Mpow Bluetooth Headphones Manual and Pairing Instructions

Charging the headset

You must charge the headset fully(more than 6 hours) before using the headset for the first time.

1.Connect the USB charging cable to the USB chargeport of the headphone.
2.The indicator light will turn into red when charging.
3.The full charge takes about 2 hours.
4.The red indicator light goes out and turn into bluewhen charging completed.

Low-Voltage alert:

When the indicator turns into red and alert tone “battery low” sounds indicate that the battery has run out, need to charge as soon as possible.

Power on/off the headset

Power on: Press the “MPOW” button about 3 seconds until the blue indicator flash. You will also hear the indication voice “Power On”.
Power off: Press the “MPOW” button for about 3 seconds until the red indicator light flash and then goes off. You will also hear the indication voice “Power Off”.

Pair to your Smartphone

1. Press the “MPOW” button for about 5 seconds until the red and blue lights start flashing alternately.

2. Turn on the Bluetooth function of your phone. Search for the Bluetooth devices and select “MPOW SWIFT”

3.Enter the code “0000” if needed.

4. If paring is successful, the blue light indicator starts flashing. You will also hear the indication voice “connected.”

Remark:

1. Please make sure the headphone is off before pair.
2. It will connect to the pre-set phone automaticallywhen turns on. (Please make sure the Bluetooth function of your phone is on.)

Connect two Bluetooth devices at the same time

1. Pair the Bluetooth headphone to the first phone.
2. After pair successfully, turn off the headset, and also disable the Bluetooth function of the first phone.
3. Pair the Bluetooth headphone to the second phone.
4. After pair successfully, turn on the Bluetooth function of the first phone. Select the “MPOW SWIFT” and click “connect”.
5. Two phones will both connect the headphone at the same time.

Answering a call

For iPhone users:
Selection 1. Press the “MPOW” button.
Selection 2. Press the “Answer” button of your iPhone and check your iPhone call menu. Look for the audio source and select the headphone “MPOW SWIFT”.

For Android User (such as Samsung, HTC, Sony etc. ):
Selection 1. Press the “MPOW” button.
Selection 2. Press the “Answer” button of your phone.

Ending a call

Press the “MPOW” button.

Rejecting a call

Double press the “MPOW” button to reject call when the call is ringing.

Redialing the last called number

Double press the “MPOW” button

Muting the call

1.Double press the “MPOW” button to activate mute function when talking.
2.Double press the “MPOW” button to cancel the mute function when muting.

Playing music

When you are listening to the music, you can press the buttons “Play, Pause, Previous Song, Next song” to select your optimal performance and control the volume.
1. Play/Pause: Short press the MPOW button.
2. Next Song: Long press the button “ – ”.
3. Previous Song: Long press the button “ + ”.
4. Volume Up: Short press the button “ + ”.
5. Volume Down: Short press the button “ – ”