooth range?
Make sure the distance between your cellphone and smart bracelet / smart watch is within 10 meters, because Bluetooth range is only 10 meters, if the distance over 10 meters, the APP will not recognize the icon (it is like ID numbers, people have their own ID numbers How long does it takes to fully charge the smart bracelet / smart watch?

— it takes 3 or 4 hours to charge the device from 0% to 100%

NOTE: we have been testing charging function for a while, it takes
6-8 hours to fully charge the device if you plug it in your laptop or computer PC!!! THE CHARGER COULD BE USED LONGER BY THIS WAY!!!

How long will battery last?
A fully charged smart bracelet battery provides approximately: 5 days standby time, battery will drop to zero within a day, 24 hours of continuous usage!!!

Is the battery rechargeable?
— YES

What type of battery do you use?
— lithium battery (safe and durable)

Questions about your ID115 Smart Bracelet User Manual & App? Post in the comments!
Download ID115 Smart Bracelet User Manual & App Manual [PDF]

DOfit HR Activity Tracker User Manual

DOfit HR Activity Tracker

DOfit HR Activity Tracker User Manual

Smartphone download – App
• Make sure your mobile smart phone is compatible with the Veryfit App (Android 4.4 and above and i0S7.1 and above)

• Once you have confirmed compatibility, you can proceed to download the Veryfit App from your relevant App Store (Veryfit App is FREE)

• To download the Veryfit Application you can choose 0A N. El to search the App store -search for Veryht for Heart . Rate” or you can use your phones OR Scan App to take you to the App directly by scanning the OR Barcode.

• Once the App is downloaded you may begin to bind your tracker to the App. Make sure that your tracker is charged before attempting to bind the device.

Download App

Charging your tracker
• If your DoFit HR is under low power – you will need to charge it.
• To charge the DoFit HR remove the bottom arm of the strap. (the rubber pulls off from the body of the tracker) Once the arm is removed, it will emose the USB section that will then plug into any USB port (5V-500mA) for charging_
• It will take about 60 minutes to fully charge the DOR HR.

Charging your tracker

Pairing your device
• Make sure that your smartphone Bluetooth is ON and that both the device and smartphone have some battery capacity.

• Open the Veryfit App on your smartphone – you will be taken to the -Add Device screen.

• When in search mode on your smartphone – make sure you wake up your DoFit HR tracker by pushing the activate button on the bottom of the front screen (this will aid the device in being paired with your smartphone).

Paring your Device

Select the tracker in the smartphone searching list – “DoFit HR”

• The Veryfit App will search for your tracker automatically and, once found, it will display the name on your smartphone – DoFitHR

• Select this name – DoFit HR – wait a few seconds.

• Select this name – DoFit HR – wait a few seconds.

• During this process you will be prompted to “Allow’ access to your phones services “camera and location” – ‘Allow” for successful setup.

• Your smartphone will then pair and bind this tracker: push the OK option on your smartphone, and the DoFit HR tracker will vibrate confirming success.

• You are now ready to set up and use your DoFit HR Tracker.

Setting up your device
• Open your Veryfit App or your Smartphone.

• You will see 4 main icons on the bottom of the screen – Main pre I Details I Device I User.

• Go to – USER – here you can set your targets for Steps and for Sleep (Hours).

• MY INFO – is for setting your personal details, Name, date of birth, gender, height and weight – this is very important as it assists in working out your data.

SYSTEM SETTINGS

1. Unit set – Is for setting to Metric or Imperial (SA uses Metric)
2. App version – this is for updating your App to the current version
3. Restart device – gives you the option to RESTART the tracker
4. Feedback – is for giving feedback via an email (your applicable data rates WI apply-as it sends an email).
5. If you use 105 – it also allows you to connect the App with your Apple Health, if you wish to.

DEVICE – choose the various settings that you wish to use (or not), as follows:

1. Call Alert – this will notify you of a call on your tracker
2. Sedentary Alert-will remind you to stand up and walk if stationary too long
3. Alarm Alert – allows you to set up various alarms
4. SNS Alert-will notify you of all alerts from 8 various social media Apes
5. Take Photo – this allows you to use the tracker as a shutter button for taking photos via your smartphone camera
6. Wrist Sense – will show time when your wrist is brought up towards your face through 90 degrees – automatically showing the time
7. Anti-lost Alert- this will alert you if you move beyond your smartphones Bluetooth range – normally 10-15 meters
8. Find Phone – on your device hold function button on the icon (Magnify Glass & Phone) – this will then make your smartphone ring or vibrate- depending on its mode
9. SMS Alert – this will send you a notification of the any SMS you have received on your smartphone
10. Auto Heart Rate – set to Auto it will then automatically take readings of your heart rate. If set to Manual it will only record Heart rate when you request it via the tracker- no data will be recorded for history
11. Night Mode – this allows you to set the night mode time slots -making your unit go into a hibernation mode so as not to bother you during these hours set by you -on App
12. Display Mode – you can choose between Landscape or Vertical display modes
13. Heart Rate Zones – this allows you to set your personal Max heart rate which will then adjust the various zones accordingly
14. Device Upgrade – this will allow you to update your trackers software when required

DETAILS:
1. This will display your Activity, Sleep and Heart Rate with options for daily, weekly, monthly or yearly
2. A detailed report is shown below and also display’s your average results f or the week etc

MAIN PAGE:
1. This displays the days results by – Activity (steps), Sleep (Hours/min) and Heart Rate.
2. When tapping the screen on a specific option, it will display the results per hour, in that current day
3. On the top Left corner of the screen you will see a share option (3 circles)- tap this to share results via the selected social media platform (rifts go through the initial set up options and you can then share your achievements)
4. On the top Right corner of the screen you will see a chain link which indicates whether your tracker is connected to the App.

How to Use
Key Definitions Tap to switch on, and switch between trackers functions Long Press (hold) is to Activate sport mode

How to Use
Sports Mode

Function Instruction
Activities Record: Record daily activities: you can check daily activities including steps, distance and calorie burnt in the app; Sleep

Monitoring: Device automatically recognizes your state and monitors sleep progress with analyzing deep sleep and light sleep hours;

Anti-Lost: When the smart phone is beyond the Bluetooth range (5m), the tracker vibrates to remind. (the App must be open and connected to tracker)

Device Data Storage: The activity data will be cleared every 0:00am as a cycle but, the tracker itself keeps 7 days’ data (after 7 days, the data will be cleared). We suggest user syncs data with app at least one time within 7 days of use.

FAQ
Can’t find device when pairing Tracker?
Please make sure the smart phone Bluetooth is ON and smart phone OS Android 4.4 & above and lOS 7.1 & above. Please make sure the device is near the smart phone when pairing (normal 05m) and among the normal Bluetooth communication distance range (within 10m). Please make sure the device is charged. If there is still problem after full charge, please contact us.
– See feedback (under system settings on smartphone).

How to Restore Factory Defaults
Make sure the device is connected with app, to in the app, enter “User menu” then “Mine-SystemSetting” and choose “Restart Device.

How to update the device
Make sure the tracker is connected with app, enter the app “Device”-“Device upgrade”, please wait a few minutes before update done. If there is no available upgrade, nothing will happen.

Basic Specifications
CPU: Nordic
Sensor: Kionix
HR Sensor: Silicon labs 511142
Host Weight: 18g
Battery Type: Polymer Rechargeable Li Battery
Battery Capacity: 50mAh Data
Sync Bluetooth
Working Temperature: -10C-45C
Dust proof and Waterproof level.:1P67
Standby period: more than 7 days

• This product is equipped with Bluetooth BF signal and self developed algorithm, the accuracy of step pedometer is estimated at 95%.

For further information and help, please visit www.dofit.co.za

Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules These limits we designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can he determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a draft different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

TA

Questions about your DOfit HR Activity Tracker ? Post in the comments!
Download DOfit HR Activity Tracker Manual [PDF]