Panasonic D-Tech 6.0 Manual KX-TG78XX Phones

Operating Instructions

Panasonic D-Tech 6.0 Manual KX-TG78XX Phones

Model composition
Model composition

*1 Single handset models: Intercom calls can be made between handsets by purchasing and registering one or more optional handsets (page 5).
*2 The following features are provided for these models:
– USB charging (USB jack is on the left side of the base unit)
– Text message alert feature

Accessory information
Accessory information

Introduction

Introduction

1 Replacement batteries may have a different capacity from that of the supplied batteries.

*2 By installing this unit, you can extend the range of your phone system to include areas where reception was previously not available. This product can be purchased online. Please visit our Web site: http://www.panasonic.com/RangeExtender

*3 By registering the key detector (4 max.) to a Panasonic Digital Cordless Phone and attaching it to an easy-to-lose item in advance, you can locate and find the mislaid item to which the key detector is attached. Please visit our Web site:http://panasonic.net/pcc/products/telephone/p/tga20/

Expanding your phone system

Expanding your phone system

*1 Your cellular phone and headset must be Bluetooth wireless technology compatible. For more details and the list of compatible cellular phones, please visit our Web site: http://www.panasonic.com/link2cell

Trademarks
R The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. All other trademarks identified herein are the property of their respective owners.

For your safety
To prevent severe injury and loss of life/
property, read this section carefully before
using the product to ensure proper and safe
operation of your product.

WARNING
Power connection

R Use only the power source marked on the product.
R Do not overload power outlets and extension cords. This can result in the risk
of fire or electric shock.
R Completely insert the AC adaptor/power
plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire.
R Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from
the power outlet, then wiping with a dry cloth. Accumulated dust may cause an
insulation defect from moisture, etc.
resulting in a fire.
R Unplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact the Panasonic Call Center at
1-800-211-PANA (1-800-211-7262).
R Unplug from power outlets and never touch the inside of the product if its casing has been broken open.
R Never touch the plug with wet hands.
Danger of electric shock exists.

Installation R To prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture.

R Do not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an

R Do not allow the AC adaptor or telephone line cord to be excessively pulled, bent or placed under heavy objects.

Operating safeguards

R Unplug the product from power outlets before cleaning. Do not use liquid or
aerosol cleaners.
R Do not disassemble the product.
R Do not spill liquids (detergents, cleansers, etc.) onto the telephone line cord plug, or allow it to become wet at all. This may cause a fire. If the telephone line cord plug becomes wet, immediately pull it from the telephone wall jack, and do not use.

Medical
R Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF
(radio frequency) energy. (The product operates in the frequency range of
1.92 GHz to 1.93 GHz, and the RF transmission power is 115 mW (max.).)

R Do not use the product in health care facilities if any regulations posted in the
area instruct you not to do so. Hospitals or health care facilities may be using
equipment that could be sensitive to external RF energy.
CAUTION Installation and location
R Never install telephone wiring during an electrical storm.
R Never install telephone line jacks in wet locations unless the jack is specifically designed for wet locations.
R Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.
R Use caution when installing or modifying
telephone lines.
R The AC adaptor is used as the main disconnect device. Ensure that the AC
outlet is installed near the product and is easily accessible.
R This product is unable to make calls when:

– the handset batteries need recharging or have failed.
– there is a power failure.

Battery
R We recommend using the batteries noted on page 4. USE ONLY rechargeable
Ni-MH batteries AAA (R03) size.
R Do not mix old and new batteries.
R Do not open or mutilate the batteries.
Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed.
R Exercise care when handling the batteries.

Do not allow conductive materials such as rings, bracelets, or keys to touch the
batteries, otherwise a short circuit may cause the batteries and/or the conductive material to overheat and cause burns.
R Charge the batteries provided with or identified for use with this product only, in accordance with the instructions and limitations specified in this manual.
R Only use a compatible base unit (or charger) to charge the batteries. Do not
tamper with the base unit (or charger). Failure to follow these instructions may
cause the batteries to swell or explode.

Attention:
A nickel metal hydride battery that is recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY
(1-800-822-8837) for information on how to recycle this battery.

Important safety instructions
When using your product, basic safety precautions should always be followed to
reduce the risk of fire, electric shock, and injury to persons, including the following:
1. Do not use this product near water for example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet basement or near a swimming pool.
2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.
3. Do not use the telephone to report a gas leak in the vicinity of the leak.
4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions.

SAVE THESE INSTRUCTIONS

For best performance
Base unit location/avoiding noise The base unit and other compatible Panasonic
units use radio waves to communicate with each other.
R For maximum coverage and noise-free communications, place your base unit:
– at a convenient, high, and central location with no obstructions between
the handset and base unit in an indoor environment.
– away from electronic appliances such as TVs, radios, personal computers,
wireless devices, or other phones.
– facing away from radio frequency transmitters, such as external antennas
of mobile phone cell stations. (Avoid putting the base unit on a bay window or
near a window.)
R Coverage and voice quality depends on the local environmental conditions.

R If the reception for a base unit location is
not satisfactory, move the base unit to
another location for better reception.

Environment
R Keep the product away from electrical noise
generating devices, such as fluorescent
lamps and motors.
R The product should be kept free from
excessive smoke, dust, high temperature,
and vibration.
R The product should not be exposed to
direct sunlight.
R Do not place heavy objects on top of the
product.
R When you leave the product unused for a
long period of time, unplug the product from
the power outlet.
R The product should be kept away from heat
sources such as heaters, kitchen stoves,
etc. It should not be placed in rooms where
the temperature is less than 0 °C (32 °F) or
greater than 40 °C (104 °F). Damp
basements should also be avoided.
R The maximum calling distance may be
shortened when the product is used in the
following places: Near obstacles such as
hills, tunnels, underground, near metal
objects such as wire fences, etc.
R Operating the product near electrical
appliances may cause interference. Move
away from the electrical appliances.
Routine care
R Wipe the outer surface of the product
with a soft moist cloth.
R Do not use benzine, thinner, or any
abrasive powder.

Other information
CAUTION: Risk of explosion if battery is
replaced by an incorrect type. Dispose of used
batteries according to the instructions.

Notice for product disposal, transfer, or return
R This product can store your private/
confidential information. To protect your
privacy/confidentiality, we recommend that
you erase information such as phonebook
or caller list entries from the memory before
you dispose of, transfer, or return the

ENERGY STAR (for KX-TG7841 series)
As an ENERGY STAR® Partner, Panasonic
has determined that this product meets the
ENERGY STAR guidelines for energy
efficiency. ENERGY STAR is a U.S.
registered mark.

Specifications
1. Standard: DECT 6.0 (Digital Enhanced Cordless Telecommunications 6.0)
Bluetooth wireless technology 2.0
2. Frequency range: 1.92 GHz to 1.93 GHz (DECT), 2.402 GHz to 2.48 GHz (Bluetooth)
3. RF transmission power: 115 mW (max.)
4. Power source: 120 V AC, 60 Hz
5. Power consumption: Base unit:*1 Standby: Approx. 1.2 W Maximum: Approx. 4.5 W
Base unit:*2 Standby: Approx. 1.2 W Maximum: Approx. 8.5 W Charger: Standby: Approx. 0.1 W Maximum: Approx. 1.8 W
6. USB Charger:*2 Output voltage: DC 5 V Output current: 500 mA
7. Operating conditions: 0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 % relative air humidity (dry) *1 KX-TG7841 series: page 3 *2 KX-TG7871 series: page 3
Note:
8. Design and specifications are subject to change without notice.
9. The illustrations in these instructions may vary slightly from the actual product.

Setting up Connections

1. If you do not connect the telephone line cord and use only cellular lines, set the cellular line only mode to use this unit more conveniently (page 19). n Base unit (KX-TG7841 series: page 3)

2. Use only the supplied Panasonic AC adaptor PNLV226.

Setting Up

*DSL/ADSL filter (not supplied) is required if you have DSL/ADSL service.

1. Base unit (KX-TG7871 series: page 3)
2. Use only the supplied Panasonic AC adaptor PNLV234.
3. The hook of the base unit is not designed to hold the AC adaptor cord for the desk stand or wall mounting use (page 67).
Base unit

Battery installation

Battery charging

Note when setting up

Note for battery charging

Getting Started

Getting Started

Intelligent eco mode

Controls

Controls

1. Speaker
2. M N (TALK)
3. Headset jack
4. Dial keypad (*: TONE)
5. MZN (SP-PHONE: Speakerphone)
6. Microphone
7. Receiver
8. Display
9. MOFFN
10. MFLASHNMCALL WAITN
11. MNOISE REDUCTIONN
12. Charge contacts

Control type

Control type

Base unit

Base unit

Base Unit Mark

Charging the cellular phone by USB
Available for:
KX-TG7871 series (page 3)

By connecting a USB cable (not supplied) to the cellular phone and the base unit, you can charge a cellular phone. However, the cellular phone cannot exchange data with the base unit through a USB cable.

Charging the cellular phone

Display/Indicators

Display/Indicators

Display/Indicators

Initial settings
n Direct command code: Programmable settings can be accessed by pressing MMENUN, #, and then the corresponding code on the dial keypad (page 36).
Example: Press MMENUN#101.
n Symbol meaning:
Example: MbN: “Off”
Press MCN or MDN to select the words in quotations.

Date and time
Important:
R When you install the batteries for the first time, the handset may prompt you to set date and time. First press MSELECTN, then proceed to step 2.

Handset
1 MMENUN#101
2 Enter the current month, date, and year
by selecting 2 digits for each.
Example: July 15, 2013
07 15 13
3 MOKN
4 Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each.
Example: 9:30
09 30
5 *: Select “AM” or “PM”.
6 MSAVEN a MOFFN

Note:
R When English is selected as the display language, 12-hour clock format is used.
When Spanish is selected, 24-hour clock format is used.
R The date and time may be incorrect after a power failure. In this case, set the date and time again.

Display language
You can select either “English” or “Español” as the display language. The
default setting is “English”.

Handset / Base unit
1 MMENUN#110
2 MbN: Select the desired setting. a MSAVEN
3 Proceed with the operation for your unit.

Handset: MOFFN
Base unit: MEXITN
Voice guidance language You can select either “English” or “Español” as the voice guidance language of the answering system. The defau lt setting is
“English”.

Handset
1 MMENUN#112
2 MbN: Select the desired setting.
3 MSAVEN a MOFFN

Dialing mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.

Handset
1 MMENUN#120
2 MbN: Select the desired setting.
3 MSAVEN a MOFFN

Questions about your Panasonic D-Tech 6.0 Manual KX-TG78XX Phones? Post in the comments!
Download Panasonic D-Tech 6.0 Manual KX-TG78XX Phones Manual [PDF]

Panasonic SC-BTT / SA-BTT Series Manual [BTT770,BTT730,BTT270,BTT273

Blu-ray DiscTM

Panasonic SC-BTT / SA-BTT Series Manual [BTT770,BTT730,BTT270,BTT273

Owner’s Manual
Blu-ray DiscTM Home Theater Sound System

Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely.
Please keep this manual for future reference.

If you have any questions contact
U.S.A. and Puerto Rico : 1-800-211-PANA(7262)
Canada : 1-800-561-5505

THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
≥ Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and receiver.
≥ Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
≥ Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:To assure continued compliance, follow the attached
installation instructions and use only shielded interface cables when
connecting to peripheral devices. Any changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-PANA (7262)

THE FOLLOWING APPLIES IN THE U.S.A. AND CANADA
This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation
of this device.
Contains FCC ID: RYYWYPAEBUX4
Contains IC:4389B-WYPAEBUX4
This transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter.
This product is restricted to indoor use due to its operation in the 5.15 to
5.25 GHz frequency range.

FCC and IC require this product to be used indoors for the frequency range
5.15 to 5.25 GHz to reduce the potential for harmful interference to
co-channel Mobile Satellite systems. High power radars are allocated as
primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These
radar stations can cause interference with and/or damage this product.
This equipment complies with FCC/IC radiation exposure limits set forth for
an uncontrolled environment and meets the FCC radio frequency (RF)
Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC
radio frequency (RF) Exposure rules. This equipment has very low levels of
RF energy that it deemed to comply without maximum permissive exposure
evaluation (MPE). But it is desirable that it should be installed and operated
keeping the radiator at least 20cm or more away from person’s body
(excluding extremities: hands, wrists, feet and ankles).

[BTT770]
THE FOLLOWING APPLIES ONLY IN THE U.S.A.

FCC Note:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications.

However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
≥ Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and receiver.
≥ Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.

≥ Consult the dealer or an experienced radio/TV technician for help.
FCC caution: To maintain compliance with FCC regulations, shielded
interface cables must be used with this equipment. Operation with
non-approved equipment or unshielded cables may result in interference
to radio and TV reception. Any changes or modifications not approved by
the party responsible for compliance could void the user’s authority to
operate this equipment.

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-PANA (7262)

WARNING:
To satisfy FCC RF exposure requirements for mobile transmitting devices,
a separation distance of 20 cm or more should be maintained between the
antenna of this device and persons during device operation.
To ensure compliance, operations at closer than this distance is not
recommended. The antenna used for this transmitter must not be
co-located in conjunction with any other antenna or transmitter.

[BTT770]
THE FOLLOWING APPLIES ONLY IN CANADA.
This Class B digital apparatus complies with Canadian ICES-003.

[BTT770] [BTT370]
THE FOLLOWING APPLIES ONLY IN CANADA.
For main unit
Product Identification Marking is located on the bottom of the unit.

[BTT770]
For wireless system
Product Identification Marking is located on the bottom of wireless system.

IMPORTANT SAFETY
INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow the
safety instructions on the unit and the applicable safety instructions listed
below. Keep these operating instructions handy for future reference.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other.
A grounding-type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
10 Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11 Only use attachments/accessories specified by the manufacturer.
12 Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
13 Unplug this apparatus during lightning storms or when unused for long periods of time.
14 Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.

WARNING
Unit
To reduce the risk of fire, electric shock or product damage,
– Do not expose this unit to rain, moisture, dripping or splashing.
– Do not place objects filled with liquids, such as vases, on this unit.
– Use only the recommended accessories.
– Do not remove covers.
– Do not repair this unit by yourself. Refer servicing to qualified service
personnel.

CAUTION
Unit
– This unit utilizes a laser. Use of controls or adjustments or performance of
procedures other than those specified herein may result in hazardous
radiation exposure.
– Do not place sources of naked flames, such as lighted candles, on this unit.
Placement
To reduce the risk of fire, electric shock or product damage,
– Do not install or place this unit in a bookcase, built-in cabinet or in another
confined space. Ensure this unit is well ventilated.
– Do not obstruct this unit’s ventilation openings with newspapers,
tablecloths, curtains, and similar items

CAUTION

This Owner’s Manual is applicable to models
SC-BTT770, SC-BTT370, SC-BTT270 and SC-BTT273.
Unless otherwise indicated, illustrations in this Owner’s
Manual are of SC-BTT770.
≥ Operations in this Owner’s Manual are described mainly
with the remote control, but you can perform the
operations on the main unit if the controls are the same.

Indicates features applicable to:
[BTT770]: SC-BTT770 only
[BTT370]: SC-BTT370 only
[BTT270]: SC-BTT270 only
[BTT273]: SC-BTT273 only

System SC-BTT770 SC-BTT370 SC-BTT270 SC-BTT273
Main unit SA-BTT770 SA-BTT370 SA-BTT270 SA-BTT273
Speaker system Front speakers SB-HF775 SB-HF370 SB-HF270 SB-HF370
Center speaker SB-HC775 SB-HC370 SB-HC270 SB-HC370
Surround speakers SB-HS270 SB-HS270 SB-HS270 SB-HS270
Subwoofer SB-HW370 SB-HW370 SB-HW270 SB-HW270
Wireless system (with digital transmitter) SH-FX71

≥ Some accessories and external devices mentioned in this Owner’s Manual that are not included with this product may not be on sale in certain regions.

≥ Please note that the actual controls and components, menu items, etc. of your Blu-ray Disc Home Theater Sound System may look somewhat different from those shown in the illustrations in this Owner’s Manual.

Accessory
Check the supplied accessories before using this unit.
For accessories of speakers, refer to page 10.

[BTT770]

BTT370

[BTT270]

[BTT273]

Control reference guide

Control reference guide

Remote control

1 Turn the unit on and off
2 Select title numbers, etc./Enter numbers or characters
(? 34)
[CANCEL]: Cancel
3 Select the source (? 22)
4 Basic playback control buttons (? 25)
5 Select preset radio stations
6 Show status messages (? 25)
7 Display the Home screen of VIERA CAST (? 34)
8 Selection/OK, Frame-by-frame (? 25)
9 Show sub menu (? 26)
10 These buttons are used when;
≥ Operating a BD-Video disc that includes JavaTM
applications (BD-J).
≥ Operating contents of VIERA CAST (? 34)
11 Set the sound mode (? 24)/Select speaker channel
(? 24)
12 Select surround sound effects (? 24)/Set the sleep timer

1 Press and hold [–SLEEP].
2 While “SLEEP ££” is displayed, press [–SLEEP]
several times to select the time (in minutes).
≥ Timer selection is up to 120 minutes.
≥ Select “OFF” when canceling the setting.
≥ To confirm the remaining time
Press and hold the button again.

13 TV operation buttons
[Í]: Turn the television on and off
[AV, INPUT]: Switch the input select
[i j VOL]: Adjust the volume
14 Adjust the volume of the main unit
15 Mute the sound
≥ “MUTE” flashes on the unit’s display, while the function is
on.
≥ To cancel, press the button again or adjust the volume.
≥ Muting is canceled if the unit is turned off.
16 Show NETFLIX screen
17 Select radio stations manually (? 29)
18 Exit the menu screen
19 Show HOME menu (? 23)
20 Show Pop-up menu/Top menu/Direct Navigator (? 25)
21 Return to previous screen
22 [BTT770] [BTT370] : Start up a video communication (? 34)
23 Show Playback menu (? 35)/Select audio (? 25)

Main unit (Front)
Main unit (Front)

1 Standby/on switch (POWER Í/I) (? 19)
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
2 Open or close the disc tray (? 22)
3 Adjust the volume of the main unit
4 Disc tray
5 Stop (? 25)

6 Start play (? 25)
7 SD card slot (? 22)
8 Remote control signal sensor
Distance: Within approx. 7 m (23 ft.)
Angle: Approx. 20o up and down, 30o left and right
9 Display
10 Connect iPod/iPhone (? 32)

POWER-SAVING FEATURES
The main unit is designed to conserve its power consumption and save energy.
[BTT770] [BTT370] Wireless system (SH-FX71) does not have this function.

≥ Automatic power-down function
The main unit will automatically switch to standby mode after
30 minutes if the main unit is inactive as follows.

e.g.
jThere is no audio signal from an external device.
jDisc playback is stopped/paused.
jiPod/iPhone playback is stopped/paused.
jThe disc menu is displayed and play is not selected.
(This function may not work depending on the application
type of discs.)

Main unit (Rear) L

Main unit (Rear) R

1 AC IN terminal (? 18)
2 Speaker terminals (? 13)
3 Cooling fan
4 [BTT770] [BTT370] USB port for the Communication Camera
TY-CC10W (optional) (? 34)
5 LAN port (? 17)
6 HDMI AV OUT (ARC) terminal (? 15)
7 [BTT770] [BTT370] HDMI 1 IN (CABLE/SAT) terminal (? 16)
8 [BTT770] [BTT370] HDMI 2 IN terminal (? 16)

9 FM radio antenna terminal (? 16)
10 DIGITAL AUDIO IN terminal (? 14 , 15)
11 AUX terminal (? 14)
12 VIDEO OUT terminal (? 14)
13 [BTT770] Digital transmitter dock for supplied wireless
system (? 17)
[BTT370] Digital transmitter dock for optional wireless
system (? 12)

Playable discs/Cards

Playable discs/Cards

Discs that cannot be played in this unit
Any other disc that is not specifically supported or
previously described.
1. DVD-RAM
2. Super Audio CD
3. Photo CD
4. DVD-Audio
5. Video CD and Super Video CD
6. WMA discs
7. DivX discs
8. PAL discs
9. HD DVD
10 BD-Video discs recorded at a rate of 50 fields/sec

Region management information
BD-Video

This unit plays BD-Video marked with labels containing the
region code “A”.
Example:

BD-Video

DVD-Video
This unit plays DVD-Video marked with labels containing the
region number “1” or “ALL”.
Example:

DVD-Video

Finalize
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded by
a recorder, etc. needs to be finalized by the recorder to play on
this unit. Please refer to the recorder’s instructions.
BD-Video
This unit supports high bit rate audio (Dolby Digital Plus, Dolby
TrueHD, DTS-HD High Resolution Audio and DTS-HD Master
Audio) adopted in BD-Video.
Music CD
≥ Operation and sound quality of CDs that do not conform to
CD-DA specifications (copy control CDs, etc.) cannot be
guaranteed.
≥ The digital audio content side of a DualDisc does not meet
the technical specifications of the Compact Disc Digital
Audio (CD-DA) format so playback may not be possible.
3D
≥ 3D videos and 3D still pictures can be played back when this
unit is connected to a 3D compatible TV using a High Speed
HDMI Cable.
≥ 2D video can be enjoyed as 3D virtually. (? 27)

Unit and media care
Unit and media care

SD card

Using the remote control

Using the remote control

Questions about your panasonic SC-BTT / SA-BTT Series Manual [BTT770,BTT730,BTT270,BTT273]? Post in the comments!
Download panasonic SC-BTT / SA-BTT Series Manual [BTT770,BTT730,BTT270,BTT273]Manual [PDF]