FCC ID MG3-4350
4352 Comcast XR15 Remote 2015
1. Meet Your Remote
2. Turn On Your Remote
Your remote arrives with the AA batteries already installed, but not activated. Here is how to power it on for the first time.
3. Pair Your Remote for Voice Control
Use Voice Control to search for networks and shows, set DVR recordings, and get recommendations.
Remote not working with your TV?
The remote has to be programmed to the TV and/or audio receiver to control power, volume, and input. Go to the Remote Settings screen on X1 to program control of your TV and audio receiver.
Say “Remote help” to see tips & tricks for using your remote.
Voice command not working?
Make sure you’re pressing the Voice button while you speak into the remote, and release it when complete.
Need to pair with another box?
If you want to use your remote with a different set-top box repeat step 3 while pointing the remote at the box.
Looking for more information?
Visit Xfinity.com/remotes for additional help with Xfinity remotes
5. FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not used in accordance with the instructions, may cause harmful interference to radio communications.
There is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase or decrease the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that which the receiver is connected.
• Consult the dealer or an experienced remote control / TV technician for help.
• It is strongly recommended that the TV be plugged into a separate wall outlet.
The user is cautioned that changes and modifications made to this equipment without the approval of the manufacturer could void the user’s authority to operate this equipment.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC ID: MG3-4352
Questions about your 4352 Comcast XR15 Remote? Post in the comments!
4352 Comcast XR15 Remote Manual [PDF]