ANS UL40 Smartphone User Manual

ANS UL40 Smartphone User Manual

ANS UL40

Your UL40 Box Contents

Your UL40 Box Contents

Your UL40 Smartphone

Your UL40 Smartphone

Your UL40 Smartphone inside

Your UL40 Smartphone inside

Set Up Your Device
The device’s set up screens will guide you through the set up process.

Set Up Your Device

Complete the Setup Screens
Follow the set up process prompts to:
• Sign in to (or set up) a Google® Account.
• Protect your phone by activating device protection features.
• Personalize your device.
When setup is finished, you’ll see your device’s home screen.

Home Screen
Tap from any screen to return to the home screen.

Home Screen

Notifications
When you see a notification icon on the left side of the status bar, drag the status bar down to display the notification panel. Tap a notification to open it.

When you see a notification icon on the left side

Lock & Unlock Your Screen
Your phone allows you to quickly turn the screen off when not in use and to turn it back on and unlock it when you need it.Turn the Screen Off When Not In Use
• To quickly turn the screen off, press the Power/ Lock button. Pressing the Power/Lock button again will turn on your phone screen and show the lock screen. Turn the Screen On and Unlock It
• To turn the screen on, press the Power/Lock button. The lock screen appears.
• Swipe your fingers upward to unlock it.
• If you have set up a screen lock, you will be prompted to draw the pattern or enter the password or PIN.

LED Indicator
There is an LED indicator light on the front of your phone that provides information during the charging process.

While charging…
• A GREEN LED light will indicate a charge level of at least 90%
• A RED LED light will indicate a charge level of less than 90%

Wi-Fi
wireless access point or “hotspot.” Turn Wi-Fi On and Connect to a Network
1. Tap o>cap > SettingsSettings > Wi-Fi Wi-Fi.
2. The Wi-Fi settings menu appears.
3. Tap the switchswitch to On to turn Wi-Fi on.
4. Wi-Fi is enabled. You will see the names and security settings of in-range Wi-Fi networks.
5. Tap a Wi-Fi network to connect, enter the password (if it’s not an open network), and then tap CONNECT.

Bluetooth
Bluetooth is a technology that enables wireless connection with PCs, Bluetooth devices with hands-free features, etc.
To enable Bluetooth
1. Tapo > cap> SettingsSettings > BluetoothBluetooth .
2. The Bluetooth settings menu appears.
3. Tap the switch to Onswitch to turn Bluetooth on.
4. Bluetooth is enabled.
5. Nearby devices appear in the “Available devices” list. To pair with another Bluetooth device, tap a device from the “Available devices” list, and follow the onscreen instructions to pair with the device.

Internet
Tap o> InternetInternet connect to open the Internet app.
• The app will open to the Internet Home Page. From here you can click on any of the Favorites icons listed, or start an internet search at the top of the page.
Internet
• At the bottom of the page, the icons for Forward, Bookmarks, Home, Share and Open a New Tab are located.
• If you choose Share, a new menu appear allowing you to share the page you are viewing via Bluetooth, Gmail, Hangouts, Messaging, Copy to Clipboard or Save to Drive.

Contacts
Tapo > Contacts Contact to access and manage your contacts.

Add contact
Add a Contact

Calendar
Tap o > cap> Calendar Calendarto open the Calendar app.
• Tap on the Calendar Clander Viewview and then tap to add a new calendar event.

Calendar

• Scroll down for additional Calendar event options.

Camera and Video
Tap o > Camera Camerato open the Camera app.
• Slide from left to right on the viewfinder screen to access more options.
• Tap the circular photo in the bottom left corner of the viewfinder screen to access the gallery.You can also access the gallery by tapping ocap > PhotosPhotos .

Camera and Video

Email Setup
1. Tap  ocap > Settings Settings > Accounts.
2. Tap Add account and then select an account type.
3. Follow the prompts to enter your account information.
Important: Before setting up a Microsoft® Exchange ActiveSync® account, contact your company’s Exchange Server administrator for required sign-in information.

Email Setup

Note: The Accounts screen will show any accounts that have already been set up, including Google Accounts that may have been configured during the set up process.

Email
Tap o > Email Emailto access your email accounts.
• Tap compose a new email to compose a new email message.

Email option

Google Play
Google Play is the place to go to find new apps, games, movies, and more.
Use Google Play for Downloads

Google Play

1. Tap o > Play Store Play Store .
2. The first time you visit the Google Play Store app, tap Accept to accept the Terms of Service.
3. Browse through featured apps and games, or tap the Google Play search bar to start a search.
4. Tap an item to read a description and reviews.
5. Tap INSTALL (for free apps) or the price (for paid applications) and follow the onscreen prompts.

Note: You must have a Google Account set up on your device to purchase and download apps from the Google Play store.

External microSD® Card
Your UL40 has an external microSD card slot that can be used for additional storage
• To expand device memory using an SD card, while the device is powered off, simply insert the SD card in the slot next to the SIM under the back cover and then power on your device.
• The SD card will be recognized once the device powers on and further instructions will be given.
• Please note that the SD card will not be recognized if you insert it while the device is powered on.
External microSD® Card
• Your SD card can be formatted to use as portable storage (for moving photos and other media between devices) or as internal storage (for storing anything on the device only, including apps and photos. This option requires formatting that prevents it from working with other devices).

Important Safety Information
General Precautions
There are several simple guidelines to operating your phone properly and maintaining safe, satisfactory service.
• Avoid exposing your phone and accessories to rain or liquid spills. If your phone does get wet, immediately turn the power off and keep in a dry place.
• Do not expose your phone to direct sunlight for extended periods of time (such as on the dashboard of a car).
• Although your phone is quite sturdy, it is a complex piece of equipment and can be broken. Avoid dropping, hitting, bending or sitting on it.
• Any changes or modifications to your phone not expressly approved in this document could void your warranty for this equipment and void your authority to operate this equipment. Using Your Phone While Driving Operating your phone while driving is prohibited in some jurisdictions. Laws vary as to specific restrictions. Remember that safety always comes first. Check the laws and regulations on the use of wireless devices in the areas where you drive and always obey them. Also, if using your device while driving, please observe the following:
• Give full attention to driving — driving safely is your first responsibility;
• Use hands-free operation, if available;
• Pull off the road and park before using it.

Restricting Children’s Access to Your Mobile Device
Your device is not a toy. Do not allow children to play with it because they could hurt themselves and others, damage the device, or make calls that increase your device bill. Keep the device and all its parts and accessories out of the reach of small children. Screen images are simulated. Appearance of device may vary. The actual available capacity of the internal memory is less than the specified capacity because the operating system and default applications occupy part of the memory. The available capacity may change when you upgrade the device.

Following Safety Guidelines
To operate your phone safely and efficiently, always follow any special regulations in a given area. Turn your phone off in areas where use is forbidden or when it may cause interference or danger. Caring for the Battery The guidelines below help you get the most out of your battery’s performance

• In order to avoid damage, charge the battery only in temperatures that
range from 32° F to 113° F (0° C to 45° C).
• Don’t use the battery charger in direct sunlight or in high humidity areas, such as the bathroom.
• Never dispose of the battery by incineration.
• Don’t attempt to disassemble, open crush, bend or deform, puncture, shred or short-circuit the battery.
• The battery may need recharging if it has not been used for a long period of time.
• Don’t store the battery in high temperature areas for long periods of time. It’s best to follow these storage rules:
Less than one month: -4° F to 140° F (-20° C to 60° C)
More than one month: -4° F to 113° F (-20° C to 45° C)
• Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, expose to fire, explosion or other hazard.

Disposal of Lithium Ion Polymer (Li-Ion Polymer) Batteries
Do not handle a damaged or leaking Li-Ion Polymer battery as you can be burned. Special Note: Be sure to dispose of your battery properly. In some areas, the disposal of batteries in household or business trash may be prohibited.

RF Exposure Information (SAR)
This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States.

During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 10mm. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.

The exposure standard for wireless devices employing a unit of measurement is known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.

This device is compliant with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement methods and procedures specified in IEEE1528.

The FCC has granted an Equipment Authorization for this model with all Help reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC ID: 2ALZM-UL40. For this device, the highest reported SAR value for usage against the head is 1.48 W/kg, for usage near the body is 1.13 W/kg.

While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirements. SAR compliance for body-worn operation is based on a separation distance of 10mm between the unit and the human body. Carry this device at least 10mm away from your body to ensure RF exposure level compliant or lower to the reported level. To support body-worn operation, choose belt clips or holsters, which do not contain metallic components, to maintain a separation of 10mm between this device and your body. RF exposure compliance with any body-worn accessory, which contains metal, was not tested and certified, and use of such body-worn accessories should be avoided.

Federal Communication Commission (FCC)
Radiation Exposure Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user mus t follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body.

Industry Canada license-exempt Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Where can I find additional information?
For additional information, please refer to the following resources: Federal Communications Commission (FCC) RF Safety Program (http://www.fcc.gov/oet/rfsafety) International Commission on Non-lonizing Radiation Protection (http://www.icnirp.de) World Health Organization (WHO) International EMF Project (http://www.who.int/emf)

American Network Solutions Limited Warranty Period
American Network Solutions LLC (“ANS”) warrants this device is free from defects in material and workmanship under normal use and service for twelve (12) months commencing upon the date of purchase by the first consumer purchaser. If proof of purchase cannot be provided, the manufacturing date as recorded by ANS, based upon the serial number, will be deemed to be the start of Limited Warranty Period.

Limited Warranty Statement The consumer should never attempt to open or disassemble the device and doing so may cause damage that voids your warranty. The device is equipped with an internal rechargeable battery that is non-removable. This warranty does not cover defects for or resulting from:

1. Improper or unreasonable use or maintenance;
2. Failure to follow operating instructions; accident; excess moisture; insects; lightning; power surges; connections to improper voltage supply;
3. Unauthorized alteration or modification of original condition;
4. Damages caused by inadequate packing or shipping procedures;
5. Devices purchased from unauthorized dealers; or
6. Devices whose mechanical serial number or electronic serial number has been removed altered or defaced.

During the Limited Warranty Period, ANS will, at its sole option (using new or refurbished replacement parts), repair any defective devices. Repaired devices will be warranted for a period equal to the remainder of the original Limited Warranty on the original device or for NINETY (90) days following the date the repair is completed, whichever is longer. All replaced parts, components, boards and equipment shall become the property of ANS.

The Limited Warranty is good only to the original purchaser of the device during the Limited Warranty Period as long as it remains in the United States and is not transferrable or assignable.

Disclaimer of Warranties; Exclusion of Liability Except as set forth in the Limited Warranty contained on the warranty page enclosed with the device, the purchaser takes the device “AS IS”, and ANS makes no express or implied warranty of any kind whatsoever with respect to the product, including but not limited to, the merchantability of the product or its fitness for any particular purpose or use; the design, condition or quality of the device; the performance of the product; the workmanship of the product or the components

contained therein; or compliance of the product with the requirements of any law, rule, specification or contract pertaining thereto. Nothing contained in the instruction guide shall be construed to create an express or implied warranty of any kind whatsoever with respect to the device. In addition, ANS shall not be liable for any damages of any kind resulting from the purchase or use of the device or arising from the breach of the Limited Warranty, including incidental, special or consequential damages, or loss of anticipated profits or benefits. Further, ANS shall not be liable for the delay in rendering services under the Limited Warranty or loss of use during the time the device is being
repaired.

ANS is not liable for performance issues or incompatibilities caused by your editing of registry settings, or your modification of operating system software or any other similar editing, modification or the like to the device. Using custom operating system software may cause your device and applications to work improperly. Your carrier may not permit users to download certain software, such as custom OS. If your carrier prohibits this, if you attempt to download software onto the device without authorization, you will be notified on the screen that the device will no longer operate and be instructed to power down the device. You must then contact your carrier to restore the device to the carrier authorized settings.

ANS disclaims liability for removal or reinstallation of the product, for geographic coverage, for inadequate signal reception by the antenna or for communications range or operation of the cellular system as a whole. When sending your wireless device to ANS for repair or service, please note that any personal data or software stored on the device may be inadvertently erased or altered. Therefore, we strongly recommend you make a back up copy of all data and software contained on your device before submitting it for repair or service. This includes all contact lists, downloads (i.e. third-party software applications, ringtones, games and photos) and any other data added to your device.

In addition, if your wireless device utilizes a multimedia card, please remove the card before submitting the device, and store for later use when your device is returned. ANS is not responsible for and does not guarantee restoration of any third-party software, personal information or memory data contained in, stored on, or integrated with any wireless device, whether under warranty or not, returned to ANS for repair or service.

For warranty claims, please contact 1-844-450-0841.

Help
Customer Service
• For American Network Solutions Customer Service, please dial: 1-844-450-0841 Online Support
• For ongoing help over the life of your device, please visit: www.ansmobility.com

Online Support

©2017 American Network Solutions LLC. All rights reserved. Android, Google, Google Play and other marks are trademarks of Google, Inc. The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. All other logos are trademarks of their respective owners. Conceived in America. Made in China.

GSGUL40GEN FCC Printed in China

Questions about your HANS UL40 Smartphone User Manual? Post in the comments!
ANS UL40 Smartphone User Manual [PDF]

ANS-UL40-User-Manual

Gree Electronic CS532U Air Conditioner User Manual


Remote controller

CS532U Air Conditioner User Manual

Gree Electric Appliances, Inc.

Matching instructions
Matching instructions This model adopts RF remote control. The remote controller shall be matched with the air conditioner before operation, otherwise the remote control will be invalid. Before operation, please read the instructions in this page carefully and then do the corresponding matching operation.

Note
1. Please do the following operation within 2m from the unit. Matching is not needed anymore once it is done.
2. During matching, please keep the remote controller and air conditioner under standby status.
3. When the signal of remote controller can’t be received, please match the remote controller with the unit again.

Matching of remote controller
When the unit is under standby status, please get close to the air conditioner within 2m and then hold on pressing (Humidify/Health) button for 3s. The remote controller and air conditioner will enter matching automatically. If matching is done, the unit will give out three sounds; if matching is failed, please get closer to the unit and arrange matching again.

Explanation of Symbols
DANGER: Indicates a hazardous situation that, if not avoided, will result in death or serious injury.

WARNING: Indicates a hazardous situation that, if not avoided, could result in death or serious injury.

CAUTION: Indicates a hazardous situation that, if not avoided, may result in minor or moderate injury.

NOTICE: Indicates important but not hazard-related information, used to indicate risk of property damage.

WARNINGIndicates a hazard that would be assigned a signal word WARNING or CAUTION.

Precautions

WARNING

Operation and Maintenance
– This appliance is not intended for use by persons (incl-uding children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

– Children shall not play with the appliance.

– Cleaning and user maintenance shall not be made by children without supervision.

– Do not connect air conditioner to multi-purpose socket. Otherwise, it may cause fire hazard.

– Do disconnect power supply when cleaning air conditioner. Otherwise, it may cause electric shock.

– If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

– Do not wash the air conditioner with water to avoid electric shock.

– Do not spray water on indoor unit. It may cause electric shock or malfunction.

– After removing the filter, do not touch fins to avoid injury.

– Do not use fire or hair dryer to dry the filter to avoid deformation or fire hazard.

– Maintenance must be performed by qualified professionals. Otherwise, it may cause personal injury or damage.

– Do not repair air conditioner by yourself. It may cause electric shock or damage. Please contact dealer when you need to repair air conditioner.

– Do not extend fingers or objects into air inlet or air outlet. It may cause personal injury or damage.

– Do not block air outlet or air inlet. It may cause malfunction.

– Do not spill water on the remote controller, otherwise the remote controller may be broken.

– When below phenomenon occurs, please turn off air conditioner and disconnect power immediately, and then contact the dealer or qualified professionals for service.
*Power cord is overheating or damaged.
*There’s abnormal sound during operation.
*Circuit break trips off frequently.
*Air conditioner gives off burning smell.
*Indoor unit is leaking.

– If the air conditioner operates under abnormal conditions, it may cause malfunction, electric shock or fire hazard.

– When turning on or turning off the unit by emergency operation switch, please press this switch with an insulating object other than metal.

– Do not step on top panel of outdoor unit, or put heavy objects. It may cause damage or personal injury.

Attachment
– Installation must be performed by qualified professionals. Otherwise, it may cause personal injury or damage.

– Must follow the electric safety regulations when installing the unit.

– According to the local safety regulations, use qualified power supply circuit and circuit break.

– Do install the circuit break. If not, it may cause malfunction.

– An all-pole disconnection switch having a contact separation of at least 3mm in all poles should be connected in fixed wiring.

– Including an circuit break with suitable capacity, please note the following table.Air switch should be included magnet buckle and heating buckle function, it can protect the circuit-short and overload.

– Air Conditioner should be properly grounded. Incorrect grounding may cause electric shock.

– Don’t use unqualified power cord.

– Make sure the power supply matches with the requirement of air conditioner.Unstable power supply or incorrect wiring or malfunction. Please install proper power supply cables before using the air conditioner.

– Properly connect the live wire, neutral wire and grounding wire of power socket.

– Be sure to cut off the power supply before proceeding any work related to electricity and safety.

– Do not put through the power before finishing installation.

– If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

– The temperature of refrigerant circuit will be high, please keep the interconnection cable away from the copper tube.

– The appliance shall be installed in accordance with national wiring regulations.

– Installation must be performed in accordance with the requirement of NEC and CEC by authorized personnel only.

– The air conditioner is the first class electric appliance. It must be properly grounding with specialized grounding device by a professional. Please make sure it is always grounded effectively, otherwise it may cause electric shock.

– The yellow-green wire in air conditioner is grounding wire, which can’t be used for other purposes.

– The grounding resistance should comply with national electric safety regulations.

– The appliance must be positioned so that the plug is accessible.

– All wires of indoor unit and outdoor unit should be connected by a professional.

– If the length of power connection wire is insufficient, please contact the supplier for a new one. Avoid extending the wire by yourself.

– For the air conditioner with plug, the plug should be reachable after finishing installation.

– For the air conditioner without plug, an circuit break must be installed in the line.

– If you need to relocate the air conditioner to another place, only the qualified person can perform the work. Otherwise, it may cause personal injury or damage.

– Select a location which is out of reach for children and far away from animals or plants.If it is unavoidable, please add the fence for safety purpose.

– The indoor unit should be installed close to the wall.

– Instructions for installation and use of this product are provided by the manufacturer.

FCC WARNING
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions :

(1) this device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

*Reorient or relocate the receiving antenna.
*Increase the separation between the equipment and receiver.
*Connect the equipment into an outlet on a circuit
*Consult the dealer or an experienced radio/TV different from that to which the receiver is connected.
*technician for help.

IC STATEMENT

This device complies with Industry Canada licence- exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

This equipment complies with FCC’s and IC’s RF radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Installers must ensure that 20cm separation distance will be maintained between the device (excluding its handset) and users. Cet appareil est conforme aux limites d’exposition au rayonnement RF stipulées par la FCC et l’IC pour une utilisation dans un environnement non contrôlé. Les

antennes utilisées pour cet émetteur doivent être installées et doivent fonctionner à au moins 20 cm de distance des utilisateurs et ne doivent pas être placées près d’autres antennes ou émetteurs ou fonctionner avec ceux-ci. Les installateurs doivent s’assurer qu’une distance de 20 cm sépare l’appareil (à l’exception du combiné) des utilisateurs.

Working temperature range

Indoor side DB/WB Outdoor side DB/WB
Maximum cooling 26.7/19.4 46.1/23.9
Maximum heating 26.7/- 23.9/18.3

NOTICE:
– The operating temperature range (outdoor temperature) for cooling only unit is
-18C ~54C ; for heat pump unit is -30C ~ 54C.

Buttons on remote controller

Remote controller

Remote controller Button

Introduction for icons on display screen

Introduction for icons on display screen

Introduction for buttons on remote controller

Note:
After putting through the power, the air conditioner will give out a sound. Operation indictor ” ON ” is ON (red indicator). After that, you can operate the air conditioner by using remote controller.

Under on status, pressing the button on the remote controller, the signal icon ” Signal ” on the display of remote controller will blink once and the air conditioner will give out a “de” sound, which means the signal has been sent to the air conditioner.

1. ON/OFF button
Press this button can turn on or turn off the air conditioner. After turning on the air
conditioner, operation indicator ” ON “on indoor unit’s display is ON (green indicator. The colour is different for different models), and indoor unit will give out a sound.

2. +/- button

– Press “+” or ” – ” button once increase or decrease set temperature 0.5C Holding “+” or ” – ” button, 2s later, set temperature on remote controller will change quickly.On releasing button after setting is finished, temperature indicator on indoor unit will change accordingly. (Temperature can’t be adjusted under auto mode)

– When setting TIMER , press “+” or ” – ” button to adjust time.

3. Cool button

Press this button, unit will operate in cool mode.

4. Heat button

Press this button, unit will operate in heat mode.

5. FAN button

Pressing this button can set fan speed circularly as: low( ) , low medium( ),
medium ( ),medium high( ),high( ),super( ),auto(AUTO),quiet( ).

FAN button

Note:
– Turbo function is not available under dry and auto mode.
– Automatically operate slient speed when starting sleep fuction.
– The unit operates at low speed under dry and auto dry mode. The speed can’t be adjusted.
– Under AUTO speed, air conditioner will select proper fan speed automatically according to ambient temperature.

6. I FEEL button
Press this button to start I FEEL function and ” I FEEL button” will be displayed on the remote controller. After this function is set, the remote controller will send the detected ambient temperature to the controller and the unit will automatically adjust the indoor temperature according to the detected temperature. Press this button again to close I FEEL function and “I FEEL button ” will disappear.
! Please put the remote controller near user when this function is set. Do not put the remote controller near the object of high temperature or low temperature in order to avoid detecting inaccurate ambient temperature.

7. swing mode button
– Under simple swing mode, press this button can turn on (display ” swing mode” icon ) or turn off ( not display ” swing mode” icon) left&right swing function.
– Under OFF status, press “+” button and ” swing mode” button simultaneously can switch between simple swing mode and fixed swing mode. During switching time, “swing mode ” icon on remote controller will flash twice.
– Under fixed-angle swing mode, press this button and the left and right swing status Under OFF status, press “+” button and “swing mode ” button simultaneously can switch will change in the sequence as below:

Swing

8. MODE button
Press this button to select your required operation mode.
MODE button

When selecting auto mode, air conditioner will operate automatically according to ambient temperature. Set temperature can’t be adjusted and will not be displayed as well. Press “FAN” button can adjust fan speed. Press ” swing mode” / “auto mode ” button can adjust fan blowing angle.

After selecting cool mode, air conditioner will operate under cool mode. Press “+” or “-” button to adjust set temperature. Press “FAN” button to adjust fan speed.Press ” swing mode” / “auto mode ” button to adjust fan blowing angle.

When selecting dry mode, the air conditioner operates at low speed under dry mode. Under dry mode, fan speed can’t be adjusted. Press ” swing mode” / “auto mode ” button to adjust fan blowing angle.

When selecting fan mode, the air conditioner will only blow fan,Press “FAN” button to adjust fan speed. Press “swing mode ” / “auto mode ” button to adjust fan blowing angle. When selecting heating mode, the air conditioner operates under heat mode. Press “+” or “- ” button to adjust set temperature. Press “FAN” button to adjust fan speed. Press “swing mode ” / ” auto mode” button to adjust fan blowing angle. (Cooling only unit won’t receive heating mode signal. If setting heat mode with remote controller, press ON/OFF button can’t start up the unit).

Note:
For preventing cold air, after starting up heating mode, indoor unit will delay 1~5 minutes to blow air (actual delay time is depend on indoor ambient temperature). Set temperature range from remote controller: 16~30C (61-86°F);

9. auto mode button

– Under simple swing mode, press this button can turn on ( display “auto mode ” icon) or turn off ( not display “auto mode” icon) up&down swing function.
– Under OFF status, press “+” button and “auto mode ” button simultaneously can switch between simple swing mode and fixed swing mode. During switching time,“ auto mode” icon on remote controller will flash twice.
– Under fixed swing mode, press this button and up and down swing status will eously can switch change in the sequence as below:

10. T-ON/T-OFF button

T-ON button
“T-ON” button can set the time for timer on. After pressing this button, ” T-ON” icon disappears and the word “ON” on remote controller blinks. Press “+” or “-”button to adjust T-ON setting. After each pressing “+” or “-”button, T-ON setting will increase or decrease 1min. Hold “+” or “-”button, 2s later, the time will change quickly until reaching your required time. Press“T-ON”to confirm it. The word “ON” will stop blinking. “T-ON ” icon resumes displaying.Cancel TIMER ON: Under the condition that T-ON is started up, press “T-ON” button to cancel it.

T-OFF button
“T-OFF” button can set the time for timer off. After pressing this button, “T-ON ” icon disappears and the word “OFF” on remote controller blinks. Press “+” or “-” button to adjust T-OFF setting. After each pressing “+” or “-” button, T-OFF setting will increase or decrease 1min. Hold “+” or “-” button, 2s later, the time will change until reaching your required time. Press“T-OFF”to confirm it. The word “ON”will “OFF” will stop blinking. ” T-ON” icon resumes displaying. Cancel T-OFF.Under the condition that T-OFF is started up, press “T-OFF” button to cancel it.

Note:
– Under on and off status, you can set T-OFF or T-ON simultaneously.
– Before setting T-ON or T-OFF, please adjust the clock time.
– After starting up T-ON or T-OFF, set the constant circulating valid. After that, air conditioner will be turned on or turned off according to setting time. ON/OFF button has no effect on setting. If you don’t need this function, please use remote controller to cancel it.

11. CLOCK button
Press this button to set clock time. ” T-ON” icon on remote controller will blink. Press “+” or “-” button within 5s to set clock time. Each pressing of “+” or “-” button, clock time will increase or decrease 1 minute. Hold “+” or “-” button, 2s later, time will change quickly. Release this button when reaching your required time. Press “CLOCK”button to confirm the time. “T-ON ” icon stops blinking.

Note:
Clock time adopts 24-hour mode. The interval between two operations can’t exceeds 5s. Otherwise, remote controller will quit setting status. Operation for TIMER ON/TIMER OFF is the same.

12. Humdity/health button
Press this button to select your required operation mode.
Humdity-health button

Note:there is no this function for this unit. If press this button,the main unit will click, but it also runs under original status.

13. X-FAN button
Pressing this button in COOL or DRY mode, the icon “COOL or DRY mode ” is displayed and the indoor fan will continue operation for 2 minutes in order to dry the indoor unit even though you have turned off the unit. After energization, X-FAN OFF is defaulted. X-FAN is not available in AUTO, FAN or HEAT mode.
This function indicates that moisture on evaporator of indoor unit will be blowed after the unit is stopped to avoid mould.

– Having set X-FAN function on: After turning off the unit by pressing ON/OFF button indoor fan will continue running for about 2 min. at low speed. In this period, press X-FAN button to stop indoor fan directly.

– Having set X-FAN function off: After turning off the unit by pressing ON/OFF button, the complete unit will be off directly.

14. Air button
Press this button to select your required operation mode.
Air button

Note:there is no this function for this unit. If press this button,the main unit will click, but it also runs under original status.

15. LIGHT button
Pressing this button to turn off display light on indoor unit. Press this button again to turn on display light.

16. SLEEP button
Pressing this button can select Sleep 1, Sleep 2,Sleep 3, Sleep 4 or cancel Sleep circularly as below:
SLEEP button

– In Sleep 1 and Sleep 2, the air conditioner will run according to a group of presetting temperature curves.
– Sleep 3 – the sleep curve setting under DIY Sleep mode: (1) Under Sleep 3 mode, long press “AIR” button, the remote controller will enter the setting of personalized sleep. In this case, the timer zone of remote controller will display “1 hr” and the set temperature zone “88” will display the corresponding temperature of the last set sleep curve and blink (The first entering will display according to the initial curve setting value of manufacturer);
– (2) Press “+” and “-” button to adjust the corresponding temperature. After adjusting, press “AIR” button to confirm it;
– (3) At this time, the timer time on the remote controller will increase automatically by 1hr (that is “2 hr” or “3 hr” … or “8 hr”). The set temperature zone “88” will display the corresponding temperature of the last set sleep curve and blink;
– (4)Repeat step(2) and step (3) until 8-hour temperature setting is finished, then the sleep curve is set successfully. After that, remote controller will resume displaying the original timer time and temperature zone will resume displaying the original set temperature.
– Sleep 3 – the sleep curve inquiry under DIY Sleep mode: User can inquire the set sleep curve according to the setting method of sleep curve. Enter the setting of personalized sleep but do not change the temperature. Then press “AIR” button to confirm the setting.

Note: In the above setting or inquiry procedure, if there is no button pressing within 10s, remote controller will automatically exit the sleep curve setting and resume the original display. If ON/OFF, MODE, TIMER, HUMIDIFY, SLEEP, COOLING or HEATING button is pressed during the setting or inquiry procedure, remote controllerwill also exit the sleep curve setting.
– Sleep 4 is Siesta mode. The set temperature will change automatically according to the features of siesta.
– Sleep function will be disabled if the air condition is restarted after power failure;
– when sleep function is turned on, quite fan speed will be also turned on.
– Sleep function can not be set in AUTO mode.

17. Wifi button
– Press this button 3s can set wifi function on or OFF.
– At OFF status,press mode button and wifi button,can reset wifi mode parameter. and open wifi function.

About X-FAN function
This function indicates that moisture on evaporator of indoor unit will be blowed after the unit is stopped to avoid mould. indoor fan will continue running for about 2 min. at low speed. In this period, press X-FAN button to stop indoor fan directly.
1. Having set X-FAN function on: After turning off the unit by pressing ON/OFF button the complete unit will be off directly.
2. Having set X-FAN function off: After turning off the unit by pressing ON/OFF button,the complete unit will be off directly.

About AUTO RUN
When AUTO RUN mode is selected, the setting temperature will not be displayed on the LCD, the unit will be in accordance with the room temp. automatically to select the suitable running method and to make ambient comfortable.

About lock
Press + and – buttons simultaneously to lock or unlock the keyboard. If the remote controller is locked, the icon ( LOCK ) will be displayed on it, in which case, press any button, the mark will flicker for three times. If the keyboard is unlocked, the mark will disappear.

About switch between Fahrenheit and Centigrade
Under status of unit off, press MODE and – buttons simultaneously to switch C and F.

1. After putting through the power, press “ON/OFF” button on remote controller to turn on the air conditioner.
2. HEAT.
3. Press “+” or ” – ” button to set your required temperature. (Temperature can’t be adjusted under auto mode).
4. Press “FAN” button to set your required fan speed: auto, low, medium and high speed. Press “MODE” button to select your required mode: AUTO, COOL, DRY, FAN,
5. Press “SWING” button to select fan blowing angle.

Replacement of batteries in remote controller
Replacement of batteries in remote controller

– During operation, point the remote control signal sender at the receiving window on indoor unit.
– The distance between signal sender and receiving window should be no more than 8m, and there should be no obstacles between them.
– Signal may be interfered easily in the room where there is fluorescent lamp or wireless telephone; remote controller should be close to indoor unit during operation.
– Replace new batteries of the same model when replacement is required.
– When you don’t use remote controller for a long time, please take out the batteries.
– If the display on remote controller is fuzzy or there’s no display, please replace batteries.

Operation of Smart Control (Smart Phone, Tablet PC)

Special Function
How to operate AC or auxiliary device with smart phone or tablet PC after matching: First of all: before using smart connection function, please make sure your smart phone or tablet computer uses the standard Android or iOS operating system. Please refer to the application program for the specific version. This air conditioner can connect 4 smart phones or tablet computers in maximum. 1. Install G-Life on your smart phone/ tablet PC Method 1: Enter Gree official website to download http://www.gree.com/english/downloadcenter/ihome_jsp_catid_2840.shtml
Method 2: Scan the QR code and download the application directly (If your device is not compatible, please download the application in other ways.)

QR code

Method 3: Users of iOS system can search the application “G-Life” through Apple’s App Store. After it is successfully installed, you will see the picture below. Following is the example using iphone 6. (The interface of the application may vary as it is upgraded or used in different operating systems. Please refer to actual application.)

iOS system

Operation of Smart Control (Smart Phone, Tablet PC)
2. Turn on the AC WiFi:
Turn the AC on. First, make sure the remote controller is matched. Then, long-press “WiFi” button on the remote controller for at least 3 seconds. If WiFi icon is shown, it means the WiFi function is turned on.
3. Enter the WiFi setting of your phone and search for the wireless network named G-xxxxxxxx. Take G-A0B40030 as an example. Connect the network.

Turn on the AC WiFi

4. Input the original password 12345 or 12345678 to connect the network.

Input the original password

5. Open the application software and click “Refresh”, and then system will link with the air conditioner automatically. Click “ ” to turn on the control function, and then clock any position on the interface and then software will switch to the remote control interface.

Attention: please change the name and key of the network during the first setting!

6. Left-slide the bottom function bar to “Settings” and click it to enter into internet setting interface. Click “Network Setting”, and input user name and password (the defaulted user name and password is admin) in the “Login” dialog box to enter into “Network Setting” to modify network name (e.g. G-myhome) and password (refer to the attachment: safe mode and password instruction).

Settings

7. After modifying name and password, click it to return and there will be a prompt box, and then clock “OK” to finish the modification. Meanwhile, the software will turn back to interface of “Air-Conditioner” and the AC list will be gone.

After modifying name and password

8. Exit the application and enter your phone’s WiFi Setting. Then you will see the network you just named “G-myhome”. Click it and input the password set in step 6 to join the network.

Exit the application

9. Enter into the software interface again. Meanwhile, the short-distance remote control setting for your air conditioner is fin ished.
Enter into the software interface again

How to reset the AC WiFi module:
Turn unit off with the remote controller and disconnect the power of AC. Then re-connect the power. 1 minute later, press “WiFi” and “Mode” buttons simultaneously. If the AC gives out a beep sound, it means the WiFi module is successfully reset. Attention: Operation of the buttons is only effective in 2 minutes.

Analysis on Common Network Setting Failure:
1. If short-distance control fails, please check the following items one by one!
·Make sure AC is power connected;
·Make sure AC’s WiFi function is turned on as normal;
·Make sure your phone’s WiFi selects the corresponding AC;
·Reset with the remote controller and then start setting again from step 3.

Kindly remind:
1. The air conditioner WiFi function needs about 1 minute to start up.
2. The air conditioner has memory function.
3. Those models have no long-distance control.

Function Introduction on Main Interface

1. Mode: It used for setting operation mode for air conditioner. You can select “Auto”, “Cooling”, “Drying”, “Fan” or “Heating” according to your requirement. Please refer to the part of remote controller for the detailed operation.

Mode

2. Temperature: It used for setting temperature. Set the indoor temperature according to your requirement.

Temperature

3. Fan Speed: It used for setting fan speed. Under cooling or heating mode, if the noise-customized function is turned on, adjust the fan speed and then the noise- -customized function will be turned off automatically. Please refer to the part of remote controller for detailed operation.

Fan Speed

Key Functions Instruction of Application Software

1. Preset: It’s with Timer On and Timer Off function. User can set Timer On and Timer Off according to actual individual requirement.

2.Functions: After entering setting interface, you can turn on or turn off Light, Purify, X-fan and Turbo functions and set Silent, Humidify, Air exchange and other modes. Please refer to the part of remote controller for the function instruction. Among that, Purify, Humidify, Air exchange functions can be set through equipping with special air purifier, humidifier. E-heater is not available for this unit.
Functions

3. Swing: During up&down swing and left&right swing, it’s the fixed angle swing when those two sliding blocks are combined together and full swing when they are separated. When setting up&down swing, the program will turn off regional swing function. However, no influence for regional swing when setting left&right swing.
Swings

4. Advanced: After entering advanced interface, you can set Sleep curve, Regional Swing, Noise and Power saving. Under auto mode and fan mode, sleep curve function can’t be turned on. Only Traditional mode can be selected under dry mode.

Advanced

Regional Swing: After entering Regional Swing, user can set it according to the room size. Press “Air flow position” button and the user can adjust the fan-blowing area through moving the icon of air conditioner left and right according to the actual installation position of the unit.

Regional Swing

User can move the person icon among nine pane areas according to requirement to adjust the fan-blow area. The Regional Swing function can be turned off through up&down swing. The up&down swing in the Regional Swing is only valid under cooling and heating modes. The left&right swing area has relationship with the position of air conditioner set by mobile phone. The left&right swing position may be asymmetry, which is the normal phenomenon.

“Avoid people” function can be turned on or turned off according to user’s personal experience. There may be deviation because of the installation position of air conditioner and the setting of parameters, which is the normal phenomenon.

function can be turned on or turned off

Noise: The noise-customized function for indoor unit can be adjusted according to the actual individual requirement. The detailed adjustment range is different for different models, which is decided by indoor unit.
Noise

Power saving: After energy saving navigation mode is turned on, the air conditioner will detect indoor temperature and outdoor temperature automatically. Meanwhile. the air conditioner will adjust frequency. fan speed and set tempera- ture automatically according to the load status for saving energy.
Power saving

Emergency operation
If remote controller is lost or damaged, please use auxiliary button to turn on or turn off the air conditioner. The operation in details are as below:
As Shown in the fig. Open penel, Press aux. Button to turn off the air conditioner. When the air conditioner is turned on, it will operate under auto mode.
Emergency operation

Clean and maintenance
WARNING
– Turn off the air conditioner and disconnect the power before cleaning the air conditioner to avoid electric shock.
– Do not wash the air conditioner with water to avoid electric shock.
– Do not use volatile liquid to clean the air conditioner.

Clean surface of indoor unit
When the surface of indoor unit is dirty, it is recommended to use a soft dry cloth or wet cloth to wipe it.
NOTICE:
” Do not remove the panel when cleaning it.

Clean and maintenance
1. Check whether air inlets and air outlets are blocked.
2. Check whether circuit break, plug and socket are in good condition.
3. filter is clean.
4. Check whether drainage pipe is damaged.

Checking after use-season
1. Disconnect power supply.
2. Clean filter and indoor until’s panel.

Notice for recovery
1. Many packing materials are recyclable materials.Please dispose them in appropriate recycling unit.
2. If you want to dispose the air conditioner, please contact local dealer or consultant service center for the correct disposal method.

Malfunction analysis
General phenomenon analysis
Please check below items before asking for maintenance. If the malfunction still can’t be eliminated, please contact local dealer or qualified professionals.

General phenomenon analysis

Malfunction analysis

Malfunction analysis

Error Code

Questions about your Gree Electronic CS532U Air Conditioner User Manual? Post in the comments!
Gree Electronic CS532U Air Conditioner User Manual [PDF]

Luna Fofo User Guide

FULL USER MANUAL

FULL USER MANUAL

GETTING STARTED
Congratulations on taking the first step toward discovering smarter skincare by acquiring the LUNA fofo. Before you begin to enjoy all the benefits of sophisticated skincare technology in the comfort of your home, please take a few moments to carefully read the instructions in this manual.

Please READ ALL INSTRUCTIONS BEFORE USE and utilize this product only for its intended use as described in this manual.

WARNING: No modification of this equipment is allowed.

LUNA fofo OVERVIEW:
LUNA fofo knows exactly what your skin needs at all times, so you can get the most out of every cleanse. Using advanced skin sensors and Bluetooth technology, LUNA fofo analyzes the skin condition and moisture level in each zone of the face to create a personalized skin profile that is sent straight to the FOREO app. Take the skin quiz to determine your skin type and true skin age, and then enjoy a customized cleansing routine that automatically syncs with the device.

GETTING TO KNOW YOUR LUNA FoFo

GETTING TO KNOW

HOW TO USE YOUR LUNA fofo:
SKIN ANALYSIS
A 360-degree skin analysis reveals moisture index by zone, skin type, true skin age, and new insights into skin complexion which help improve your daily skincare regimen. To find out your results, you must connect to the FOREO app.

SKIN ANALYSIS

1. Open the FOREO app on your mobile device and turn on your Bluetooth.

2. Turn on LUNA fofo by holding the center button until the light starts blinking, indicating the Bluetooth is connected and your device is ready to begin the skin analysis.

3. Press and hold the skin sensors to your forehead, cheeks, side of nose, and chin. When the app indicates, proceed to the next area.

4. The FOREO app will analyze your skin’s moisture index and skin type and then sync a customized cleansing routine to LUNA fofo.

5. Press and hold for 3 seconds to turn off device.

Note For the most accurate readings, make sure the device is completely dry and both sensors are placed flat and firmly on the skin. Remember to always take your readings at the same time each day.

FACIAL CLEANSING
After conducting your skin analysis, it’s time to cleanse. LUNA fofo removes 99.5% of dirt and oil*, as well as makeup residue and dead skin cells. We recommend cleansing with LUNA fofo for 1 minute every morning and evening.

FACIAL CLEANSING

1. Remove all makeup, dampen skin and then apply your FOREO cleanser.
2. Press the power button once to activate cleansing mode.
3. Cleanse using circular movements on cheeks and forehead, gliding up and down the nose. Based on your customized routine, LUNA fofo will pause to tell you when to move to the next area of your face.
4. Rinse and dry your face. Apply other skincare products, if any.
5. Track your progress and share your results.

CLEANING YOUR LUNA fofo
Always clean LUNA fofo thoroughly after use. Wash the brush surface with water and soap, then rinse with warm water. Avoid using clay-based, silicone-based or grainy cleansers, exfoliators or scrubs, as they may damage LUNA fofo’s soft silicone touch-points. Pat dry with a lint-free cloth or towel. After use, we recommend spraying the device with FOREO Silicone Cleaning Spray and rinsing with warm water for optimal results.

NOTE: Never use cleaning products containing alcohol, petrol or acetone, as they may irritate the skin and damage the silicone.

CHANGING THE BATTERY

CHANGING THE BATTERY -1

CHANGING THE BATTERY - 2

IMPORTANT
FOR OPTIMUM SAFETY:
• If you have a skin condition or any medical concerns, please consult a dermatologist before use.
• Cleansing with LUNA fofo should be comfortable – if you experience discomfort, discontinue use immediately and consult a physician.
• Exercise particular care when cleansing the under-eye regions and do not bring the device into contact
with the eyelids or eyes themselves.
• For hygienic reasons, we do not recommend sharing your LUNA fofo with anyone else.
• Avoid leaving your LUNA fofo in direct sunlight and never expose it to extreme heat or boiling water.
• Close supervision is necessary when this device is used by, on, or near children, as well as those with
reduced physical and mental abilities.
• Discontinue use if this product appears damaged in any way. This product contains no serviceable parts.
• Given the efficiency of the FOREO cleansing routine, we recommend that you do not use LUNA fofo
for more than 3 minutes at a time.
• Use this device only for its intended use as described in this manual. If you do not find the answer to
your specific question, or if you have any other questions regarding the device’s operation, please visit
foreo.com/support.

TROUBLESHOOTING
Precautions to be taken in the event of changes in the performance of LUNA fofo If LUNA fofo is not activated when pressing the center button:
• No battery power. Replace with one AAA battery. If LUNA fofo cannot be switched off and/or interface buttons do not respond:
• Device is not responding. Press power button once to restart the device (holding the button starts Bluetooth search). If LUNA fofo is not picking up your skin during the skin analysis:
• Make sure the device is completely dry and then restart the device.
• Be sure to firmly press both sensors flat on skin.

If LUNA fofo won’t sync to the FOREO app:
• Switch your Bluetooth off and then on again to try reconnecting.
• Close the FOREO app and then reopen it to start the process over.

DISPOSAL INFORMATION
Disposal of old electronic equipment (applicable in the EU and other European countries with separate waste collection systems).

DISPOSAL INFORMATION

The crossed-out dustbin symbol indicates that this device should not be treated as household waste, but rather be brought to the appropriate collection point for recycling of electrical and electronic equipment. By ensuring this device is disposed of correctly, you will help prevent the potential negative consequences for the environment and human health which could be caused by inappropriate waste handling of the product. The recycling of materials will also help conserve natural resources. For more information about the recycling of your device, please contact your local household waste disposal service or your place of purchase.

SPECIFICATIONS

MATERIALS: Body-safe silicone & ABS
COLOR: Pearl Pink/Fuchsia/Aquamarine/Sunflower Yellow/Midnight/Mint/Purple
SIZE: 70 x 66 x 38mm
WEIGHT: 70 g
BATTERY: 1 AAA battery
USAGE: Up to 400 uses per battery
STANDBY: 180 days
FREQUENCY: 150 Hz
MAX NOISE LEVEL: <50 dB
INTERFACE: 1-button

Disclaimer: Users of this device do so at their own risk. Neither FOREO nor its retailers assume any responsibility or liability for any injuries or damages, physical or otherwise, resulting, directly or indirectly, from the use of this device. Further, FOREO reserves the right to revise this publication and to make changes from time to time in the contents thereof without obligation to notify any person of such revision or changes.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to thefollowing two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.

RF exposure statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Model may be changed for improvements without notice.

©2018 FOREO AB. ALL RIGHTS RESERVED.

IMPORTER AND DISTRIBUTOR IN EU: FOREO AB, BIRGER JARLSGATAN 22, 114 34 STOCKHOLM, SWEDEN IMPORTER AND DISTRIBUTOR IN US: FOREO INC., 3565 S. LAS VEGAS BLVD. #159, LAS VEGAS, NV 89109, USA MANUFACTURED BY FOREO AB DESIGNED AND DEVELOPED BY FOREO SWEDEN WWW.FOREO.COM

Questions about your Luna Fofo? Post in the comments!
Luna Fofo User Guide [PDF]

M2 Smart Bracelet User Manual

Intelligent Blood Pressure Blood Oxygen Heart Rate Hand Ring Product Speacification

Frequently Asked Questions

1.unable to search bound hand ring or can not connect,Make sure that the Bluetootll phone is turned on and dose to file bra- celet, restart the phone application or Bluetooth connection with the search and try pairing again. Also, make sure your phone system is Android 4.4 or more, 108 8.0 or more, the phone supports Bluetooth 4.0 and Bluetooth connectivity is stable. (Make sure your phone paired Bluetooth devices not too much)

2.APP no data appearing The bracdet using manual switch the measurement or timing measurements. At first use only basic movement data (step cormter, distance, calories). With continuous use, the bracelet by a single measurement of APP appD- canon, real-Ume measurement, a key measurement di- splay data.

3.Tlle time is not accurate bracelet When the bracdet is dead, re-charging, wristbands time error may occur, connect the phone, the phone will au- tomatically synchronize bracelet time calibration.

4. The bracelet can not charge or use a short time Please use the product with the aligning char ging clip bracelet back of file main contact s, note the alignment and do not constanUy have to grip the friction caused by the shift of the charge after charge is bad. The first time you use the product, please complete the charging power consumption for the first time atter 1- 1.5 hours. Make sure the battery is fully remain in me- mory function and memory status.

5. Can not download or upgrade the hardware upgrade is interrupted. In adopting the hardware upgrade (OTA) Make sure that the bracelet is fully charged and the mobile phone net- work in stable condition.

Please refer to claim 3 connecffon uses precautions to ensure mobile application APP phone supports all the features.

6. Basic parameters
Screen size: OLED 0.86 inches
Bluetooth: BT 4.0
Battery capacity: 85Mah
Bracelet Dimensions: 46.7mm * 19.7mm * 11 .2mm
Strap size: 200mm * 16. Imm * 2.2mm
Material: PC + TPU Waterproof Levd; IP67
Packing list: Host bracelet, Wrist strap, charging cable, manual K The company reserves the right to modify the contents of this manual without prior notice, some of the features are diff erent in the corresponding version of the software are normal conditions

Warning
Please follow medical advice, take measurement results as self-diagnosis and treatment basis is very dangerous. Users with blood circulation disorders, blood pressure disease pleasetake the treatment under the guidance of a doctor~ product measurements are for reference only, and not for any medical use basis.

Intelligent Blood Pressure Blood Oxygen Heart Rate Bracelet Appearance

Bracelet

1. adapted platforms and requirements

Android

Android 4.4 or Above

IOS

IOS 8.0 or Above (Does not include Apple 4)

 

Bluetooth Phone hardware support Blutooth 4.0 ( Blutooth Connection Stable)

 

2. Preparations
First tirne use, PIS ensure battery is fully charged . If not turn on due to low battery, please use the charging clip Align with the contacts of the bracelet main back chatging for 1-1.5 hours (first use make sure the battery is full), the bracelet will indicate charging flag and display the charging status. After charging is complete, press and hold the button 5-8 seconds to boot.

Preparations

3. Connection uses
In normal use conditions, bracelet needs to be connected with the mobile application. be sure to use a mobile phone to meet the above requirements and adap ted platform device hardware requirements, tociownlmd the corresponding phone APP.

IOS Version

Android Version

Matters needing attention:

Android phones: Settings – Accessibility – All functions supported / background operation

Settings – Applications -Wearfit- supports the use of all the features
IPhone: Settings – General – Device Management – Software Trust Setting -Wearfit- allows the use of function

Mobile application language swltdwing according to the phone language Blndlng uses:

After downloading the software, please ensure the phone bluetooth is turned on, open the “Wea rfit”, the first use needs to bind the connection, click binds the bracelet, select the device appeared in the Bluetooth list, click to connect the binding and pairing successfully, will enter the Main interface of mobile phone application.

4. Precautions:

After the bracelet and mobile applications successful binding, the phone will synchronize the time and date, and start recording and analysis of movement, heart rate, blood pressure and sleep.

Bracelet: Click the button to switch wristbands interface

Bracelet function list is as follows

1. Time mode: time, date, batteiy, Bluetooth connection status display
Time mode

2. Movement recording: automatically record movement data on foot every day.
Time mode

3. Distance mode: automatically records walking distance every day.

Distance mode

4. Calories modes: automatic calories data recording per day.
Calories modes

5. Heart rate mode: current heart rate data monitoring, switch the key to heart rate interface, measurement mode will open. if not, please continue switching, bracelet appears as the most recent measurement data. Mobile applications display data by a single measurement, rea1—t1me measurement or a key measurement. (NOT E: Press the switch button to change interface, measurement data can not be synchronized to the phone application. HR interface, pls let the skin wrist above be close to the bracelet to prevent light leakage.)

Heart rate mode

6.Blood Oxygen mode: current blood pressure monitoring, switch the key to the blood pressure interface, lneasureuient iuode will open, if not, please continue switching, bracelet appears as the most recent nlcasurcincrit data. Mobile applications display data by a single measurement, real—tirne measurement or a key measurement. (NOTE: Press the switch button to change interface, measurement data can not be synchronized to the phone application. HR intertace, pls let the skin wrist above be close to the bracelet to prevent light leakage.
Blood Oxygen mode

7. Blood Pressure mode: current blood pressure monitoring, switch the key to the blood pressure interface, measurement mode will open, if not, please continue switching, bracelet appears as the most recent measurement data. Mobile applications display data by A single measurement, real-time measurement or 1: key measurement. (NOTE: Press the switch button to change interface, mcaaurcnicnt data can not be synchronized to the phone application. HR interface, pls let the skin wrist above be close to the bracelet to prevent light leakage.)
Blood Pressure mode

8.Sleep mode: automatic monitoring of the quality and status of sleep every day.

Sleep Mode

9. Powered Off: Long press the button to enter the shutdown interface, long press the button to choose whether to switch off.
Powered Off:

10..Ca.lls reminder: mobile application APP open the function of calls to reminds, click the top left corner to enter the mobile phone APP management interface ~ Device Managernent — Intelligent Reminder — selector switch. When phone calls wristband will vibrate and remind.

1 1.SMS / Applications reminder: mobile application APP open the switch of SMS alerts / reminders, click the top left corner to enter the mobile phone APP management interface – Device Management – Intelligent Reminder – selecting switch.

HR Tips

1.Most people has the heart rate of about 60- 120.

2.Most people resting heart rate is 60 to 90 beats / minute, the optimal heart rate is up to 70 beats / minute.

3.The heart rate of athletes and trained people is 40 to 60 beats / minute.

4.1-Ieart rate is always been changing, and after (§{€IC.lSC, after eating, personal circumstances factors, good or bad mood, etc., are heart rate constantly changing factors.

5.When doing Aerobic exercise to an ettective and safe condition,people’s heart rate is 170, minus age, people should hold the heart rate between 1O8 to 144.

6.Pleaee Exercise regularly, proper diet, weight control, psychological adjustment, to make themselves more healthy and happy every day.

Blood Oxygen Tips

1.0xygen saturation is the the percentage of oxygen- bound oxyhemoglobin (HbO2) capacity vs total hem-
oglobin (Hb) combined capacity, that is the concentr-ation of oxygen in the blood.

Blood Pressure Tips

1. Systo1ic blood pressure, arterial blood delivered to the highest value when referred to as “high pressure”, the heart for the next time the lowest blood pressure value reserve dilate when blood is called “low—voltage”, are referred to as systolic and diastolic blood pressure. 2.Most people has the heart rate of i8O blood pressure (low pressure) to 120 (high pressure) around.

3. Within the normal range, blood pressure has differentiation of age, gender. Generally, the elderly have the higher blood pressure than the young, men have the high blood pressure than women.

4. Blood pressure is always been changing, and after e xercise, after eating, personal circumstances factors, good or bad mood, etc., are heart rate constantly changing factors.

5. Please Exercise regularly, proper diet, weight control, psychological adjustment, to make themselves more healthy and happy every day.

This equipment has been tested and found to comply with the limits for a Class 3 digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. i his equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause hannful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause hannful interference to radio or television reception. which can be detennlned by tumlng the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Fteorient or relocate the receiving antenna.
– increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different lrom that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(I) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Questions about your M2 Smart Bracelet User Manual Post in the comments!
M2 Smart Bracelet User Manual [PDF]

U8 Smart Watch User Manual

Smart watch U8

Smart watch U8

User Manual

Thank you for choosing our sport healthy intelligent Bluetooth watch. You can read this manual and fully understand how to use the device, with a good experience of the functions and easy operation. This equipment is mainly used brand of smart phones to be adapted to use, you can synchronize the phone book smart phones and provides a variety of useful features and services to facilitate your work and leisure activities in the smart phones operation. This device has the following features: support for Bluetooth phone. Bluetooth message push (SMS, short message, QQ, etc., Need a installation of Bluetooth notification APK on Android smart phone), Bluetooth music player, calories, pedometer, sleep monitoring, antilost, remote camera and so on.

Before you start using this device, please install ‘BT notice’ APK on your smart phone through scanning the QR code on the right, (support Android version, Apple does not currently supported) and run, the smart watch can display the notification/reminders of the application from the Bluetooth connected smart phone synchronously via ‘message’ and ‘distal notice’, including SMS alerts, chat tool QQ, micro letters and other messages and reminders.
QR code

To use the ‘notice’ function, need to open ‘BT notice’ on the smart phone. Restart the phone and smart watches, you can use the Bluetooth connection. Scan the QR code to install ‘BT notice’ application, or visit the following link to download installation package by scanning:

http: //pan.baidu.com/s/lhqsuR7A, search ‘Bluetooth notice’ at Google Play APP store to download and install it. By registering overseas can log on Google Play, then scan the QR code, or visit the link to download the APK.

QR code 1

https://play.google.com/store/apps/details?id=com.oinom.btnotification&hl=zh-CN

The company reserves the right without prior notice to the contents of the manual to make changes.
(1)How to wear and operate.

Wear this Bluetooth smart watch in the correct direction, the power button should be on the right of the watch, three touch buttons located beneath the LCD.

LCD Display

– On/off button, exit buttons: 1) Turn on the watch: press the on/off button power for 2 seconds, the watch shows main interface. 2) Turn off the light: press the on/off button shortly. 3) Turn on the clock: press the on/off button at the third time, the watch shows the clock.Touch keys at lower left corner, Menu/Enter key: Press the Menu/Enter key when the watch is on standby clock interface, to enter main menu interface.

– Middle touch key, dial into/flip key: 1) Press this button when the watch is on main menu interface, to enter dial interface. menu operation as the next flip key, 2) Press dial into/flip key to adjust the volume when playing music and making calls.

– Lower right corner of the touch keys, return/hang up button: standby no effect, like the return menu operation keys, call hang up button.

In addition, Sliding fingers to touch the screen can achieve the following functions:
– Slide you finger around the touch screen: menu page.
– Finger tap the touch screen: enter the menu.
– Finger down from the top of the screen vertical stroke: Exit menu.
Connect to Bluetooth devices, disconnection and continuous connection

There are 2 ways to realize the Bluetooth connection: 1) the watch rise up a Bluetooth connection requirement, 2) the smart phone rise up a Bluetooth connection requirement After a successful connection of Bluetooth, Smart Watch will automatically send a request requires reading smart phone phonebook and call log (involving personal privacy, some smart phone do not turn on this feature) Please confirm the smart phone, or else the watch can not be synchronized to the phone book and call history will affect its normal use.

If the distance between the watch and smart phones is more than 10 meters (there should not be any obstructions, or it might shorten the strength of the signal) they will be automatically disconnected, if the distance can be recover to 10 meters less again within 5 minutes, the connection could be recovered automatically. Both of the watch and smart phone will alarm when disconnection happens.

Features
Bluetooth, search for Bluetooth devices, connection, disconnection and other operations.
– Dialing Press this button when the watch is on main menu interface, to enter dial interface, or dial numbers though ‘call log’ menu.
* Do not block the speaker or microphone position during a call.
– Information Read the short message from the connected smart
phone synchronously
– Phone book synchronization of the phone book.
– Call log Synchronize phone call records of the “missed call”,
“Dialed”, “Received Calls”, “All records”, Maximum 30 records.
– Bluetooth notification Can view the push notifications of
applications like QQ, short messages from connected smart phone.
– Bluetooth music can play music on your smart phone via Bluetooth.
Some smart phones will need to open the music player software to run properly. Press dial into/flip key to adjust the volume of music, Or directly touch the “+”,”-“ buttons on the screen. The watch will return to the initial interface after stopping pressing the key or screen, no need to press exit key manually.
– Remote camera control via Bluetooth smart phone camera to take the pictures.
* The smart phone should not be on the status of screen locking, or this function won’t work properly
– Pedometer
Pedometer designed specifically for health caring customers, to ensure the accuracy of the steps counting, we recommend the user to walk normally with a head and chest rising posture.

On the top of the pedometer displays time counting, on the left is steps counting, the distances (meters) is showing on the right, the consumption of calories is on the bottom. To start/stop the

counting by using the button in the middle. On the right above the screen is settings, it can adjust the parameters, reset or view the records. The pedometer can run in the background.

To avoid false count, the watch will not show up the numbers immediately after taking the initial steps for each user, but it starts to display after a stable walk counting, the number of previous steps is counted already.

* The Pedometer will clear the record of steps at one time everyday, then restart counting and accumulating till next time clearance. User can also clear the record by ‘reset’ button in the option menu.
– Anti-lost alarm When the connected smart phone is far away from watch over a certain distance. The watch will sound an alarm.
– Power saving mode
– Settings the clock setting, The tone mode, volume, language, display settings, view battery power, as well as Bluetooth settings and restore the factory settings.
(4) Bluetooth smart watch can connect to a standard USB data cable.
To charge be battery through computer USB port or USB power
bank.

Note: To reset the watch to default settings, please key in the initial
password “1122”.

FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device is measured RF output power is less than the SAR exclusion threshold value for human head and body. Therefore, SAR test is not necessary.

Questions about your U8 Smart Watch User Manual? Post in the comments!
U8 Smart Watch User Manual [PDF]

Amazfit Stratos A1619 User Manual


Amazfit

Amazfit Stratos A1619 User Manual

Package Contents
1 . Amazfit Stratos Smartwatch
2. USB Charging Cable and Base
3. User Guide

Download the Amazfit Watch App
The companion app is available for iOS in the Apple App Store and for Android in the Google Play Store. Please search for “Amazfit Watch” to download and install the app.

Amazfit QR

Turn Your Watch On/Off
To turn on your watch, press and hold the button on its top right side. Your watch screen will light up and show a startup animation. The animation may play for several minutes upon initial startup.

A QR code will display on your watch screen when it first turns on. This code will be used to pair your watch with your mobile device.

To turn off your watch, press and hold the same button for more than six seconds to display the turn off interface.

Connect Your Watch
Make sure your watch is charged and Bluetooth is activated on your mobile device. Open the Amazfit Watch app and follow the setup instructions. Scan the QR code displayed on your watch screen to pair with your mobile device when prompted.
Connect Your Watch

Charging Your Watch
Attach your watch to the charging base as shown below. Make sure to align the 4 charging pins on the backside of the watch with the ones on the charging base. Connect the charging base to a USB plug or computer via the provided USB cable.  “Charging” will display on the watch screen once clipped in. Please use a power adapter that is rated above 5V and 500mA.

Charging Your Watch

Built-In Battery Precautions
Do not attempt to replace the device’s battery on your own or force open the built-in battery. Use only the official charging base to charge your device.

Safety Notice
1. The watch is water-and dust-resistant with a certified 5 ATM rating. This means the device is resistant to rain, shower and may be used for shallow-water activities like swimming in a pool. However, the watch should not be used for scuba diving, bathing and sauna, or other activities involving high-velocity water or submersion below shallow depth.

2. Please do not operate the watch underwater. After submerging, dry it with a soft cloth before operating or charging.

3. The watch is not protected against chemical reagents, acidic and alkaline solutions, etc. Defects caused by liquid damage are not covered under warranty.

Disposal and Recycling Information
Disposal and RecyclingThe symbol signifies that this product has to be disposed separately from ordinary household wastes at its end of life. Please kindly be aware that this is your responsibility to dispose electronic equipment at recycling centers so as to help conserve natural resources.

Certifications and Safety Approvals
FCCAll Amazfit products have been FCC and CE certified and meet the standards required to retail in the US and Europe.

Regulatory Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1 . This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
FCC ID: 2AC8UA1619

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Technical Specifications
Product Name: Amazfit Stratos
Model Name: A1619
Battery Capacity: 290 mAh
Wireless Connection: Bluetooth 4.0 BLE / Wi-Fi
Input Voltage: 5V DC 0.3A (Max)
Frequency: 2402-2480MHz

Operating Temperatures: 32°F – 104°F / 0°C – 40°C
Water Resistance Rating: 5 ATM / 40 m / 130 ft
Device Requirements: Devices that support Bluetooth 4.0 and run Android 4.4 or iOS 9.0 and above.

Warranty and Return Policy
All Amazfit products are covered by a 1-year limited warranty.
Details at: www.amazfit.com/warranty
Official website: www.amazfit.com
Help: support.amazfit.com
Email us at: [email protected]
Patents: www.amazfit.com/patents

Questions about your Amazfit Stratos A1619? Post in the comments!
Amazfit Stratos A1619 User Manual [PDF]